HT1339 how to restore an ipod classic with error 1415

how to restore an ipod classic with error 1415 latest operating system

Hey there beaver17
How are you?
Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
I did the following:
My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
Finally, after the file extraction was done, it began to restore the iPod!!
I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
If it works for you, make sure to share the tip!!
Kind regards
Salvador Rivera

Similar Messages

HT1339 how to restore my iPod classic

I had this 80giPod that I would like to use at my work place. I loss all the music since I purchased this product due to my ignorant. I have so many apple product that i couldn't work this small device. I just couldn't make it work.
Please be advice how to makes this work..my ipod is to big to carry my iphone need wifi to be the music but the small ipod is handy to bring inside my work place.
thank you mariquit

Hello Mariquit,
It sounds like you would like to restore your iPod classic to factory settings. I recommend the following steps:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to connect 2 iPod classics with bluetooth

I am trying to sync photos between 2 iPod classics, iPad4 and iphone 5 with blue tooth. The only devices that are seeing each other is the iPhone and iPad but still hasn't' synced the photos. Why re the apple devices not able to see each other?

Havilah Farm wrote:
Why re the apple devices not able to see each other?
Because that's the way Apple have designed it. They have used a particular Bluetooth protocol that is designed to allow audio to be transmitted to Bluetooth headphones or Bluetooth speakers (for example) and some peer-to-peer gaming between the devices, but not the transfer of files.
To transfer photos, Sync them via your iTunes programme. If you took the photos on the device, transfer them to your computer first and then Sync them with the other devices. For photos that were not taken on the device, they presumably were Synced from your computer originally, so simply Sync them to your other devices from the computer.
By the way, your subject question: "how to connect two iPod Classics with Bluetooth"...
You cannot. The Classic does not have Bluetooth.

How can I reset ipod classic when error message 439 shows?

how can I reset Ipod classic when error message 439 shows?

The easiest solution and apparently the only approved solution via Apple (although a pain if you haven't backed up your device) to restore the phone if you can't figure out the passcode. It will erase everything but if you have a fairly recent backup then you will be fine...you may only lose anything that was added after the last backup. You can also try searching the Apple Support pages and forum to see if there is another solution. Ultimately, it's a plus to a certain degree that there is no easy way to change the passcode....if someone "found" it and wanted to try to get in to it....but it's a pain when it's a situation like yours.
.https://discussions.apple.com/thread/3750135?start=0&tstart=0
http://support.apple.com/kb/HT4113#
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pg 165

HT1339 i cant restore my ipod classic, what do i do? i've tried many times

need help...

Need more info to help
Is there any error message?
Which version of iTunes are you using?
What is the iPod software version as shown in the iTunes summary page?
Why do you need to Restore the iPod? (this may shortlist the problem)

Ipod classic with error message (-48) can it be saved without wiping it??

my ipod is coming up with an error message (-48) and saying it cannot be synched. I would like to put new material on it but cannot. Is there any way of rescueing it without restoring it to factory settings (as I do not want to lose things on it that I don't have on my computer)

To answer your questions:
Are you loading them by using Preview>File>Open, double clicking, or dragging the file? None of the above. I am loading them through 4D. I generate a report on 4D and it opens in Preview.
When this happens can you Open another PDF from the same location? Yes, see details below.
Are you loading these PDFs from the Server or another Mac? From the server. The file is created by a 4D client that resides on my disk but the 4D server which it references is on another computer. I am still shared to that computer and my connection to 4D has not changed as far as I can tell.
I found today (details written in response to another question) that when this happens I can save the file to my own desktop but not to the server. It makes me think there may actually be something happening with my connection. I wonder does a server do any realigning (for lack of a better word) of connections as some connections are lost? While I had the document open (the one that I could not save to the server) I went to the server and opened a document that existed there. I saved the file back to the server with a different name. No problem, it worked just fine. Now I am really confused....
1) A PDF file generated by 4D that has not ever been saved to the server can not be saved to the server via Preview around the time that other people are disconnecting from the server and shutting down their computers for the day. Quitting Preview and regenning the document fixes the problem.
2) The same PDF file that can not be saved to the server can be saved to my own disk.
3) Other files that are already existing on the server can be saved with a different name to the server at the same time as a new document can not.
I wish I felt like I was getting closer to the answer...
Thanks for thinking about it.
Susan

I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

I am having iPod classic 120GB Serial Number:8K913VF:2C7
I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

How can I authorize an iPod Classic with my own Apple ID?

How can I authorize an iPod Classic with my own Apple ID? It belonged to someone else so presumably it has been authorized with another id. Your help and answers are much appreciated.

