HT1338 What is the Network Icon ?  WHen I get Info it says neighborhood network

What is the Network Icon ?  WHen I get Info it says neighborhood network

Hold down the COMMAND key and drag it off. From Google.

Similar Messages

  • My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • What's the username & password when i connect device from cisco network assistant

    what's the username & password when i connect device from cisco network assistant?
    http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

    Although that may be true...
    If I click the "Connect As..." button it asks for a username and password.
    I've experienced connecting to other user's computers on a network.  To gain access to their computer, I just use their username and password.  I've done this before to transfer files without using a flash drive or burned disk. 
    I'm trying to find out what I'm supposed to log on as to gain access to this device...
         My point is that yes, I'm connected to it by wifi.  Otherwise it wouldn't show up; ha-ha! 
    Is my point really that hard to grasp?

  • What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

    I have five different people using 10 different apple devices on one itunes account in our family.  We have had trouble sharing.  What is the best way to set up itunes on our home network?  We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library.  Our itunes program keeps crashing and dumping everyone's playlists.  So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made. 

    What is the best way to set up itunes on our home network? 
    One iTunes library per person.  One iTunes account per person.
    If people wish to share songs, they can make copies.
    When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

  • What is the BlackBerry Icon?

    Greetings,
    What is the BlackBerry icon on my home screen? I'm on Telus Mobility, but right now I'm connected via Wi-Fi. I don't have BlackBerry Enterprise Server.
    Thanks,
    Shane.
    Z10 STL100-3 (version 10.3.1.2708)
    LTE Playbook (version 2.1.0.1917)
    Solved!
    Go to Solution.

    Hey SGoodman,
    This means that you are connected to the BlackBerry network and can access email and BlackBerry services. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • What's the " ! " icon before the song title? i'm unable to play that song.

    what's the "!" icon before the song title? I'm unable to play that song. Yet, when I try to buy the song again, a box appears and tells me "you have already purchased this song". If there is a record of my buying the song, why can i not play it?

    The exclamation point means that iTunes can't find the track file in the place where iTunes believes the file to be located. Confirm that the track file hasn't been moved or renamed from its original location (you can see the location where iTunes is looking by doing a Get Info on the track in iTunes).
    Regards.

  • What do the little icons mean?!?!

    Hi,
    A quick question, well 2 really!
    I have a specially inquisitive client, who is always asking me difficult questions:
    1) In mail, what do the little icons mean that you sometimes get when opening an IMAP account. They look like little circles next to the inbox name - one has, like, 3 quarters filled in, the other has, maybe, 1/8th filled in... I can't find this information anywhere!
    2) Why does it take longer to show messages for IMAP accounts? I guess its because Mail is checking the synchronisation (or something else) between Mail and the IMAP server, but what's the official line?!?!
    Cheers!
    JS

    Hi James,
    Since no-one else has replied I'll try to answer your question.
    The circle you discribe is shown to the rightside of inbox when the Mail-app is connecting (retrieving) messages. Or when you click on another mail-box such as Trash or Junk. If it's not completing which it should then disappear, Apple suggests you go to DOT-MAC & read your mail there. This is because since the release of Tiger or mid 2005 Mail-app has difficulty reading unread mail from DOT-MAC! But I do find that if it's already open it can sort my in-coming Junk mail OK! And un-read messages. This answers your second question, I hope this helps.

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • When i first inst photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch photoshop it say " photoshop detected graphic hardware is not officially supported if you experience problem ple

    when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks

    Your video card is underpowered for the task.
    Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor":

  • HT3918 what is the beep sound when turning on computer after replacing ram

    what is the beeping sound when turning on imac after replacing memory/RAM ?

    This is the RAM capabilities and specs:
    Maximum Memory
    16 GB
    Memory Slots
    4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    This link, How to remove or install memory, will provide the source to how to install RAM in your model to be sure you do it properly. The modules need to be pressed fairly hard to assure they are properly seated.

  • What is the AlwaysFilter and when it is used for?

    What is the AlwaysFilter and when it is used for?
    Could you explain it in the details.
    Thank you

    jetq wrote:
    Sorry.
    cache.aggregate(AlwaysFilter.INSTANCE, new LongMin("getAge"))
    That doesn't really help.
    Where does AlwaysFilter come from? Is it part of the core API, or a 3rd party library? If the latter, which one? And in what do the API docs for this class not answer your question?

  • HT1420 What will the screen show when I deauthorize all computers?   Will it show them and then I select the ones to authorize?  I don't want to undo or be unable to re-authorize the ones I still want.

    What will the screen show when I deauthorize all computers?   Will it show them and then I select the ones to authorize?  I don't want to undo or be unable to re-authorize the ones I still want.

    "What will the screen show when I deauthorize all computers?  "
    Nothing.  Not sure what you mean.
    " Will it show them and then I select the ones to authorize? "
    No.
    You have to authorize a computer from that computer.  You cannot authorize a computer from another computer.

  • What are the tables impacted when we done the migo

    hi,
    what are the tables impacted when we done the migo.

    The tables invoved are :-
    MARD -   Storage Location Data for Material
    MARC - Plant Data for Material
    MSEG - Document Segment: Material
    MBEW - Material Valuation
    MKPF - Headr : Material Document
    EKBE - History per Purchasing Document
    EBEW - Sales Order Stock Valuation
    Edited by: Briesh Patel on Apr 22, 2008 4:42 PM

Maybe you are looking for