HT1338 Wish to upgrade from SL to ML on Mac Pro. Spec says only on Mac Pros from early 2008 but unsure how old my Mac Pro is as it is from work. How do I find out if ok to upgrade to ML?
Wish to upgrade from SL to ML on Mac Pro. Spec says only on Mac Pros from early 2008 but unsure how old my Mac Pro is as it is from work and there are no records. How do I find out if ok to upgrade to ML?
You can write to Apple with the serial number and they can tell you exactly when your MacPro (as opposed to Mac Book Pro) was manufactured.
And in the Apple menu > about this Mac > more info > there should be sufficient detail to narrow it down.
EDIT. These are the specs for the April 2007 version.
"Suggested"
"Best"
Speed of Xeon Processors:
Dual Core 2.66 GHz x2
Quad Core 3.0 GHz x2
Memory:
1.0 GB
2.0 GB
Video Card:
NVIDIA GeForce 7300 GT
ATI Radeon X1900 XT
Video Memory:
256 MB
512 MB
Hard Drive Capacity:
250 GB
500 GB
Optical Drive:
16X "SuperDrive"
16X "SuperDrive"
Price:
Similar Messages
-
I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?
Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I can't download music from my library to my ipod because it says only 5 accounts are allowed to share content. How do I get around this?
Or how do I change the 5 devices. Some are not used anymore
-
HT201364 how can i tell how old my macbook pro is?
how can i tell how old my mac book pro is?
To find out what Mac model you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page. If you're doing this to determine if it's compatible with Mavericks, the simplest way is probably to try downloading it; the Mac App Store will check.
(94053) -
My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!
Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.
iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one. -
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
Have you selected manually manage music?
-
I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!
I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!
-
Error message says only one library per device. My previous computer crashed and now I want to sync with new computer. How do I overcome the error message?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
I am trying to find out if my old Airport Express can be upgraded from WEP to WPA2? If so, does anyone know how to do this? I have a new PC for work reasons and I cannot get online with my WEP password. I realize now this is why my family and friends who bring PC's into the house cannot connect - I need WPA2 for PC, and besides, I should upgrade anyway as this is more secure than WEP. Thanks for any help!
Clone your system.
Install the 10.6.8 Java update.
Clone back from your clone you made before installing the update when finished. -
HT1338 Need to find out if I can upgrade my Mac
I need to find out if my Mac OS X 10.4 Tiger is going to be able to be upgraded so I can upgrade the latest versions of browsers. I am experiencing
problems trying to upgrade the latest versions because they are not compatible with my vintage system.. 5 years old doesn't seem vintage to me. My Mac still works great I can buy a new one.You can update it.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard. -
How can i find out how old my macbook pro is?
I want to find out how old my macbook is without having to take it into a store, is it possible. If so how do i do it
sig,
Stupid mistake on my part - I didn't realize that you simply had to enter your serial number in the 'search' bar - I did and it gives far more info than any other sn website I've visted.
So I bookmarked it.
Thanks,
Clinton -
I have an ipod touch that i would like to restore to factory settings. Having said that the ipod is locked for over 1,000 minutes and i do not know the password. I know the trick of holding down the lock button and home button at the same time until the "Connect to iTunes" message pops up, but the lock button on my ipod does not work. Is there anything i could do? I really could use some help im very stuck!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download. I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John. Who can I contact to find out why I'm not getting the rest of season 7 for download?
Thanks,
ChristyQGarmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale. However, Apple states all sales are final.
Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software. They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed. Apple is the cashier. You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin. Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains. Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund. -
I am trying to access a numbers document in mycloud and it keeps saying I need a newer version. I purchased the upgraded app for my ipad and now I can't seem to upgrade my computer so that I can get access. I went to the app store but it won't let me download the newer version onto my computer? What is the point of putting things in the cloud if I can't access them?
JanNumbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.
Maybe you are looking for
-
Please help. I'm having a problem with my iPhone 4s. It won't turn on. If I leave it alone a few minutes and try the charger it will boot up. But when I finally get it turned on, it simply freezes after a couple of minutes and shuts off again and I h
-
Execution of Immediate SQL in compiled package in two versions of SQL*PLUS
A peculiar problem has risen in our database. Execution of Immediate SQL in compiled package in two versions of SQLPLUS gives different results We have a compiled package with two procedures that contain immediate SQL statements, and these are: +PROC
-
Hi, I could see the XML object data and while accessing a perticular attribute let say "SlotA" it is showing "No such variable Error". I appreciate any of your inputs or suggestions to solve this error. You can find the screen snapshot of the probl
-
Trying to find the name of a particular style of menu
Hi, The Microsoft site has a menu that I love. Please go to the following site, and move your mouse over the "All Products" link on the nav menu.I like how it lists all products grouped by category. One of my clients has a lot of different products a
-
How to select dates by year?
Hi, Lets say I have a table(itemID, datePurchase, itemPrice) and I want to list the sum of itemPrice based on the year of datePurchase. eg. I want the total amount spent in the year 2007 DATEPURCHASE ITEMPRICE 04-OCT-07 300 07-NOV-07 250 17-JAN-08 12