To make sure the file system is closed properly iPod classics should be ejected from the iTunes interface, or if iTunes isn't running, using the "Safely remove hardware" tool. That message is a standard warning. If the device shows up in iTunes you can configure the selection of media content that you want to sync to it and press the sync button to start the process. iTunes may spend quite a long time "thinking" before any tracks are copied over.
If you think there might be something wrong with the device itself see Corrupt iPod classic for some troubleshooting tips.
tt2

How can I sync my iPod classic with iTunes if I only have an iPad?

How can I sync my iPod classic with iTunes if I only have an iPad?
I recently downloaded music on my iPad via iTunes, but I can't get it to my iPod. Any help?

You cannot. There is no iTunes application on an iPad and iPods cannot sync with an iPad.

I have an IPOD Classic with purchased music and i want to sync it with my itunes account but I keep getting the message your device is synced with another PC. How do I resolve this issue?

I have an IPOD Classic with purchased music and I want to sync it with a different PC but I get the message your device is synced with another PC. How do I resolve this issue? I don't have the previous PC.

I want to sync it with a different PC
On that PC, launch iTunes. From the menu bar top of your screen click Store / Authorize This Computer.

HT1923 how do i sync itunes to my ipod classic with the newest version of itunes?

how do i sync itunes to my ipod classic with the newest version of itunes?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore, can anyone help with this?

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore the ipod, can anyone help?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

HT1459 how do you sync the Ipod classic with windows 8 and Itunes

I am having problems syncing my Ipod classic with Itunes using windows 8. Can anyone help with this problem?

Sync it the same way any other iDevice would be synced on any other version of iTunes running on Windows or a Mac.
Plug it in.
Select the content desired to sync.
Sync.

Ipod Classic with Itunes 12.1 - Warning

First off,
Known issues - immediately after 12 dropped, pretty much all functionality involving Ipod classics was broken. Mac OS recieved a patch that fixed this, Windows has not, and there has been no addressing this issue thus far.
My stuff: Ipod class 120gb 8 years old, windows 7 64bit gaming rig, windows 7 64bit laptop. Gaming rig has been updated to 12.1, laptop was kept in version 11.
The problems: Most common - Ipod will disconnect seconds after being plugged in, leaving no chance to do any diagnosing whatsoever.
Less common - Ipod will show up and be interactable in Itunes, click Sync and get stuck in a never ending loop, stuck on song 1 of X forever, I left it doing that overnight - a good 16 hours - just in case, click restore and get an error 1439 (or similar number, basically same error) Ipod cannot be restored
Least common - upon clicking "restore Ipod" the computer will blue screen, complete system crash resulting in a system recovery or total loss of data
The fix(for me anyway) - use itunes 11 - Thankfully I had an old laptop that still had version 11.something installed on it, I was able to transfer my non-itunes store music to it and everything is just peachy
I reiterate - These are known issues, I have found dozens of forum posts on various websites complaining about just how fantastically broken the itunes 12 update has been, and many people have resorted to downgrading back to 11, a not-so-broken version. But here's the kicker - Itunes version 11.0.0.163 has NUMEROUS problems that result in either failed installation or instant crashes whenever you try to launch it, or if you're lucky just crashes whenever you try and access the Itunes store through it. Good luck trying to find someone to help you with installing these old versions if you run into one of these problems.
If you have an Ipod classic and a windows 7 computer DO NOT update to Itunes 12, it will not work, and most support operators will run you through hours of diagnostics just to prove that your ipods hard drive isn't crapping out from age.

Thank you Bka131! I have exactly the same problem (your most common: appears, then disappearing). I already spent DAYS to try, remove iTunes, drivers, re-intall, uninstall any competitor SW that is able to sync music...
Today, I tried with the latest iTunes just issued (12.1.0.71) and still the same issue: my iPod classic appears for 1 sec in iTunes, then disapear...
This is incredible. Do you know if some people ARE able to sync their iPod Classic with iTunes 12.x? Or do Apple wants to kick out all the "old" iPod Classic and force us to buy new iPxx? I can not believe they could not fix such big bug more quickly ...I did not find any official announcement from Apple that this is a known but unsolved bug ... Very strange as this seems to touch many users…
Do you have a safe place where I can download iTunes 11.xxx?
Mario
iPod Classic 80 Gb wich worked very well since years with my Windows 7 computer...
See also my post iPod Classic 80Gb appearing in OS X and Windows but no more on iTunes 12.0.1.26.

I'm trying to sync my ipod classic with itunes but the error message says that it can't be synced because the required disck can't be found. What does this mean?

I'm trying to sync my ipod classic with my itunes library, but I get a message saying it can't be synced because the required disk can't be found. How do I find what this disk is? I have over 2,000 songs in my itunes library but only 497 sync. Help!

Could any of the music have been sourced on an external USB drive or a network drive? In iTunes, go to one of the songs that won't sync. Bring up the info page, and look at the location of that song on the disk. Does that file and path exist? That could be your problem, especially if they were on a USB drive you forgot about.

HT1339 how to restore an ipod classic with error 1415

Similar Messages

Maybe you are looking for