HT1349 hey i got a macbook that went to restart after an update and a blank screen with a file with a ? any ideas
i have a macbook that wont restart it has a white pg with a folder with a ? mark on it !!
serial # W8******YA2
<Edited By Host>
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Similar Messages
-
A friend has just brought me their first generation aluminium macbook that will not start. Start up stops at white screen with curser. Any ideas?
Thanks for the help. I didn't know how to do a safe boot. It allowed me to get into disk utility and that sorted it out.
-
My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...
Now iTunes will not recognize my phone as a device...
-
MacBook Pro won't restart after OS update
Was prompted last night to do an OS Software update. I was running 10.8.3. I started the update and had to run out. When I returned, the screen said i needed to restart my computer to install the updates. I did, and now I can't restart/reboot past the Apple Logo and progress bar which gets to about 1/6th in progress. The computer just shuts down?? Need help please. Thanks!
Hey JamoBook Pro,
If you MacBook Pro does not startup, check out this article that will walk you through troubleshooting and resolving the issue.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Macbook pro failing to restart after new update
After trying to install the new update my MacBook pro fails to restart, its stuck on the Apple logo and then the screen goes black, it wont load in safe mode either. Apple support on the phone tells me that its a coincidence and that the display is shot?
On the bottom of your MBPis the serial number. Enter it here and post back the model and year information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao. -
MacBook Pro won't restart after Mavericks update
I recently installed the new Mavericks update on my MacBook Pro and after downloading Pages, Keynote etc. I had to restart. When I try to restart however, the Apple logo appears with the progress bar but as soon as the bar is full it switches off.
Hello SerenAlyx
Check out the articles below to go over troubleshooting the issue of the grey bar when you are starting up your Mac. It will go over starting up in Safe mode as well as booting to your Recovery Disk to maybe reinstall OS X Mavericks.
Gray progress bar appears under Apple logo during startup
http://support.apple.com/kb/ts3148
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
-Norm G. -
I updated my laptop and now the majority of my contents seem to have been wiped. Is there anything I can do to recover them? My backup was connected at the time so it has already backed-up to the computer's present state. Most photos/ Itunes/ Mail... has been lost. I have some stuff but only up until January 2013.
If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.
If files are present, but seem outdated
You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection. -
I just updated my MacBook Pro to 10.7.5 and got a message that the AppleUSBEthernetHost.kext was improperly installed and cannot be used. How to I find and install this extension?
Open the AppleScript Editor in the /Applications/Utilities/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, throw that item away and then reinstall iTunes.
(114264) -
Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?
What kind of noise?
The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
Allan -
I got my Macbook Pro from another user (different apple id) and now i'm not able to update iPhoto and iMovie. What can i do?
You need to contact Apple and transfer that computer, the serial number, into your name and your Apple ID. Then you should be able to update the included Apple Apps from the App store. No need to Re-buy them again.
Caveat to the above.
If your Mac did not originally come with Lion Preinstalled, early releases of early 2011 models and older, and originally had Snow Leopard installed the original owner should of supplied the Mac OS X System Discs with the system. If that person didn't you should order them from Apple at a small fee, and don't lose them. -
I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....
Try using this article to help with your iPad not showing up in iTunes---
http://support.apple.com/kb/TS1538 -This deals with the device not being recognized in iTunes for Windows
The following steps work well with iPod but i would try them for help with your iPad issue:
Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?
Yeah it seems to be fine although I'm a bit reluctant to fire it up with the Mac just incase. Thanks for the response btw
-
I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs. How can I retrieve this capability? My audiobooks are from Audible.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
Maybe you are looking for
-
I'm a first-time iPhone user (own other Apple products though). I ordered a 4S on pre-order day, received it on release day (via mail). Immediately I noticed that the battery life seemed poor, and I had other problems as well (when calling another ph
-
Another User with HND Problems
I've just installed my WRT610N router today and used LELA for setup. When I went to set up HND I installed Network Magic as I found in instructions on the Linksys web site. I was able to do the initial setup of HND, however, when I went in latter t
-
Where can I get my iPod's headphone port fixed?
I can't hear any music from my headphones and I'm pretty sure it's the iPod's problem.
-
Hi All, Can you tell me the table names from where i can find if mail has been received by recepient successfully or not from SOST. How can i determine the status of the message aswell. Thanks & Regards
-
Error in testing WDR_TEST_ADOBE
Hi SDN, I am getting the following error while testing the above standard application. Change with XML - SST Version 2and ACF button. WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP receive failed wit