HT1349 download issues with tv show

I am dowloading a free tv epsiode and it says it will take over 1000 hours to download and will not let me delete it?

Try tapping and holding down on the show icon and see if the X will pop up to delete the download or swipe across the progress bar and see if the red delete button will pop up.
Restart the iPad and then try again if it fails. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If all of that fails, you may want to finish the download in iTunes on your computer so that you can sync the show and then delete it if you want to. Launch iTunes and go to Store>Check for available downloads to download in iTunes.

Similar Messages

  • GUI Download Issue with Chinese characters

    Hello,
    Currently we are upgrading from 4.7 to ECC. I'm using GUI_DOWNLOAD
    function module to download the data from SAP to desktop. I do have an
    issue with Chinese characters while downloading the file from SAP to ECC.
    In 4.7 the Chinese characters are being downloaded (I haven't used any
    code page) perfectly, but where as in ECC the downloaded file has junk
    characters instead of Chinese.
    Is there any change in the GUI_UPLOAD FM.
    For your reference below is the code present in the program
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        EXPORTING
          FILENAME             = Z_FILENAME
    *****DCDK900543 - Begin of fixing for Unicode conversion ****
         FILETYPE             = 'WK1'
          FILETYPE             = 'ASC'
          WRITE_FIELD_SEPARATOR = ABAP_TRUE
    *****DCDK900543 - End of fixing for Unicode conversion ****
        CHANGING
          DATA_TAB             = I_TAB_TMP
        EXCEPTIONS
          FILE_WRITE_ERROR     = 1
          NO_BATCH             = 2
          INVALID_TYPE         = 3
          UNKNOWN_ERROR        = 4
          OTHERS               = 5.
    Regards,
    Bharath.

    Hi bharat,
    please check whether you ecc 6.0 is uni coded or not (as you upgraded).
    If it is not uni coded then you will not be able to print the Chinese characters.
    You can see whether it is uni coded or not by the following
    in your app toolbar under system click on status.
    There you can see whether your ecc6.0 is uni coded or not.
    Regards,
    koolspy.

  • Thanks to Mandeep5062 Acrobat Pro download issue with Safari

    Before your response arrived I shut down Safari, loaded Firefox, went directly to the Adobe download page and attempted a download. The download started correctly and then switched over to the Creative Cloud downloader and I thought, "Here we go again". However, the process completed and installed the Acrobat Pro software as advertised. This might be a work around others can use that are having issues with Safari.

    Win 7 either comes with a virtural XP machine installed, or it's freelly availible.  I forget which, but this may be a simple solution to your issue. 
    Here's a link that might help:
    http://www.microsoft.com/windows/virtual-pc/
    Thom Parker
    The source for PDF Scripting Info
    pdfscripting.com
    The Acrobat JavaScript Reference, Use it Early and Often
    http://www.adobe.com/devnet/acrobat/javascript.html
    Then most important JavaScript Development tool in Acrobat
    The Console Window (Video tutorial)
    The Console Window(article)

  • Download issues with LR

    Hi
    PLEASE READ my initial queries with this problem.  It seems as though the techs are not taking care in the answers by reading my previous correspondence.
    1. I am a subscriber to creative cloud.
    2. I have downloaded Creative cloud and have the app list. I have  NO problem with this - it is on my desktop and working.
    3. From the Creative cloud app list I have downloaded photoshop with NO problems as well.
    4. When downloading LR5 from the same Creative Cloud app list it fails after 42% - this is the problem (cannot complete download from Creative Cloud apps list )
    5. I have tried using Explorer and Firefox with same results (many times)
    6. My first response from support I was told to go to prodesign page and download from the trial link.
    7. The link from prodesign page does not work, and anyway i do not want a trial as I do not have a 'serial number' because I am a cloud subscriber and as far as is know no-one has given me a serial number for LR or the other programs I have downloaded through the app list.
    8. If there is a serial number for LR please let me have it and I will try and download from an Adobe page.
    9. Also there is a reference to 7 steps to follow when downloading.  I cannot find where these 7 steps are and if I have managed to get as far as downloading the CC apps and photoshop why should downloading LR be any different?
    10. The comment that my pc does not allow cookies - why would the other Adobe programs have no problem in downloading then?
    KGE

