HT1349 hardware serial number

Why does Apple not recognize my hardware serial number?

You could ask them when you talk to them. We are just your fellow users and not privy to the reasons behind Apple's policies.
Best of luck.

Similar Messages

How to show module and SFP information include hardware serial number on Nexus switch?

How to show module and SFP information include hardware serial number on Nexus switch? Thanks.

Hi,
The show inventory command will give you details of the Nexus chassis, power supplies, Supervisor, Fabric, I/O modules (including FEX if you have them) etc. To get the details of the installed SFP/SFP+ then you'll need to use the show interface transceiver command.
Regards

Read hardware serial number

Hello there
Is there a method of reading the hardware serial number of a NI device?
Thanks
Jannie

For a DAQmx device, you can use a property node. See attached example.
Functions palette >> Measurement I/O (or NI Measurements for LV7) >> DAQmx - Data Acquisition >> DAQmx Advanced >> System Setup >> DAQmx Device Property Node
Put the property node on the diagram >> resize it to add a property
Click on the lower property >> Identification >> Device Serial Number
Wire the device to the ActiveDev property and an indicator to DevSerialNum. The serial number is a hexadecimal value and therefore you should set the string indicator to hexadecimal.
Attachments:
DAQmx device SN.vi ‏19 KB

Hardware Serial Number

I'm trying to convert all my music into another version, but it wont let me Shift+folders, instead i have to do them all 1 song at a time, which is a pain with over 10k songs.
I'm trying to find my hardware serial number for itunes, so that i can ask the express lane, how to convert folders instead of singles at a time (only with devices that sync to itunes) where is this number exactly? and why should i even need to find this number for Itunes, or why isn't it under "my products" like my ipods and iphones?
If any of you could tell me how to convert folders at the same time as answering the above, that would be swell too

You can also zoom in/out in by holding ctrl and 2 fingers on the trackpad or with a mouse scroll wheel.
This can be done on any application, be it web browser/office app, etc...
Its a built in function in Mac OSX.

How to find the hardware serial number of iPhone apart from seeing inside the settings of the handset?

Could anyone help with identifying my iPhone hardware serial number as I'm stuck with connecting the phone to iTunes which is being restored from blank screen?
Thank you.

iPhone: Locating the serial number, IMEI, ICCID, or MEID

Apple care protection will not accept my hardware serial number

Apple care protection plan registration will not accept my hardware serial number.

Call Apple and ask to speak to Agreements Administration.

Hardware serial number on CUCM 6.1 7845-H2

Hi, does someone knows how to grab the hardware serial number of a 7845-H2 with CUCM 6.1 installed on it. On CCM 4.x/Windows platform we had the HP management Web tools that permit to grab the hardware information. How can we do on Linux platform ? any magic command or hidden Menu to get Hardware serial number ?
ssh show hardware does not work
and OS administration Hardware do the same
thanks for your help and link to any documentation.
Regards,
admin:show hardware
HW Platform : 7845H2
Processors : 2
Type : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz
CPU Speed : 2333
Memory : 4096 MBytes
Object ID : 1.3.6.1.4.1.9.1.586
OS Version : UCOS 3.0.0.0-60
RAID Version :
RAID Firmware Version: 4.12
RAID BIOS Version: N/A
BIOS Information :
Vendor: HP
Version: P56
Release Date: 06/28/2007
RAID Details :
Smart Array P400 in Slot 1
Logical Drive: 1
Size: 68.3 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 17562
Stripe Size: 128 KB
Status: Ok
Array Accelerator: Enabled
Has Data On Drive: True
Unique Identifier: 600508B100104B39565730324E480003
Preferred Controller Chassis Slot: 1
Smart Array P400 in Slot 1
Logical Drive: 2
Size: 68.3 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 17562
Stripe Size: 128 KB
Status: Ok
Array Accelerator: Enabled
Has Data On Drive: True
Unique Identifier: 600508B100104B39565730324E480004
Preferred Controller Chassis Slot: 1

i reply to myself, as i have found the work arround from cisco website : http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCso99275
so ssh on the server and run
utils snmp walk 2c public 127.0.0.1 .1.3.6.1.4.1.232.2.2.2.1.0
of course replace public by the snmp community string you have define on your call manager.

Missing software/hardware/serial number.

Hey there.
I have a treo 750 AT&T branded that i got shipped over from the states when the came out and were still unavailable in Australia where i live.
Id love to be able to update it with the 2.25 but the AT&T one i downloaded says it only works with an updater with a service.
Should i be using an unbranded update or am i missing something.
Ironically as well when i hard reset my phone when i got it the software, hardware and serial number were erased in the start/system/about/phone.
Is there anyway to get them back so i can try to get a legit download that will work because this having the time messed up and unable to DST it is making feel like hitting something (probably the phone) with a hammer.
Any help would be appreatiated.
Cheers
Post relates to: Treo 750 (AT&T)

Ok. At this point I tell you, you have the update. Next thing to try is a hard reset of the device. Right now something is wrong with it you should have on that device a remote desktop in the start menu or in the programs. If it is not there we need to see if we can get the device back working correctly. Now this is up to you if you don't mine not seeing the software/hardware/or serial number and not having the remote desktop you do not need to hard reset.
to hard reset go here http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
If you have any questions post back.
Post relates to: Treo 800w (Sprint)

HT1349 The serial number on my new macbook is not recognised

I have just bought a new 13" Macbook Pro from Sydney Duty Free and have tried to register my Applecare Protection. It says my serial number is not recognised. I have called Apple support and they could not help me.

