HT1341 how do i fix printer error message,"rastertoescpII"
I am getting an error message when I try to print. It starts out "rastertoescpII" and says it quit unexpectedly and threads have crashed. I reset my printer (an Epson), and other functions including scanning, are still working. Any tips?
Epson Printer Filter Failure
It might be the missing computer name mentioned there...
Similar Messages
-
how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?
Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
How do I fix -50 error message when syncing phoneon Windows 7?
How do I fix -50 error message when syncing phone on Windows 7?
Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail. -
How do I fix this error message??
How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
RichMail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings. -
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
how do i fix; printing error; the adobe print engine has failed to output your data due to an unknow problem.
Things to try:
Reboot.
Remove minor corruption by exporting.
Adobe Community: File Crashing on Output - printing/PDF/other -
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
-
How do I fix the error message
Every time Apple update to their programs I get an Error Message, "TextReaderSetErrorHandler". How do I fix the problem
Just wha are you doing? What do you mean by every time?
If installing iTunes try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
Help pleaseThis is for a special URL that starts with
connectagent://
instead of with
http://
is that right?
Two thoughts:
(1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins.
Find your Garmin plugin change "Ask to Activate" to "Always Activate".
Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
(2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons? -
How do I fix this error message - "sparse bundle is already in use"
Lately, I have been getting the following message that says:
The backup disk image “/Volumes/Kaminski Family Time Capsul/Keith (2).sparsebundle” is already in use.
How might I fix this? Thank you for your time.Unplug the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix this issue 98% of the time. If you are in the unlucky 2%, more help is here:
The Backup disk image ... sparsebundle ... is already in use. -
How do I fix the error message that a USB is taking up too much energy on my Macbook Pro?
Whenever I plug in my iPhone5 to my Macbook Pro, an error message comes up saying that "the USB is taking too much power and will be automatically disconnected".
Purchase a powered hub and plug into that and plug the powered hub into the Mac. Although an iPhone should not be causing those messages unless you have an older Macbook Pro.
-
Hello
I am using Photoshop Elements 8 on Windows 7 (64 bit). I have all my photos stored on an external hard drive connected by usb. The photos were transferred onto the HDD from a Windows XP machine. I bought a new computer so I installed Photoshop 8 and imported all my photos to the organiser from the HDD. I have also taken some photos yesterday which I have uploaded to the HDD.
Now, when I want to delete a photo I check the box to say I want it to be deleted on the hard disk and I get the error message: 'An error has occured while reading files or writing files to disc. The disc may be full or there may bea problem with the source media.' This does not happen with the photos I uploaded yesterday, only the ones which were put onto the HDD from the XP machine.
Please could someone help? I have tried the File>Catalog> repair and optimise functions. I have reinstalled the software. It still does the same.
Thank you in advance
DaveDavid GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing. -
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to? The message came up half way through writing Track 5. So I selected a second set of tracks and got the same error message, this time at Track 3. I tried to play written CD (imation CD-R 1x 52x 700 mb). Opened the tracks using Windows Media Player. First time I was able to play one or two tracks, next time Window Media Player gave me the error message error message C00D0FAB. I have twice before successfully recorded the tracks using a Rode Podcaster, mixed them down and successfully wrote two version of my audio book. Now its not working. Any solutions?
David GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing. -
How do I fix an error message, "not available in the us store"?
Mac 10.6.8, iTunes 10.3.1 2.66 GHz Intel Core i7, with 4GB 1067 MHz DDR3. Error message occurs on wireless and when plugged into ethernet connection.
All I am trying to do is access the store, I have not even tried to view anything and I cannot change my view and cannot get into the store?! I am able to view iTunes University material, but as for music, movies, TV shows, app store, books, podcasts or ping, all same message. If I try to sign in, I am receiving an unknown error message...
-
How do I fix an error message during the installation of Flash on a Macbook running Mavericks?
Hello Everyone,
I'm getting an error message when installing Flash on my Macbook running the most current version of Mavericks. It starts to install, then says "Could not complete installation" and the only option that I have to quit the installation. I have closed all other applications, so I'm at a loss as to what is causing this problem. Please assist.
Thanks!Download the FULL offline installer here: Flash Player 12.0.0.70 (Mac OS X)
Save it (Download Linked File as) and Quit Safari.
Double click the saved file and "mount the DMG" on your desktop.
A window will open with the installer - DO NOT RUN the installer from here!
Right click it or Ctrl+click it and "Show Package Contents"
In Contents/Resources, double click the Adobe Flash Player.pkg
A "COCOA" Installer will open.
Folow the instructions to install Flash Player from there.
Then eject the DMG and you're all done.
Maybe you are looking for
-
Get All the values of a List Row in one call?
I am using workflow 2013 from SharePoint Designer for SharePoint online I need to get all the values of a row in a list. Is there a way to do this in one call from SharePoint farm to the Workflow Manager? Thanks Farida
-
Crystal Reports Server - Scheduling Report Exports
Dear Experts, We are using Crystal Reports Server XI Edition and we would like to schedule report exports. Crystal Reports Server configuration console allows us to automate report exports but apparently we could not find a way to pass report paramet
-
Dreamweaver Help | Set text properties in the Property inspector
This question was posted in response to the following article: http://helpx.adobe.com/dreamweaver/using/set-text-properties-property-inspector.html
-
You used to have a feature that you could have 6 or 8 web add's on the home page
We were able to drag bookmarks onto the home page so you could click on the site you wanted without any fuss every time you used Firefox it was called "speed search??" You could have a number off sites on your home page and just clicked on the one yo
-
How to get a function to return a value occuring after a character
I need to write a function to return the next value occurring after the ":" character in a column. If multiple values of ":" occurs then the function should return the sum of the next value occurring after each ":" in the column. For example a rating