    If there is pertinent information in your previous replies on the same subject then including links to those replies would be helpful for those of us who use e-mail to read and respond to the forums.  We cannot see that you have other threads on the same subject without going to the web version of the forums.  I am another Lightroom user like yourself, not someone from Adobe.
    Your replies to previous messages, which I did go to the forums to look for, indicate the ProDesignTools webpages either are not visible to you or do not make sense to you.
    There are seven steps, numbered 0 to 6, on the ProDesignTools webpage within the Very Important Instructions section also previously referred to.  Aside from perhaps some brief periods of server maintenance, which I have never personally experienced, the ProDesignTools webpages are available and do work, so if you cannot even get those pages to come up, it suggests you have issues with connectivity to things on the internet, perhaps due to an iffy connection, or perhaps due to a virus or malware scanner that isn't playing nice.  Why only LR is affected, is unclear.
    Can you confirm if you can see the ProDesignTools pages, and if so, do you see the Very Important Instructions and steps 0 to 6, which involve setting an Adobe authorization cookie, so if you are following steps 0 to 6 and get an error from the Adobe download page that ProDesignTools eventually redirects to, then you might have cookies disabled.  Of course if you can't even see the ProDesignTools pages, then you're getting stopped before anything to do with cookies is occurring.  Being more specific and detailed about what you're doing and what errors or unexpected conditions happen would help the rest of us not be confused as to what your situation is and not give confusing answers.
    However, you are correct that the ProDesignTools trial is the serial-number version, which is different than the Cloud version, or at least that is my experience.  A reason to try the serial-number version would be to see if LR installs for you, in case the 42% that the Cloud installer is stopping at is really a preliminary install step rather than a download step and maybe the serial-number version is easier to see error messages from.  Some times screenshots of your error situation can be helpful.
    Another place to get the LR serial-number version, would be the Adobe updates page:  http://www.adobe.com/downloads/updateswhich would also be the most up-to-date version, LR 5.4, rather than LR 5.0 that the trial might still be.
    If the serial number version of LR installs from either of the above locations, then before trying the Cloud version of LR, again, you'd want to uninstall the serial-number version, and log out of or quit the CC Desktop app, then restart it, so it'll rescan what apps are installed or not.

  • Time Capsule download issues with Windows 7

    Hello together
    My problem is as follows: upload to Time Capsule with two PCs running on Windows 7 (both 32 and 64 bit) and a Mac Book Pro is working without any problems occuring. TC and the two PCs are in the same workgroup and PCs are connected via WIFI in private mode.
    Download from TC to Mac Book Pro works without problems. But in contrast to that, when downloading with the two Windows7-based PCs the connecting is breaking off all the time and the message "Network error" will be displayed. In order to get a new connection to TC the power plug must be unplugged and replugged again. Do you have any advice what to do? Thanks very much in advance.

    Are you using SMB compatible names for the TC and wireless.. short, no spaces.. pure alphanumeric.. If not do so?
    I also recommend using fixed channels and maybe fixed mode. Lock up as much as possible as the PC does not deal as well as the Mac with the auto band, channel and mode switches.
    I am not sure what you mean by this..
    PCs are connected via WIFI in private mode.
    Please explain a bit more.
    Windows wireless drivers are often terrible.. many people have fixed issues by using a more recent driver direct from the wireless card manufacturer.. this is important.. not windows default driver,, not computer manufacturer supplied one.. eg intel card then get latest intel driver from intel.
    Are you running bonjour for windows on the PC's??
    Try using static IP address which also might help.. windows did have issues with dhcp in the past.

  • HT5070 Download issues with purchased tv episode

    I purchased both seasons of Downton Abbey. Episode 6 of Season two will not download and different error messages appear after each attempt. No issues with all other episodes. Please advise.

    Many thanks.
    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Download issue with Oracle 9i DataBase

    I get the 404.htm error when I click the file download link.

    Hi,<br>
    <br>
    There are too many threads about this one. Depend of your desired plateform.
    See Downloads Issues<br>
    <br>
    Nicolas.

  • Partial Phonebook Download Issues with Jeep 8.4AN Uconnect Software

    Is anyone having a similar issue with an iphone 5 os 6.1.4? I just bought a new Jeep GC which comes with 8.4AN Uconnect Software. My phone connects via bluetooth fine but in my phonebook only my A-M contacts are shown. Can anyone help?? Thanks

    I just got an LG G3 and am having the EXACT same behavior, connecting and disconnecting over and over.  Sometimes it will eventually connect (if I let the connecting/disconnecting go on for like 15 minutes).  About 50% of the time I can get in my car and it will work as it should, but the other 50% of the time it plays this game.  Uconnect works 100% perfectly with our Galaxy S5 (with both Kit Kat and Lollipop).
    I'm about to send the G3 back to Verizon.

  • Licensing/Downloading issues with CS5.5?

