HT1338 why am I getting "error has occurred" or "timed out" every time I try to update?

I have used different wireless connections in different locations so I don't believe it is my connection. Running Lion 10.8.3 Any ideas?

If you mean that you can't update the OS, download and install this:
OS X Mountain Lion Update v10.8.4 (Combo)

Similar Messages

Slow reports giving "An error has occurred: Request timed out" on first run

I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed.
Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re-run them then they come up almost straight away.
This tells me that the report runs and it gets stored in the cache server, which is fine, but I want to be able to eliminate the timeout for the users.
I found a solution if .Net 2.0 is installed (HOW TO: Resolve 'An error has occurred: Request timed out' issue) but my server only has .Net 1.1.
Is there a change to a timeout I can made to the server as it is, or should I install .Net 2.0 and change IIS to use that version of .Net then make the solution change already suggested?
TIA
I should add that the timeout is after around 5 minutes, so the normal changes recommended at note 1198539 doesn't seem to apply, as the timeout happens after the normal 90 seconds expires for some time.
Edited by: Geoff Croxson on Sep 3, 2009 2:02 PM

Will something like this work on an iPhone and where would I locate it? My App Store was working just fine and this last week it's been slower and slower, plus difficulties with downloading and updates. Both my downloads and updates start and then pop up a 'can't install at this time'. I thought it might b my storage space so I started deleting. Well I have plenty of space now and still get same problem.
Now over the last two days I will type in a search to reinstall the apps that I removed and the App Store tells me request timed out.
Help please

HOW TO: Resolve 'An error has occurred: Request timed out' issue

Post Author: fmi-charles
CA Forum: Crystal Reports
After doing a new install of BOE Server software, encountered a problem viewing long running reports on-demand. InfoView displayed: 'An error has occurred: Request timed out.' Couldn't find answers anywhere (not even on this site) that would help me resolve this issue. So, I decided to post the resolution.
The error from this post's subject line is displayed when viewing on-demand reports that run for longer than 90 seconds. If the report was scheduled, it wouldn't have a problem - only viewing on-demand. This issue transpires with the following setup: * M$ Windows 2003 Server * IIS v.6 * .NET 2.0.50727 * BO Enterprise Server XI R2 SP2 * M$ SQL Server 2005
The resolution is to find the 'machine.config' file for your current version of the .NET Framework (e.g. C:\WINDOWS\Microsoft.NET\Framework \v2.0.50727\CONFIG\machine.config). Edit the file and place the following into a new line within the 'system.web' section: <httpRuntime executionTimeout="3600"/>
The timeout is set in seconds.
Then, restart IIS using the command line.

Hello Cristinel -
Thanks for send your inputs but I have solved this error.
I would like that if you solve my this question.
My project's URL is http://www.lampslightingandmore.com/
I want to put w3stander HTML logo in my website.
I have done many error but some error i could not understand.
please click on below url and send me your suggestion how to solve this errors?
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.lampslightingandmore.com%2F
I hope you send your best inputs.
Thanks

Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" while starting my application?

Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorth

Hi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png ‏55 KB

HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Every time I try to update an app or download from iTunes a message appears 'unknown problem has occurred' please help as to why?

Every time I try to update an app or download from iTunes a message appears 'unknown error has occurred' can anyone help as to why this would happen and how to fix the problem? Thanks

Are you using a proxy or a VPN to connect to the internet? If you are, this is possibly the reason why. I suggest using anothe connection which is not a proxy.

HT202159 Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive same message.

Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive the same message. I have uninstalled compressor and tried again. I get same results.

Anti-viral siftware and firewalls can interfer with the MAS.

We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

We're sorry, an error has occurred while processing the request. Please try again. that error comes when i registred the apple care protection plan plzz suggestion me

Call AppleCare.

Every time i try to update my macbook air it says an error occurred during instillation how do i get it to install?

every time I try to update my macbook air it says an error occurs during installation how do I get the updates to install?

Hi,
Have you activated messages on your settings page?
HW

HT4623 Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?

I Get an error every time I try to update Windows 8.1 or update Defender (EXE On top "Class not Registered")

I think my lap top has a lot more problems, then the sun has Hot spots! :)
(not that I am down playing any one's situation, nor want to sound cynical or Condescending).
Though many of my issues have been resolved through a LOT of time, tech support and a couple friends and personal researching.
But I get the "Class not Registered" Every time I try to update Windows,
(I have Mozilla Firefox 30 and Windows 8.1)
On Top of small Error box, I get EXE..on top. But Inside the error box "Class not Registered"
Some of the other issues or problems were self inflicted by not researching properly, so to say the least I am being extremely cautious.
I have the same issue with Class not Registered, and looking for some ideas or hopefully the solution.
After I try running a windows update and any updates for my virus scan "Defender" which is what I believe windows 8 and 8.1 uses, I am not sure about Vista or Windows 7 have, I never used them.
I went right to 8 through a new lap top. Then I got Windows 8.1 (that was about a month ago)
But if anyone does find or even know an answer please reply as soon as you are able, anyone else who may just be reading, if someone gets anything that did work for them, Please Let me know.
Due to time I couldn't read through more Forum suggestions or links that may work for
My Error EXE. "Class Not Registered" :)
BUT will return later in day. Maybe anything I found an answer for I can pass on. i Have had plenty issues since I had a type of crash (Or whatever it was when I was online with a Tech from Microsoft and and he had it so both of us could control the Arrow cursor, I double checked phone number for MS and it checked out legit,
That was the beginning of many days of constant repairing That was back around July 6th 2014 Thanks to everyone who even just reads this, BuddyD

This is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
* Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
* Click Continue or supply Administrator credentials if prompted.
* In the Command Prompt window type the following, and press Enter:
sfc /scannow
Refer this KB article for more information:
http://support.microsoft.com/kb/929833
See this is not a problem of firefox till now. You can check more with microsoft answers site.

Every time I try to update Muse to 2014.3 version in my mac (OS X 10.10.2) I get this error message: "Exit Code: 39 Please see specific errors below for troubleshooting. For example, ERROR: DW042 ... ---- Summary - 0 fatal error(s), 2 error(s) ERROR

Every time I try to update Muse to 2014.3 version in my mac (OS X 10.10.2) I get this error message: "Exit Code: 39 Please see specific errors below for troubleshooting. For example, ERROR: DW042 ... ---- Summary - 0 fatal error(s), 2 error(s) ERROR: Failed CreateAlias ERROR: DW042: ARP Entry couldn't be created for language : es_ES". I've tried both to uninstall the app and run CleanTooler, but there's no way. What else should I do?

Davidv82268468 have you removed and reinstalled Adobe Muse using the steps listed in CC desktop lists applications as "Up to Date" when not installed?

TA48312 Why am I getting the message that I have timed out every time I go to check my purchase history in ITunes

Why am I getting the message that I have timed out every time I go to check my purchase history in ITunes

Reset IE to defaults.
Tools > Internet Options > Advanced > Reset

I get error every time I try to update my iTunes to 11.5.2 on my mac mini w/lion

I get an error message every time I try to update ITunes on my mac mini 10.8.3 while connected to the ap store....help?

You should probably post this in the iTunes forum to get a better chance of answers.

Every time I try and update mu devices from my itunes account I get an error unknown error 9006

every time I try and update mu devices from my itunes account I get an error unknown error 9006

Hey burtonpg,
Thanks for the question. If you are receiving a 9006 error when attempting to update or restore your devices in iTunes, this usually means that there is a conflict with security software on your system:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks,
Matt M.

HT1338 why am I getting "error has occurred" or "timed out" every time I try to update?

Similar Messages

Maybe you are looking for