HT1338 windows on mac lion

How to run Microsoft Project on Mac

Install a Virtual Machine software program and then install a versioin of Windows into a virtual machine then install MS Project.

Similar Messages

Remove windows on mac lion

is there any way i can remove windows without goin through the boot camp option coz on my bootcamp i don't have a option to uninstall it...plz help

absolutely yes.
boot from recovery partition
run disc utility
select your whole drive
go partition on right panel
usually bootcamp partition is last - if so:
select bootcamp partition
press small '-' below
confirm everything, apply, wait a moment - partition will be deleted
select main mac partition
take it by small triangle in lower right corner
drag to the bottom
apply
wait
Now you have BC partition removed and main partition resized to utilize space
reboot from repair partition again
run disk utility
repair the whole drive
reboot as usual
use uoyr mac
be happy

Mac Lion Version 10.7.3 not Restoring Windows after force quite

I am getting following error after opening Ooo (Open Office org)
"The application “OpenOffice.org” was forced to quit while trying to restore
its windows. Do you want to try to restore its windows again?"
And nothing is happening after pressing both available button "Restore Windows"
or "Don't Restore Windows".
Even when i am trying to shot down my system Ooo stops me for doing that.
I have to force quite it before restarting/shutting down my system.
Nothing is happening when i am trying to opening any doc or xls file i am
getting same window every time.
I have also tried to install new updated version of Ooo, but problem still
exist.
Steps I followed.
1- Selecte OOo from application list and Make move to trash.
2- Selecte OOo folder from /Users/Fauad/Library/Application Support and make
move to trash.
3- Empty the trash.
4- Install OOo new version.
5- Run it
I have read post about command for terminal like rm -rf .DS_Store
i have tried running it in Appplication, Library/Application support, or on Desktop as well but nothing changed.
As far as i remember the problem is because i have forced quite all open application before shtting down my system.
Please help me how to solve this problem.
Message was edited by: fauad

Fixed it.
It is OS based problem, since MAC Lione store application state when closing
it.
Solution Steps:
1- Move to trash OOo from application folder.
2- The Library folder is hidden by default so use chflags nohidden ~/Library/
command to unhide it.
3- Move to trash all files which contains OOo in there name from users Library
folder and sub folders.
4- Reinstall OOo.
5- Launch Working

I installed windows 7 and by mistake drop mac all partition now i install mac lion how i can download and install it

Time of windows 7 installation i drop / remove all the mac partation. Now i again want to install mac how i can do this i have not mac lion disk and no disk provide at time of purchase please guide me

I tried searching through the other questions here is a question if answer well help answer the first?
How do I figure out what is my sound driver is called? I think Windows calls it High Definition Audio Device however something about the windows is mistaken because I have no sound. But when on the mac side I do not know where to look either. If I can find out what the sound driver is called then I can fined a update download. The other similar questions that were answered suggested that the sound driver needed updated.

HT1338 How can i use my data on windows or mac when i use one of them in the same time?

Hi,
i have a Mac book with 2 operating system, ( Windows& mac). How can i use my data on windows or mac when i use one of them in the same time?
Thank you

The following article(s) may help you.
Resolving duplicate calendars
Resolving duplicate contacts

Windows for Mac....Highly dissapointed with LIon.

I use Windows for Mac for ALL of my studies and now I can not open any of my .doc files...any ideas?

JSMFit4Life wrote:
PowerBook, Mac OS X (10.7)
I'm becoming suspicious of the sheer volume of people signing up to post nonsensical complaints about 10.7. There are obviously a lot of valid issues, but I don't think this is one.
Obviously JSMFit4Life is struggling to understand the difference between Windows and Office. He's also certainly not using a PowerBook running 10.7. The whole thing seems a little contrived.

Need Optical Drive To Install Windows 7 With Lion?

The latest support article regarding Boot Camp 4.0 states that only Windows 7 can be used for new installs using OS X Lion. Further on, the article states a "compatible external optical drive" must also be used. They don't mention exactly what compatible means or the general requirements of the optical drive. I was thinking of purchasing a new Mac Mini but I would also need to have something more for Windows 7 to run. Who could I ask about this "compatible external optical drive"?

Windows on Mac is never going to be 100%, close, and for many, the hardware today 2011 is powerful enough to use VirtualBox and whatever guest OS.
Some more items.
http://reviews.cnet.com/8301-13727_7-20086465-263/boot-camp-4-requires-windows-7 -or-later/
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407

Why won't my Mac Lion recognize Kindle device?

why won't my Mac Lion recognize Kindle device? I want to use files on my Kindle but when I plug in the Kindle USB to the MacBook Pro's port, the computer won't show it or recognize it.

Annoying same with my Android Samsung devices which will when I am in Windows.
You thought you were in MacBook Pro forum which is here:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

Early sat. morning java enabled a new update internally. now I can't get on BNSF website , it says not verified by a trusted source. Is there a patch or fix for this for mac lion system

BNSF help desk says it was an internal update by java and mac users won't be able to use firefox to log on. The update changed things for mac users. The window that popped up said sun.security validator exception. MD2 with RSA disabled. Cannot be verified by trusted source. I really need this web site for my work. I'm also computer illiterate. Is there some kind of patch or fix for mac lion. HELP.