    Anyone else purchase CS5.5 recently to get the free upgrade to CS6 and run into a bunch of issues?  I purchased Production Premium yesterday (5/3/12), and aside from an initial confirmation email, I've gotten zip since.  None of the programs were showing up on the licensing site (which is now down for "scheduled" maintenance) meaning no chance to download what I bought or get serial numbers, no email with my order number, no history of my order or transaction in my account info, online chat support stating that it's a 72-hour wait to get your downloads/serial numbers instead of the "up to 24 hour" time frame specified by the email, getting transfered from one department to another only to have the call dropped, a 2-hour hold for the licensing support line and no reps available for chat...
    And of course the weekend is upon us so I'll likely have to wait until next week to (hopefully) access the software I purchased.  Kind of ridiculous.  Buy an online product somewhere else and you get download access as soon as you make the payment.  Spend $2000 on Adobe products and get no the runaround about what's going on with the order, why the delay, shoddy support/web services, etc.
    Ugh.  Am I the only one?  Has annyone else made a purchase in the last couple of days without a hitch, namely a Creative Suite product in anticipation of the free upgrade to CS6 when it's released?
    Do other users find this type of experience typical for Adobe purchases/support, or is it usually a hassle-free and straightforward process?  The software itself is going to be fantastic, no doubt, but the ordering process and customer support thus far has been absolutely dreadful. 

    Things are always busy and response times prolonged around the time of a major new release at Adobe.  As you saw, CS6 was released then so there was quite a bit of preparation and cutover going on and increased traffic...  But you should almost always be able to access the free trial downloads to get started with your product right away (no interruption and they're good for 30 days), until the permanent serial numbers arrive.

  • Issue with Date showing Null in interactive report

    I created an interactive report for a customer and was confused to see blanks or more specifically dashes where there should be dates in one of the fields. I knew this field should have data so I did some testing and this is what I have found:
    The sql I am running is:
    select
    assigned_to_company,
    last_resolved_date,
    incident_id
    from
    rhpd0009_im_adherence_rpt2_vw
    When I run the command in SQL workshop I get the following results with data in the last_resolved_date field:
    [http://i83.photobucket.com/albums/j299/yogibayer/apexdateissuesqlcommand.jpg]
    I copied and pasted the SQL from SQL workshop and created a new interactive report and got the following results with no last_resolved_dates showing up:
    [http://i83.photobucket.com/albums/j299/yogibayer/apexdateissueinteractivereport.jpg]
    For some reason the order is different, but the first one INC1117629 shows up in both of them and has a last_resolved_date in SQL workshop, but not in the interactive report. Any help would be appreciated.
    Thank You
    Scott

    Varad,
    It seems to be related to the function we use to convert Remedy dates to Viewable dates. Remedy dates are stored as an integer that represents the absolute number of seconds from Jan 1, 1970 at 12:00 AM. We use a function that converts this number into a human readable date. I have tried encapsulating the result of the function in a TO_DATE and a TO_CHAR with the same results as before. There is something about the resulting data from the date convert function that Apex doesn't like. It would be interesting to isolate what exactly the issue is, but right now I'm just trying to find a work around.
    Thank You
    SCott

  • Download Issues With Different Browsers

    I'm using a simple, simple download example app to fetch a
    file from a tomcat server. It seems to work fine on Mozilla
    fireFox, but when I use it with safari or opera I get the following
    error;
    quote:
    Error #2044: Unhandled IOErrorEvent:. text=Error #2038: File
    I/O Error.
    at
    flexDownloadExample/init()[/Applications/apache-tomcat-5.5.1/webapps/flexDownloadExample/ src/flexDownloadExample.mxml:40]
    at
    flexDownloadExample/___flexDownloadExample_Application1_creationComplete()[/Applications/ apache-tomcat-5.5.1/webapps/flexDownloadExample/src/flexDownloadExample.mxml:2]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at
    mx.core::UIComponent/dispatchEvent()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\co re\UIComponent.as:9051]
    at mx.core::UIComponent/set
    initialized()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\core\UIComponent.as:1167]
    at
    mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\3.0.x\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:698]
    at Function/
    http://adobe.com/AS3/2006/builtin::apply()
    at
    mx.core::UIComponent/callLaterDispatcher2()[E:\dev\3.0.x\frameworks\projects\framework\sr c\mx\core\UIComponent.as:8460]
    at
    mx.core::UIComponent/callLaterDispatcher()[E:\dev\3.0.x\frameworks\projects\framework\src \mx\core\UIComponent.as:8403]
    I have absolutely no idea why this is. I havent been able to
    test this in internet explorer, but i'm guessing it will show the
    same error. My question then is, why is it that the code below
    works for one browser and not for another?

