HT1339 Ipod160gb showing zero capacity, refusing to restore, what is going on?

My ipod is showing zero capacity and is refusing to restore, any ideas?

- Reboot the computer
- Try another USB port
- Try another cable try another cable
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

HT4059 After updating iBooks on my iPad all my PDFs disappeared how do I get them back? I reinstalled the app again and they showed up and thn they disappeared, what is going on?

After updating iBooks on my iPad all my PDFs disappeared how do I get them back? I reinstalled the app again and they showed up and thn they disappeared, what is going on?

By reinstalling do you mean that you deleted the app and redownloaded it ? Deleting an app will remove the app and its contents. Do you have copies of the PDFs in the Books part of your computer's iTunes library so that you can sync them back ?

Help my ipod says it has zero available space. Its a 32gb and it says its 29gb and shows zero megBytes available. Idk whats happening but my ipod is eating itself! I went from 90 photos and 30 movies and 10 apps to 19 photos 5 movies and 6 apps. ***

This all started when i went on vacation and used the wifi the resort offered for free. After 2 days i noticed my device kept saying low memory so i kept deletig some pics and videos but nothing crazy because i knew the videos i were deleting were medium sized videos that should free up plenty space. I cant even open my apps they just close right up as soon as i press them. Im concered because my made a project on an app called splice using videos and music thru my camera roll. I dont want to lose the project. Please i need your help guys. Email is [email protected]

Also guys when i connect my ipod to my itunes it shows all the vids and photos i used to have plus apps. Says i have 15gb free ! Where the **** is that space? Trust me i have bRe bokes on my ipod. Nothing! Why cant i get to the bottom of this.

I have 102 movies on my iTunes. When I access my library on Apple TV, it only shows 27 movies. Any ideas what is going on, or how I can resolve issue?

I restarted computer (PC) and all of my Apple TVs (3), and it still only shows 27 movies. I don't know if these movies are in my iCloud, but they are the same movies for all the Apple TVs.

I ran into this problem this morning, and after spending an hour trying to figure out what the heck happened after the 6.0 upgrade, I finally figured out my problem.
Check the, "Home Videos" category via your Apple TV. I have no idea why this happened after the upgrade, but my videos and playlist now show up in the "Home Videos" category.

I taped for 6 hours, 5hours downloaded to imovie, 6 stopped at 1:01 minutes and showed error 36, does anyone know what is going on. Contacted apple and they could not find the answer.

Hi All, I have a Panasonic SDR-H250GN recorder which I have always used in imovie.
I taped for 6 hours, which became 6 chapters. 5 downloaded, the sixth keeps stopping at 1:01 minutes, imovie stops responding.
It taped to full capacity.
How can I get the final hour downloaded?

Hi Edwardo,
Perhaps there's remnants of that App you're not aware of... what was it?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I am paying for the full cloud membership but some apps are still showing "Try" instead of "Install". What's going on?

What it says. I have the full cloud membership, but in the Creative Cloud app/control panel, some programs show a "Try" button instead of "Install." Is this a glitch and will I have the full versions of all of these apps like I am paying for?

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Ipod classic not allowing access to to music or pod casts - shows zero files in music and pod cast but used space shows 3/4 full it is recognized by itunes sometimes on my pc but unable to view content

ipod classic shows disk 3/4 full but when i look in the folders it shows zero for music and zero for podscasts. i can not access these folders on the ipod or when it does connect to my windows computer thru itunes. it does not connect 90% of the time now. i let it check the disk when it was connected to my pc which did not good - any other ideas? other than restore?

Your iPod filesystem is corrupted, so your music and podcastr is in the Others, this is most likely caused by a slow USB connection, which timeout during sync.
Try the Hard Reset first
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Then do the iPod Disk Diagnostic, in this earlier post by tt2, it wont fix your problem, but help you decide if your iPod is dying and causing the timeouts.
Have a nice day!

Why is my 40GB only showing 16.0GB even after restoring it

please help me, I've now tried everything, my 40GB just one day showed a unhappy ipod with !, so i rebooted it, restored it, and it now only shows 16Gb capacity and available. Where has the rest gone? Is there anything i can do?

hey everbody and anybody! I have this very same problem with a 30 gig 5g ipod video and have found very little help or answers. I had 27+ gig, did a restore because I got write-delay errors, then went to update from itunes library and received an error that I didn't have enough space!! I did the 5 R's, I have the latest software and updates.
I have 27 gig in my library (5000+ songs) and now I'm stuck with half the ipod I paid for!!!!! in Feb! AAAAAAAARRRRGGGGHHH! I have been looking for help and answers for 5 hours today. help........? somebody...

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

Purchasing Cube -- 0PUR_C01.. "Added record" is showing zero in request

When i try to load the data to this cube, my trasfer record is showing values while Added Record is showing zero values. Whats the problem. Please advise !!

Hi,
Check whether do you have defined the industry sector in R/3. This has to be done before filling the setup table. search the forums with note no 353042.
This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Regards,
Anil Kumar Sharma .P

Number of Page View is showing zero for Site web Analytics Reports

Hi,
We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
count shows 0 for all the dates.
There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
Any help would be appreciated.
Regards,
Vijay

hi
1-first check "Usage and Health Data Collection Proxy" is started, if not started:
find usage proxy id with following command:
Get-SPServiceApplicationProxy
then start service with following command:
$UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
$UsageApp.Provision()
2-check following link:
Popularity Trends populating 0 results
yaşamak bir eylemdir

Limit SC showing Zero value in report SC per cost centre in SRM portal

Hi SRM Gurus,
On executing SC per cost centre report avaialble in SRM 5.0 Portal I am getting value of limit SC as zero. while in all other follow on documents i.e. PO and Invoice its displaying the value.
Is it due to the fact the for Limit Items we don't have any GR/confirmation i.e zero quantity? and the value column field has Sigma symbol on it. so maybe it is multiplying quantity with the value here?
Is this SAP SRM standard for limit items to show zero value in this report ?
Please let me know. Thanks for the help.
Regards,
Varun Dhawan.

SRM experts please help in this regard. Any insights on LIMIT Shopping carts??

Excise invoice showing zero values

Hi all,
          In stock transfer from plant to depots, i have created excise invoice with reference to proforma invoice, but the excise values are not reflecting in excise invoice, i mean to say BED,ECESS ,SCESS are showing zero values....
regards,
ram

Hi lakshmipathi,
                         Its really gud to c u,
                   i have checked the settings as u said,all are perfect,
          onemore thing i wud like to inform u that while creating a sale from plant to customer, excise invoice is coming perfectly with reference to commercial invoice,
           while in stock transfer with reference to proforma excise invoice is not picking values.
regards,
ram

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

HT1339 Ipod160gb showing zero capacity, refusing to restore, what is going on?

Similar Messages

Maybe you are looking for