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

Missing files in catalog shared between Windows and Mac

I switch between using Elements 12 on a Mac (Mountain Lion) and a Windows 7 machine while managing a common catalog. The catalog and media are stored on an external USB 3.0 disk drive attached to whichever machine I am using to work.
This setup works fine except that on computer #1, the Organizer “loses” media files computer #2 has worked with, and vice versa. The problem seems to be in the way Elements stores the media file location.
Example:
My external catalog and media drive is named “JS” and assigned drive letter G: on the Windows machine.
File “IMG_0310.JPG” is stored in directory “2007 08 18”.
On the Windows machine the location seen in the Elements Organizer Information panel is “G:\2007 08 18\”.
Using the Mac, Elements reports the file as missing, finds it, and changes the file location to “\Volumes\JS\2007 0818\”.
Returning to the Windows machine, the problem repeats itself and corrects the file location to use Windows-style path names.
This wouldn’t be so bad if Elements was faster reattaching missing files, but the search for the first few reconnects takes a very long time and the whole process grows longer the more work I did on the other machine. This is a major annoyance and time drain.
Elements documentation promotes the use of an external drive for sharing. Someone else must have run into this same problem. Is there a way to configure Elements to overcome the file location problem?
Thanks!
[edit]
I realize PSE 12 is new and many are still on PSE 11. Is anyone using PSE 11 experiencing this issue?

Thank you for the response!
Looking at volume_table there are indeed two entries for the external drive (rows 3 and 5):
The Windows entry on row 3 shows the correct volume serial number in decimal as assigned when the drive was formatted. The hex version is 7A85-0647. The Mac entry on row 5 shows a serial number that doesn't make sense from a Windows or Mac perspective.
This is interesting but I'm not sure what to do with this information. It may not be a bug. It would make sense from a development viewpoint to use the serial number to uniquely identify the drive and have separate entries for each OS tied together by that serial number, allowing the drive path to differ by OS. Although, in this case the serial numbers do not match. Maybe the Mac and Windows versions of PSE 12 are retrieving two different serial numbers and therefore do not see the drive as the being the same, which would be a bug.

Windows for Mac on Macbook Air?

If I buy a macbook air (MC969ll/a) will my "windows for MAC 2004" work on Lion? Will I be able to load my 09 ILife and 09 IWork onto my Macbook Air laptop?

What do you mean by "Windows for Mac 2004"? Are you referring to Office Mac 2004, if so, no it won't work with Lion as it requires Rosetta.
Yes, you will be able to load iWork '09 and iLife' 09 on your MBA. Your new MBA will come with iLife '09 already preinstalled.

Recovering Windows for Mac that is installed on a previous version of Mac.

I recently downloaded the Mac Lion OSX and I haven't installed it because, my Windows Office for Mac is still at my old operating system, Mac OSX
Leopard. I lost my Windows for Mac 2011 CD including its key. How can I recover my Windows for Mac before installing my MAC OSX Lion?

Call Microsoft.
Allan

Sharing files from windows with mountain lion

SINCE THE RELEASE OF LION AND MOUNTAIN LION. I HAVE BEEN UNABLE TO PROPERLY SHARE FILES FROM MY MACBOOK PRO (MID 2009) TO MY WINDOWS DESKTOP (VISTA HOME PREMIUM) WITHOUT LOGGING IN AS A GUEST. I PRESS CTRL+K ON MY MAC, I TYPE IN SMB://IP ADDRESS (NOT GOING TO SAY EXACTLY MY IP IS) AND A LOGIN SCREEN POPS UP. IT ASKS FOR A USER NAME AND PASSWORD. I USED TO ABLE TO LOGIN WITH MY USER NAME THAT'S ON MY MAC AND NO PASSWORD. HOWEVER; SINCE LION AND MOUNTAIN LION HAVE BEEN RELEASED I HAVE BEEN FORCED TO LOOK INTO MY WINDOWS FROM MY MAC AS A GUEST. I NEED HELP FIGURING OUT WHY IM BEING FORCED TO USE GUEST.

Open Keychain Access App, it is in the Utilities folder in the Applications folder. Then look through it for entries for your PC, Like username and or name of PC.
But in the end I don't really think that is going to solve your problem. Like everything with computers at any time something can get screwed up and it happens mostly when you are Upgrading to a New OS over the top of an older OS. This happen with Windows and Mac OS X.
So if my suggestion has no affect on you being able to log in to a Real User Account on the Win PC then it is something that happened durring the upgrade from you older version of OS X to Mt Lion. About the only way to correct that is to wipe the drive and reinstall clean. you can then use a current Time Machine backup to restore just your Files, Programs and Setting from that backup without overwriting the system files of that new install of Mt Lion.

Mac Lion OS print driver for hp color laser jet 1600 & business inkjet 2200

I just brought a Macbook Air (13in) with the new OS Lion. I however have a HP Color Laserjet 1600 and Business Inkjet 2200 that I love, but can't find a printer driver for either. So, my questions are, does anyone know if:
1) there is going to be a mac lion os print driver for hp color laser jet 1600 & Business Inkjet 2200; or
2) is there another way to print to them (i.e., the 2200 uses HPA instead of PS and the 1600 uses PCL)?

Any suggestions re correct driver for windows 7 and HP 4600dn?

HT1338 windows on mac lion

Similar Messages

Maybe you are looking for