    Font Rendering
    Every browser and operating system and browser and operating sytem version (just about) renders text differently. Chrome on Windows is currently the worst at rendering text, since it's using an old Windows API which uses an outdated anti-aliasing algorithm for the text. So text in Chrome on Windows generally looks worse that text drawn in other browser or on other operating systems. Typekit has a 7 part blog post here <http://blog.typekit.com/2010/10/05/type-rendering-on-the-web/> about all the ins and outs of font display in different browsers and operating systems.
    Scroll Effects
    Scroll effects are measured from the top of the browser window. Thus when the height of the browser window differs, even on the same computer, where the top of the browser window is relative to your objects when the page is scrolled all the way to the bottom will differ. Without the URL for your site/page, this is only a guess, but I suspect this is what you're encountering.
    Several customers have asked for an option to set the key position as a distance from the bottom of the browser window rather than always being from the top in order to create items that have a specific final location when a page is scrolled all the way to the bottom, but Muse doesn't currently have that feature.

  • Download issue with 1 file in 11.5.10+ virtual Documentation Library

    I am unable to download the following document from the 11.5.10+ virtual Documentation Library.
    Title:          Using Oracle Workflow in Oracle Order Management
    Part Number:     A96689-02
    URL:          http://download-uk.oracle.com/docs/cd/B16981_03/current/acrobat/115omwf.pdf
    It seems that whether I try to open it or save the document to disk, it makes no difference. Please can you check whether there is a problem with the file as I am able to download all the other documents on this web site. Please can you correct this issue.
    I would also like to suggest that a single zip file (containing all the documents revised or released since the creation of the original 11.5.10 documentation library CD) be made available so that customers can download all new documents with a single click, without having to download the entire CD.
    Regards
    Mark

    Try replacing download-uk.oracle.com with one of the below:
    download-east.oracle.com
    download-west.oracle.com
    Cheers, OTN

  • CSV Download - issue with quote

    Hi,
    I am trying to downlaod my tabular form using Enable CSV output option in Reports Attribute. The report attribute setting has SEPERATOR as blank(so default comma) and ENCLOSED BY blank(so default ").
    My requirement is after i download i update few data and re-uplaod again which updates the data into my custom tables.
    My issue is, i have a value like -test1/2" size- (only the value between the '-'). So when i download this data and open the csv file in text format i can see the data is downloaded as
    "test1/2"" size"
    It has a enclsoed by as quote but it has added 1 more quote after 1/2"
    Because of this my validation is failing and i am not able to upload the data.
    Can any one help on this issue.
    Please let me know if my question is not clear.
    Thanks,
    Shankar

    Hello,
    Thanks for looking into my issue.
    I tried with follwing options
    Seperated By :
    Enclosed by '
    Seperated By '
    Enclosed by :
    Seperated By blank
    Enclosed by '
    Seperated By '
    Enclosed by blank
    In all the 4 optiosn when i downlaod the csv data i see an extra " after the original value
    Thanks,
    Shankar

  • Authorization Issue with TV Shows

    Yesterday, I upgraded itunes to the latest version and then purchased two tv shows seasons one in HD and the other in SD. I don't have any problems with the SD season but I can't not play HD season because itunes keeps prompting authorize this computer and my computer is already authorized. I uninstalled all apple applications and reinstall, and I did what they recommend here http://support.apple.com/kb/TS1389 but i still have same problem.
    Any suggestions?

    I amno won my 4th call to Apple Support. They are still acting like they don't know anything about this issue. WHen I mention that a lot of people on all platforms are having the same issue, it's as if he wants to ignore me.
    I am now on hold with a supervisor.....I'll let everyone know if this gets anywhere. Evidently, there is some kind of billing upgraade or update that is going on this week, or they are preparing for. He mention that, then seemd to catch himself, like he wasn't supposed to say that. Anyway, if you have support, continue to call and call multiple times until they finally get the message.
    Andrew

  • Lens profile downloader issue with download target dirs (Win7)

    Hi,
    I installed LPD on Windows 7 Ultimate 64bit and did some downloads.
    Now I find that this does not work very nicely.
    a) All downloads end up in adirectory "C:\Users\[username]\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0\Downloaded".
    This is not really where Lightroom is able to find them. The Software is looking in "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\[Maker]"
    b) While the preinstalled profiles have nice speaking names, the downloads for no obviuos reasons get a cryptic name. such as "92713070afd245e19b229e409f089b38.lcp", which makes moving the files to the right place not a fun job, since its not obvious what the content is.
    Anyone with similar or other experience under Win 7?
    I think the first issue is due to LPD trying to save profiles to the right place but not having the rights to do so. The "Roaming" dirs in Windows usually are meant for this I think.
    Any ideas how to solve it?

    Lens Profiles under the ...Roaming are findable by LR/ACR and this is the normal place, so a profile ending up there is by design not because of some system error.  It is a distinct location to keep them separate from the vendor-supplied profiles. 
    The gibberish for the name is to keep files from different sources but with the same name from overwriting each other.  The file is XML so you can certainly look inside the file to see what it is for and rename it to something you like better.
    Do your downloaded profiles not work as you're expecting or are you just seeing things you wonder about and suggesting there could be a problem?

Maybe you are looking for