Wait a few more days until the database is updated.

HT1349 Need serial number and it is not showing up where it should be...

my iphone was lost (or stolen) and i need the serial number and IMEI number in order to report it to insurance company. However, when i go into itunes (10) and click on devices (as instructed), my iphone shows up in the list of devices...but when i "hover" over it with the arrow, ONLY my phone # appears. No other #s. Why? Could it be because I has the phone service interrupted? Or could it be that someone stole the phone and wiped it? It no longer shows up on my list of devices in icloud "find my iphone".
please help! thank you.

Hi Modular747,
Thanks for your question...I sure thought I had backed it up on itunes. In the "device" list under "preferences", it does show one back up for this phone -- and when I "hover" my mouse over the back up, the phone number appears...but not the IMEI number (and not the serial number).
Apparently I cannot report my phone lost or stolen without the IMEI number and I am at a loss as to how to find it on itunes. I don't have the packaging or invoice with me. I cannot figure out WHY the phone number appears and the other numbers do not. AT&T keeps telling me that the IMEI number must be there...but I just cant find it.
I also am confused as to why AT&T can't use the serial number to find the IMEI number.
Thanks for any further thoughts or suggestions.

HT1349 The serial number on my apple protection plan is not recognised

Serial number on product apple protection plan not letting us register

You should contact Apple for assistance using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Ask for the agreement administration department. They should be able to fix you up.
Best of luck.

Get hardware serial number over PersonalJava

i was wondering if there's a solution to get the serial number of my iPaq (or my desktops-motherboard) with java.
does anyone has a solution or same problems?

To get the serial number for ipaq, you'll have to go the JNI route. Here's an article about how to do that (at least the C++ part) for PocketPC 2002, http://www.pocketpcdn.com/qa/serial_number2002.html
I don't belive that will work for CE 3.0, but Compaq does have an SDK that will work, you can write the JNI to call their SDK functions. I dont' have the URL for this anymore, but it shouldn't be that hard to find.
-Brad

Invalid Hardware Serial Number - Impossible?

Hi!
I have a MacBook Pro 15" for which I'm trying to shop for memory upgrades. I'm not sure which rev I have (it's either rev D or E) as both have the same clock speed as shown in the system profile, and both have the same model # (3,1), and both have the same graphics card, so comparing the spec sheets to the info in my System Profiler doesn't narrow it down any further than those two possibilities.
So, to try to determine which model I have I went to Apple's website to type in the serial number. I copied and pasted the serial number directly from the System Profiler to assure no user error, and yet I get a message from the Apple Website that says this is an invalid serial number (?!?!?!). I tried appleserialnumberinfo.com's website and it ALSO rejects the number as being invalid.
How can this possibly be? Try it yourself -- The serial # in question is: W7234S0X92 (again, copied directly from System Profiler and pasted into this email).
Apple store visit is impractical at present (I'm on a seagoing vessel) Phone support for Apple is also a dead end -- without a valid serial number the conversation stops right there, and at $1/min for Ocean Phone I can't afford the hold time anyway. Advice on not substituting O for 0, 5 for S, etc. isn't appropriate -- I'm not doing that. I'm COPYING AND PASTING the number from System Profiler. Also I'm NOT accidentally including an extra space at either end. I've done this over and over ad nauseaum.
What I really need to know is, is there another way I can determine exactly what model of MacBook Pro I have? (I'm the third owner, the original owner is dead and the second doesn't know). I'm also interested in knowing why Apple says the computer I am typing this on doesn't even exist, but that's really more an intellectual question than a practical one for me.
Thanks!
Steve M.

Thanks to all who responded -- and so quickly! The info provided is exactly what I'm looking for.
I'd also written to appleserialnumberinfo.com and they not only provided helpful info on the memory but an explanation for the serial number issue as well. I'd forgotten that the previous owner had had the logic board of this MacBook Pro replaced under warranty just before selling it to me. Evidently this repair requires a technician to input the serial number, and the technician inputted it correctly. They also figured out what the correct serial number probably is, and from that I as able to determine that my MacBook Pro is a Santa Rosa model from mid 2007 and based on responses I got from you guys and a check with OWC, my computer can support up to 6GB of memory. So, thanks to all!!!

HT4061 why I can't check hardware serial number of returns ipad?

Hi everybody,
Does anyone know why I can not check the serial of returns ipad via https://selfsolve.apple.com/wcResults.do , please advise
thank you
Peter

Temporarily down maybe
https://selfsolve.apple.com/agreementWarrantyDynamic.do

HT1349 MY SERIAL NUMBER IS ALREADY CLAIMED BUT I HAVE NOT DOWNLOADED OS X MOUNTAIN LION.

I believe the person who was helping me at the store requested for me a download of the operating system but may have located me as in the United States (I do not know if that makes a difference). Either way I never got the confirmation email and I never downloaded OS X Mountain Lion.
Assistance would be appreciated. Thank you.

-Create a bootable install drive for OS X Mountain Lion on USB
-restart and hold cmd + r to access the menu
The issue here is that command-R starts up the machine from the recovery partition, not from whatever bootable install disk you created. So you have to download the system. If you want to start up from the bootable install disk, hold down the option key at startup, with the disk connected.

HT1349 hardware serial number

Similar Messages

Maybe you are looking for