HT1339 my daughter put a restriction passcode in now i cannot reset to factory settings

my daughter put a restriction passcode in now i cannot reset to factory settings

Why can't you restore it to factory settings? What happens when you try? Any error messages?
B-rock

Similar Messages

  • Iphone 6plus stuck in zoom. Cannot put in passcode because screen is too big. cannot reset to factory settings because I need to login passcode.

    I have an Iphone 6 plus which is stuck in zoom mode.  The screen is to large for me to put in my passcode so I can try to fix the problem. I was going to reset the IPhone on ITunes but it wouldn't allow me to do that without inputting the passcode into the iPhone. How can I get the IPhone out of zoom mode?

    Double-tap the screen with THREE fingers. Then go to Settings/General/Accessibility and turn off Zoom.

  • I just purchased an IPodTouch and I put a Passcode and now I cannot enter into the device at all??????

    I have just purchased an IPod Touch and I put a Passcode and now I cannot enter into the device. How do I enter?????

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • I've forgoten my restrictions passcode. How can i reset my iphone?

    I've forgoten my restrictions passcode. How can i reset my iphone?

    You'll have to restore your phone as a new device in iTunes or Settings>General>Reset>Erase All Content & Settings to remove the restrictions passcode if you cannot remember it. Restoring from backup will merely continue to restore it.

  • I never set up a restrictions passcode.  How do I reset?

    After the last upgrade I added a passcode as requested.  I never set up a restrictions passcode.  How do I reset the restriction passcode?

    Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
    The above comes from here:
    http://support.apple.com/kb/HT4213

  • Have upgraded to 5c and want to give my 4s to parents. Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode. If I erase all content and settings will that take it back to how was when bought? Thanks.

    Have upgraded to 5c and want to give my 4s to parents. Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode. If I erase all content and settings will that take it back to how was when bought? Thanks.

    Hogey1301 wrote:
    Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode.
    Restore the Device as New...  See Section 6 here...
    http://support.apple.com/kb/HT4137
    Hogey1301 wrote:
    Have upgraded to 5c and want to give my 4s to parents.
    Follow the Check List here...
    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • My deceased brother's IPad was given to me but it is locked and passcode protected.  I do not want access to the data on it, but would like to be able to use it.  Can it be unlocked and reset to factory settings?  Thanks!

    My deceased brother's IPad was given to me but it is locked and passcode protected.  I do not want access to the data on it, but would like to be able to use it.  Can it be unlocked and reset to factory settings?  Thanks!

    You can try this: If you can't update or restore your iOS device
    If he had not turned on Find My iPad then it will work, if he had you will run into Activation Lock. If you do run into it you can take a copy of the will (or probate finding if he died without one) and/or a Letter Testamentary and ask if they can look up where he purchased it. If they can, and you have the other documents, they can reset it for you.

  • I acaddently put a restriction passcode and forgot it what should i do tried to restor it bt it didnt help, i acaddently put a restriction passcode and forgot it what should i do tried to restore it bt it didnt help

    i was putting on a passcode for my ipod touch when i hit restrictions and then forgot the passcode for that.Now i can no longer use app store or itunes on my ipod plz help

    Easy but painful.  You need to connect the iPod to your syncing computer and restore the iPod to factory defaults/new iPod.
    If you restore from backup the unknown passcode will be restored.

  • I restored my ipad today and i put in the passcode and now it is not letting me in and keeps disabling itself. i have reset it twice already and nothing has worked.

    i have been trying to unlock my ipad for over an hour.i restored it today and have been putting in the passcode and it won't let me in. the passcode is right.

    TRY FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • HT204306 so my screen is not working so i cant put in my passcode and the apple store said i need to do a reset to factory settings.. having trouble getting past my passcode

    my screen stoped working and the apple tech said I need to restore, but I need to put in my passcode to do that. also tried recovery mode.

    What happened when you tried Recovery Mode?

  • Forgot restrictions passcode. How do I reset it?

    Howl I reset restrictions passcode when I forgot original one?

    The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • I forgot my restriction passcode. How do I reset it?

    I have forgotten my restriction passcode and tried guessing it over a dozen times but to no avail... How can I reset it? (preferrably without doing a factory reset)
    Please help!

    But will it reload only the items that were backed up prior to when I originally set the passcode, or will it pull & reload the items that I currently have backed up.  I believe I set my passcode up over a year ago, so I really don't want to lose everything that I've added in the last year.  Thanks again.

  • Restriction passcode is locked and I can't restore settings

    I've made too many attempts to enter a passcode under restictions....for the life of me I cannot remember what it was....I googled how to reset and was given instructions to go to settings and "restore" settings.  When I click on "restore" it tells me I'm not connected to the intranet? I have wifi in my house and even went as far as connecting the data cable to my laptop and it's still telling me that I'm not connected?  HELP!!

    Hi,
    You'll need to restore it, or connect it to the computer that it's synched with. I can't help you fixing your Internet connection, but try to access the Internet by browsing on Safari. Tell me if there is to Internet even in Safari.
    Franklin

  • I need my restriction pass i reset to factory settings n still was locked cuz its backed up so i need it emailed to me

    help on top if that my cam app locked

    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
      How to reset forgotten Restrictions...: Apple Support Communities

  • Chainged password on ipad and phone now cant accsess itunes store on either device if i reset to factory settings and put in new password will that work

    have i pad and phone chainged password now not able to accsess apps store on either device if i reset to factory settings and enter new password will that solve problem?

    If you only changed your password - not your Apple ID - have you changed it in the settings? Settings>Store>Apple ID - tap the ID and you can make changes in there.
    You should not have to reset to factory Settings so don't resort to that just yet.

Maybe you are looking for

  • Restrict Access in OB52 by Posting Period Variant

    Hello, In our company there are many posting period variants. We want to restrict the access for opening and closing posting periods in OB52 by Posting period variant. i.e. User can open/close for a specific posting period variant and not all. On sea

  • Samsung SCN-4826FN Scanning error via USB cable

    When scanning from the Multifunction Printer(MFP) user interface selecting Scan to PC the scanner is not able to properly connect with the computer. An error message comes up on the screen and says there was a scanning error. I can scan to a USB memo

  • Bose Bluetooth wave III won't sinc with my MacBook Pro. What should I do?

    I purchased a Wave III with Doc & Bluetooth adapters. How do I connect to my MacBook Pro & iPhone 5?

  • Analysis for Office support multi thread?

    Does Analysis for Office support multi thread/core? If so, what verison? I tried searching around this site as well as note 1466118 - Hardware & Software requirements for Analysis, edition for MS Office but was unable to find an answer. I am on an In

  • Formula on Structure Row

    I have a structure row (dimension) named "Struct" from BEx query, basically I would like to create a formula to format the date of the structure. In Webi, I used variable editor to create a new variable dimension called "StructTest". However when app