HT1343 how do i switch from using mac to windows?
how do i switch from using mac to windows?
How is Windows installed? If you installed Windows using Bootcamp Assistant then when your computer is powering up press and hold the option key. When the boot manager appears, select either OSx or Windows to boot.
Similar Messages
-
How do I switch from linksys router to my time capsul
how do i switch from using a lynksy router to the time capsule. I use time warner a my service provider. I swtich them out and did the set up works fine for net work but I can not connect to the internet
Whenever you switch routers you must turn off the cable router for a period to allow it to reset the MAC address of the first device to connect. This can be 1min or 15min or longer.. so try shorter period first.. remember the first device that connects to the cable modem captures the IP.
With the whole network off, wait a 1min (or longer) time.
Power on the cable router.. wait 2min for the cable modem to stabilise and connect.
Power on the TC, plugged in to modem.. wait 2min..
Power on the clients.
If it fails to pick up public IP redo with a longer time.
But this only applies for a cable modem.. if is a modem router combined tell us and we can give a different setup.. ie bridged. -
I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?
Are you on CC or standalone perpetual licence?
If the former I believe you merely download LR from the CC site onto your iMac and log in and off you go.
If the latter, download LR onto your Mac from the perpetual licence site (not the CC version), install it and use the same licence number as with your PC. -
I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s
I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/ -
am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor. Appreciate any help. thanks
In Finder... goto Help... In the Search Window type in Displays...
Lots of Useful Information there...
You may find these Links Useful too:
http://www.apple.com/support/mac101/
http://www.apple.com/support/macbookpro/
Cheers, -
HT204388 how do I switch between my mac mini and iMac using iMac screen?
how do I switch between my mac mini and i mac using i mac screen? I thought it was using F2 but that does not seem to work.
To switch between your Mac mini and iMac, you just have to turn on or off Target Display mode. To do it, press Command and F2 keys in your iMac, not only F2
-
How do I switch from Windows to mac?
How do I switch from Windows to mac on a macmini?
Hi,
I assume you are talking about a BootCamp Windows, right ?
If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
There you can choose which Operating System to boot into.
Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan -
I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?
Is a version of Mac OS running on this Mac? Reboot and hold down the option key.
-
Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025
I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
It does indeed do that, & HT4889 seems to be MIA. -
HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate
Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting
-
Can someone please tell me how to remove norton from my Mac.i am using osx 10.5.8
Norton Removal Tool (Symantec Uninstaller):
http://www.symantec.com/business/support/index?page=content&id=TECH103489&locale =en_US -
Many warnings : prevented from using mac address because it is pinned to port
Hi
I am seeing my system log flooded (several per second) with event 28 warnings such as :
Port 'SWITCHPORT-SM-DB9DCFC7-E98D-438C-8998-CC0D9C14ED2B-1-1' was prevented from using MAC address '00-15-5D-00-B2-05' because it is pinned to port 'A0724966-695B-4552-B'.
Source : VMSMP
The environment is 2 X hyper-v 2008 r2 hosts. both have 4 NICs, 3 nics are connected to virtual switches and management OS is not allowed to share the network adapter, and then 1 NIC is obviously used by the host/mgmt OS and no virtual switch connected to
it. I am seeing the warnings on both hosts.
No load balancing or NIC teaming.
All VM's have their MAC addresses assigned dynamically and I cannot see any conflicting MAC addresses.
The warnings are logged for all or most of the MAC addresses and alternate between different "SWITCHPORT-SM-etc,etc" names.
Performance doesn't seem to be degraded, I've run continuous pings for more than an hour with no packet loss, just a single packet spike every now and then. Network access seems fine, Backup Exec 2012 jobs are succeeding, albeit somewhat slower than what
it was.
I don't know when it started, since these warnings have flooded out all else.
At first I thought it had something to do with a VM that I moved from one host to the other, where I copied the VHD accross and then created a new VM and assigned the original IP address to the new virtual NIC in the new VM. I then uninstalled the old hidden
NIC and restarted the VM in question, but that didn't stop the warnings.
Any ideas what could be causing this, or any tips on where I should start looking to isolate the cause ?Got it fixed by creating new virtual switches, moving all VMs over to them, and afterwards deleting all the old virtual switches.
Still no idea what the cause could have been. How bizarre... -
How do I switch from credit card to no card
How do I switch from credit card to no card
Did you follow these instructions as written? The email address has to be one not used with Apple before like in trying to set up an account previously.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
How can I switch from auto_login wallet to password-protected encryption wallet in 12c
--Now the autologin wallet is in effect
SQL> select * from v$encryption_wallet
2 ;
WRL_TYPE
WRL_PARAMETER
STATUS WALLET_TYPE WALLET_OR FULLY_BAC
CON_ID
FILE
/acfs3/wallet
OPEN AUTOLOGIN SINGLE NO
0
--I need to export the keys and it informs me to use password-based keystore
SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
ERROR at line 1:
ORA-28417: password-based keystore is not open
--So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
SQL> administer key management set keystore close;
administer key management set keystore close
ERROR at line 1:
ORA-28365: wallet is not open
SQL> administer key management set keystore open identified by "tde_1234";
administer key management set keystore open identified by "tde_1234"
ERROR at line 1:
ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
So My question is
How to switch from auto_login keystore to password-protected keystore ?Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
If it is not opened, try to open it with administer key statement.
Check the status again. -
firefox hangs up and says it "got confused", when I try to switch from using facebook as myself to using facebook as a page I manage.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Shared services and workspace architecture(How we can find out req &respon)
Good morning Hyperion folks, Does any body have any document or PDF about workspace and shared service architecture...How these both components are communicate each other..any idea or any document..while communicating of these if anything goes wrong,
-
Can you send pic/video messages in texts?
i don't see the option to send pic/vid messages in the sms app...
-
Creative Suite 5.5 design standard middle eastern
Hi, The company I work with her, a few years ago bought this product: Creative Suite 5.5 design standard middle eastern. Where can I find a download link? I need a specific version: ME I have a serial number. Thanks, Amit
-
Anyone having problems downloading new iTunes update?
After trying to download the new iTunes update received an error notice that said iTunes was not installed properly and I needed to re-install. I cannot even access the iTunes program.
-
Image Ready Flash Tween Problem
I have created a SWF in Image Ready that previews correctly, but once uploaded the motion does not fade from one to screen to another - it is a cut. I previewed it in Firefox and Explorer. I am on XP. I am on CS2 (I am cheap). Here is the current tes