HT1338 why can't itunes update to the latest version (10.6.3) to my ipod?
i Have the version (10.1.1) itunes and we have downloaded (10.6.3) itunes but it refuses to update what do i do? i have no idea?
Thx Bubbles 3456
Welcome to Apple Communities
You must have Mac OS X Leopard or later to download iTunes 10.6.3
Similar Messages
-
Why can't I update to the latest version of iTunes on my pc?
Why can't I update to the ltest itunes on my PC. It won't recognize my iphone unless I do this.
Hello there.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Why can't I update to the latest version of itunes. My computer tells me an error occured and if it happens again to load manually
Had exactly same problem on iPad1. "Unable to check for update. An error occurred while checking for a software update". Been getting this since 3/7/2012. Apple support said probably server overload. Checked these comments and found answer that worked.
-- Reset device
. Backup your iPhone/iPad to iCloud (very important). Settings>iCloud> Storage and Backup>Backup Now (at the bottom)
. Erase your device. Settings>General>Reset>Erase All Content And Settings
. Device will reset and wipe itself
. When it restarts follow the instructions on screen and setup your device.
You're choices here do not really matter except for restoring From a backup.
Do not restore a backup, chose "Set up as new".
. When complete, the Software Update should now work which will install IOS 5.1
. When installed, Erase the device again (see Above).
. Once erased, follow the Wizard but this time select that you wish to restore from a backup
In iCloud. Select the backup that you took in first step.
. Your device should be back to normal and with IOS 5.1.
This takes time to complete but it worked. Thanks to Glosdeveloper for this. By the way this was an "over the air" update (as opposed to plugged in. -
I recently tried updating to the latest version of Itunes, never had a problem, after downloading the installer attempts the undate I get a dialog box telling me to locate the installer package, I locate the download and I get a message:
the file C: users\eric\appdata\apple\applesoftwareupdate\itunes64.msi is not a vaild insallation package for the product Itunes. Try to find the installation package "itunes64.msi" in a folder from which you can install itunes.
I cant even install because I get the same message.(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Why can i not update to the new version of iPhoto and Garageband through the appstore?
When trying to update, I keep getting the pop-up:
"We could not complete your request
There was an error in the App Store. Please try again later. (null)".
How can I update to the new version?
Im running on the OS X Lion 10.7.4 system for Macbook Pro I have the Version 9.2 of iPhoto and 6.0.4 of Garageband. If that's of any assistance.sig wrote:
Because you don't. You update using Software Update or by going to the Apple web site.
I think iLife is being updated from MAS now, thus the need for a AppleID to update it.
One person had iLife and tried to update with a differnent AppleID and it rejected it, seems they bought a open box machine and iLife was installed using another AppleID for display purposes.
When one reinstalls Lion, and has to install iLife, they have to go to MAS to do it.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications. -
I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?
I can't update to the latest version of iTunes - complains that iTunes10.7.dmg is corrupt?
Surely iTunes should be upgraded automatically? It always has in the past.
Typically a computer does not automatically update itself. This would be highly undesirable in my opinion. What if it was it started doing it just as you were going to do a presentation? I have never heard of iTunes automatically updating itself.
Why do I have to download it again?
You can let Software Update do this if you wish.
And why from the Apple website and not the itunes website?
What iTunes web site? The "iTunes website" is the Apple web site.
And if I do, wont I lose all my playlists, the info from my old phone etc.
No, you shouldn't but once a month somebody complains here than an update wiped their iTunes collection. Not sure I believe them since i don't see how it could do it, but you should always back up first.
I have just bought an iphone 5, delivered today, which wont sync with 10.6.3.
Correct. An iPhone 5 requires iTunes 10.7
When I try to upgrade via iTunes, it tells me that I have the latest version.
Maybe it is the latest version your computer can run with the operrating system version you are using.
At this point I am just going to say it is polite to leave this topic to answer the questions of the original poster (OP). You are facing a pretty different set of issues and you should start your own topic where we can focus on your issues and not get it all muddled up with the OP's. -
When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks -
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
Why can't iTunes find all the album artwork?
Why can't iTunes find all the album artwork?
That would fall under Browsing History. Firefox > History -> Show All History
Firefox doesn't use Temporary Internet Files for anything except Windows Media files.
Type '''about:cache''' in the URL bar and hit Enter. <br />
Disk cache device = List Cache entries -
iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??
You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right? -
Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I updated to the latest version of iTunes and now I can't go into the iTunes Store. Every time I try, the program closes. Any suggetions?
Reading multiple threads here and other sites. Very frustrating without a possible solution in sight so far.
-
i can't update my ipad 1st gen.. it says that 4.2 is the latest version. i'm in Lion and my itune are updated to the latest version. please help!!!
i check everything and it's all up to date....the ipad show up in the device as well.. this is what it looks like
-
My Iphone 4 crahsed a few months ago when I tried to update and i have used Itunes already and it updated to the latest version of itunes but it says there is an erro and cannot be restored, I'm not sure why it is saying that, can I get some help?
Hi Alyssa_fagundes,
Thanks for the question. Based on what you stated, it seems like you need help restoring an iOS device. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario
Maybe you are looking for
-
How do I add more money to my account?
My account has about a dollar left it it. How do I add another $25 to increase the a Balance to about $26.
-
Position function query in XSLT
I have a query regarding XSLT mapping I have two E1EDK03 segments for the same qualifier. But I want the values based on posiotion Example: <E1EDK03 SEGMENT="1"> <IDDAT>012</IDDAT> <DATUM>20110720</DATUM> </E1EDK03> <E1ED
-
Hi, Im adding Menus in the command centre using xml tags, when i do that the first menus submenus gets added correctly but the second menu's 2nd submenu doesnt get added and the third main menu also not getting added. wat could be the problem? can a
-
Can CS3.0 software run on a Windows 8 64 system?
I just bought a new computer -- it runs Windows 8 (64 bits). I would like to install my CS3.0 Design Premium software. Will it run on this system? Is there anything special that I need to know before installing it? A second question -- I also have
-
Can't add drop shadow to text in PSE 6
Everyone says to do Layer > Layer Style > Style Settings. But when I go to Layer Style and try to get to Style Settings, Style Settings is greyed out. (The text in quesiton is already selected.) In fact, I've tried everything possible to get Style