HT1341 Epson Stylus SX435W otherwise known as Workforce 435. Although Apple promises software drivers on-line attempts at downloading and ADDING repeatedly come up with drop down menu "...it is not currently available from the software server". Please hel

Epson Stylus SX435W otherwise known as Workforce 435. Adding Driver to an iMac
Although Apple promises software drivers on-line, my attempts at downloading and ADDING it to my iMac
repeatedly come up with drop down menu "...it is not currently available from the  Software update server". Please help?
I have downloaded all the Epson Printer Software but I cannot make the final step.

Reset the printing system and then try adding the printer again.
http://support.apple.com/kb/ht1341
(You have installed, not just downloaded the Epson driver, right?)

Similar Messages

  • Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

    Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

    You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
    Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

  • HT3669 What does this mean?  Can't install the software for the HP Photosmart A510 series because it is not currently available from the Software Update server."  My Imac finds the printer b ut when I go to install it, I get this error.  Please help.

    Can't install the software for the HP Photosmart A510 series because it is not currently available from the Software Update server.

    That means you go here:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
    to get the latest HP drivers.

  • OS 10.8.3 driver fail iP100 Canon "...not currently available from the Software Update server"

    I've downloaded the driver several times. rebooted - verify pref's - and it still gives me the same message. very very very very annoying.
    "Can't install the software for the Canon iP100 series because it is not currently available from the Software Update server"
    Mac OS 10.8.3 all updates current.
    Please help anyone.
    thanks!

    Try downloading and installing the drivers from here:
    http://support.apple.com/kb/DL899
    Hope this helps.

  • When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

    I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

    I have that problem too.  There's many other discussion threads as well.  Either Apple doesn't realize they have a problem, or they do and simply don't care.  Either way, not good.
    There is a workaround that I'm going to try next.  Go to this webpage:
    http://support.apple.com/kb/HT5634
    Scroll down to the middle of the webpage.  Hit "Expand All".  Now, search the webpage for the Apple product name of your computer.  It should be something like "MacBook Pro, 17-inch, Early 2008".  If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
    Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit).  Hopefully you'll find a "4" or "5" there.  Click on that number, to go to the download page for the drivers that you need.  If you just see an empty box there, then you're out of luck....
    Hopefully there will be drivers.  Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32).  Use Disk Utility to format your USB stick if necessary.  Now, you have the drivers you should have gotten from the Boot Camp Assistant download.  You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
    Hope it works!
    Josh

  • When trying to download Boot Camp Windows Support Software, error says: "Can't install the software because it is not currently available from the Software Update server."

    I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
    Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
    Please help!
    Thanks

    You need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.

  • Can't install Server Essentials because it is not currently available from the Software Update server?

    Hi Guys,
    I have just purchased Mac OS X Lion Server. When I launch the Server App I am told I need to download additional software but once the App attempts to do so I get this message "Can't install Server Essentials because it is not currently available from the Software Update server".
    I looked around on the internet and I found a few vague comments stating I may need to insert commands into the Terminal. Can anybody help me please?

    Had the same message myelf but it is there. Somebody posted a link to it, will see if I can find it......
    Thought so, Karlegas found it.

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • "Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server" when I try to install a HP 6300 printer.

    Hi there
    I am trying to install a HP 6300 printer. I can see it when I look to install initially. Then click on installa nd the process starts and I get a message saying it is searching for the software. However after 20 seconds or so I get the message: Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server. This has happned over and over. I have updated the OSx and am 10.8.5. It works on my Mac Book Pro and did once work on the Mac Book Air but stopped so I unistalled and tried to reintsall but no joy. How can i gte the right drivers onto the laptop so that the seach finds them and connects the printer that it already sees?
    Many thanks
    Rob

    Hello there. I understand you are experiencing issues installing your printer on Mac 10.8.5. This document will provide multiple methods on performing this task: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03378792
    Please let me know if you have any other questions or concerns.
    I work on behalf of HP

  • Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

    I recently upgraded to Mountain Lion, and found that I could no longer print to  my HP CM1312nfi.
    This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
    My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
    When I try to download the driver by bonjour or IP, I get the following error message:
    Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
    Is this truly a Software Update server error, and if so, any clue when it will be resolved?
    I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog  lists no devices.
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
    Thanks for your time and attention.

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

    Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

    Open Finder and click on Go > Go to Folder. Then type
    /Library/Printers/Canon
    and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

  • HT204135 not able to add my hp laser jet 3330 mfp printer, I get a message that it is not currently available from the software update server. What do I do?

    how can I installed my hp printer when I get a message that it is not currently available from the software update server?

    The drivers are there.  I see this quite often.  What's happened is the supported devices list on the Mac is a little out of date.  All you should have to do is disconnect the printer from the Mac, run Apple Software Updates, restart the Mac, connect the printer back to the Mac, and add the printer's queue to the Mac.  You can find a little more information on this and other helpful tips in the link below.  Let me know what happens.
    Basic Printer Troubleshooting Steps for Mac
    I am a printer tech for HP.

  • TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

    Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
    I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

    After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then  the "software ... is not currently available..."
    Resetting  the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from  here
    did not help either, downloading Epson Printer Drivers.
    In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
    But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

Maybe you are looking for

  • HP laserjet 100 color mfp m175nw mac osx 10,7,3

    Does the printer  HP laserjet 100 color MFP M175nw work with MAC OS x 10,7?? How can I do

  • Won't burn after updating to iTunes 6.0.1

    I've read several post that are similar, but I seem to have a different error message. Mine say "Disc burner or software not found" when I try to burn a disc. I have an Apple superdrive and it will not burn either purchased music or ripped mp3's from

  • Removing movie clips in arrays

    Hi there I have this code in my Flash file: for(bubble in bubbleArray){      bubbleArray[bubble]._y -= 3;      if(bubbleArray[bubble]._y < 370){           bubbleArray[bubble].removeMovieClip(); I'm wondering, when I remove the movie clips should I al

  • G580 20150 what's actual dedicated video memory?

    I am confused about my dedicated video memory. I was told by the salesman that I got 1 GB dedicated video memory to play high end graphic games. What I could find is only 32 MB dedicated video memory in the system and 1024 MB in Geforce. So please he

  • How to print content inside a scroller in Adobe Air

    Hi experts, I am currently working on an Adobe AIR application that shows the  user some graphical data. As this data is more in height to fit the  screen height, I've placed it inside a scroller. Now I want to take a print of this visual data, mostl