HT1349 after installing iso 5.1 verision for my iphone 4 its not getting activated

after installing iso 5.1 version for my iphone 4 its not getting activated

iOS 5.1 is currently in beta and its a developer only release. Discussing more details to this isn't really permitted on the public forums.

Similar Messages

  • After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

    After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?

    Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................

  • I brought iphone 6 for my brother but its not getting start

    i brought iphone 6 for my brother but its not getting start

    Howdy satyafrommumbai,
    Thanks for using the Apple Support Communities.
    It's not clear what the issue is with the iPhone, but if it is unresponsive, then take a look at the troubleshooting in the article below.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Have a great weekend,
    Alex H.

  • My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

    my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

    Can you be more specific about what isn't working?  Are you running iOS 6 or iOS 6.1?
    Did you read the support page on Passbook?  http://support.apple.com/kb/HT5483

  • OBUSOBJECT Blocked for conversion and not getting activated

    I  have changed the infoobject OBUSOBJECT attribute 0Mainusage fron <b>navigational to display</b> and then tried activating the OBUSOBJECT , , OBUSOBJECT If in the former active version this IO had 0MAINUSAGE as a nav attribute, now, in a revised version, this is just display attribute. surprise that the OBUSOBJECT couldn’t be activated by installation.
    Please tell me what are the steps now to resolve this. i want to actiovate the OBUSOBJECT in either old active version or activate with new revisions. i am just stuck since it is not getting activated.
    please tell if i go to se16 and <b>sdokmia</b> table in first row i put BW* and then in
    3 rd row i put what attribute since when i put  0Mainusage (/BI0/OIMAINUSAGE)
    it does not show any record what should i put there?? and then what is the next step. if you can help me step by step.
    please help me to resolve this
    Regards
    Soniya Kapoor

    Hi Soniya,
    If i have understood you properly, you have one attribute of the infoobject navigations, which u changed to display and tried activating and its not getting activated. This particular attribute is used in some othe cube as navigational attribute as well. Without deleting those references, u want to change the infoobject.
    If thats the case, you will not be able to activate ur infoobject. All the reference have to be revoved before activating the object. Sorry for that
    Regards
    Sriram

  • After installing, why is lightroom asking for a serial number, when I am a CC subscriber

    after installing, why is lightroom asking for a serial number, when I am a CC subscriber - I am logged in to my CC account

    I have the same issue. I downloaded for my 30 day trial. My time was up, I started my CC subscription and I'm still prompted for a serial number.

  • Cannot start Xserver after installing Solaris 10 08/07 for Sparc

    Hi,
    Has anyone ecountered the following promblem after installing Solaris 10 08/07 for a Sparc processor .I am trying to exceed to the server but cannot get access to CDE or Gnome as the Xserver is not running!
    getting the following message on booting not sure if related.
    SUNW-MSG-ID: SUNOS-8000-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
    EVENT-TIME: Thu Nov 8 10:07:20 CET 2007
    PLATFORM: SUNW,Netra-T2000, CSN: -, HOSTNAME:
    SOURCE: eft, REV: 1.16
    EVENT-ID: e627d1f9-bd6e-c850-dd0e-a5dbfaa64e48
    DESC: The EFT Diagnosis Engine encountered telemetry for which it is unable to p
    roduce a diagnosis. Refer to http://sun.com/msg/SUNOS-8000-1L for more informat
    ion.
    AUTO-RESPONSE: Error reports from the component will be logged for examination b
    y Sun.
    IMPACT: Automated diagnosis and response for these events will not occur.
    REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is in
    stalled properly. Contact Sun for support.
    I Have ran this pkgchk -n SUNWfmd and there is no response
    I have tried creating the xorg.conf file /usr/X11/bin/Xorgconfig as recommened form a similar thread but this has not worked.
    I can telnet when I try to ssh it is asking me for interactive kb security check and can't login with root password...
    which works when I telent!!
    Has anyone ecountered this before??
    Hendy

    1-Which server are u using? Xorg or Xsun?
    2-did you try /usr/X11/bin/xorgcfg ?
    3-did you try kdmconfig ?

  • I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original p

    I purchased and downloaded Lightroom 5.5. After installing it, I was prompted for the serial number. When I entered it an error message appeared saying it was an upgrade serial number and I need to enter my original purchase number. This was my original purchase, not an upgrade. Now what do I do?

    It sounds like you bought an upgrade from Adobe. How much did you pay? The upgrade is about $80, and the non-upgrade is about $150. If you bought an upgrade version and had no previous version, you would see what you're seeing.
    If that is the case and I were you, I'd call Adobe, and arrange for a refund and to order the correct version.
    Hal

  • HT1414 after installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

  • After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

    After installing Adobe Premiere Pro product CS6 in the program is not active
    PlayBack button setting when creating sequence.
    Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

    Hi,
    Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
    Since you chose to create a DV sequence, you cannot change those settings.
    Do you have DV NTSC clips? If so, these are the correct settings.
    If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
    Once you drag a non-DV clip into the DV sequence, it's OK.
    You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
    Click "Change Sequence Settings" in the dialog box.
    I hope that helps.
    Thanks,
    Kevin

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Cannot install applications because the certificate for .... is not valid

    Hello,
    We have an in house enterprise app that can no longer update.  We have taken the steps outlined here.  These steps include installing a SSL certificate on the server from a trusted CA (GeoTrust) that shows as valid in Safari on OSX.  Also the http to https redirect has been setup and verified in Safari and FireFox.  Addtionally, the plist file's XML has been manually updated to point HTTPS.  New installs work on iOS 7.1 without an issue. 
    However, the program has automatic updates that fail with the message "Cannot install applications because the certificate for .... is not valid".
    The update process works like this:
    A Plist file exists on the server that contains the version number of the build on the server.   The app will download the file and parse it into a NSDictionary then the verison into an NSString.  If the version doesn't match the current version then the user is prompted to install updates.
    When the user says yes to the prompt a UIApplication is sent the Open URL message with a hard coded download URL that looks like this:
    imts-services//?action=download-manifest&url=http://www.example.com/app/Release.plist
    On iOS 7.1 the user will receive the message "Cannot install applications because the certificate for example is not valid".   This error occurs even thought the certificate is valid.  It almost looks like the URL isn't respecing the redirect from the server.
    Has anyone else seen this?  Is there a work around for it?  Or do I have to redeploy the app (with an HTTPS in the hard coded URL)?

    kkoishi, cskimble, OS 7.1 update forced all software installation services to use the HTTPS protocol instead of HTTP. Here is Apache config that adds certificate support and code for changing links in existing *.plist files automatically: http://cases.azoft.com/how-to-fix-certificate-is-not-valid-error-on-ios-7/
    More ideas on Stack: http://stackoverflow.com/questions/20276907/enterprise-app-deployment-doesnt-wor k-on-ios-7-1/22527000#22527000

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" show's up. What should I do?

    My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" shows up. What should I do? I can't lauch Pages till now.

    The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

Maybe you are looking for