HT1349 How can i find out the size and length of my playlist?

How can i find out the size and length of my playlist? Anybody?

It shows up in iTunes on your computer as seen here:

Similar Messages

  • How can i find out the size of video on my iphone 5?

    How can i find out the size of video on my iphone 5?

    As far as I've known, all iPhones (3G/3GS/4/4S/5) sold in China (probably only in China) have this low battery alert sound.
    So called "localization" or what...
    Actually many people found it annoying coz it plays even when the phone is switched to SILENT. However no solution has been found so far
    PS: reeeeeeeally hope Apple could see this thread and at least give Chinese users an option to switch it off!!
    <Edited By Host>

  • How can i find out the resolution and accuracy of PXI-6602 module?

    I have a 32 bit  8 channel PXI-6602 counter module.  PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

    Hi chandhu,
    Were you referring to the accuracy of the count register or the timing clock? 
    PXI-6602 specifications can be found in the NI 660x Specifications.  The resolution of the count register is, as you’ve noted, 32 bits.  This corresponds to a maximum count value of 4,294,967,295.  As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
    On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal.  Again, this is all found in the specifications.
    You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
    I hope this helps.  Please post back if you have further questions.
    Ed W.
    Applications Engineer
    National Instruments

  • HT5730 How can I find out the size (Kb /MB) of software updates?

    My software updates available contains a number of program updates.   I have a daily data allowance of 400 mb.  I want to prioritise my downloads, but cannot make a decision without knowing how big each update is.  So, how can I find this out ?

    This information does not seem to be easily available anymore, in many cases.  See, for instance, the discussion at:
    https://discussions.apple.com/message/22563518#22563518
    Also, be aware that the trend seems to be for updates to be automatically downloaded without user interaction, ready for installation!   You can uncheck "Download newly available updates in the background" inside System preferences under "Software update". I think it is checked by default.
    The best answer, although I don't think it's a great one, seems to be that once you start the download, the download window will show you how big it is.  In previous versions of OS X, the size of the download appeared in the update screen, but has now gone.
    Hope that helps.
    Ivan

  • In itunes for windows how can I find out the size of a playlist I created?

    In Windows using the latest iTunes, how do you bring up the size of a playlist you created in MBs?

    Use CTRL / to display the Status Bar at the bottom of the iTunes window.

  • I cannot update an app because I used a different ID when I purchased it and I have no record of it. How can I find out the ID and password

    I cannot update an App because I used  an ID and password  to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?

    Try here > Associating and verifying email addresses with your Apple ID
    And here > Is there a way to find my Apple ID Name if I can't remember it?
    Frequently Asked Questions About Apple ID

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • How can I find out the screen size of the users moniter using the Acrobat SDK?

    How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
    Thanks,
    Gregory

    Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
    Gregory

  • How can i find out the file size of a Keynote on an iPad please?

    How can i find out the file size of a Keynote on an iPad please?

    I think a rule of thumb is what you're looking for.
    Full bandwidth CD audio (AIFF): about 10 MB/min
    Apple Lossless: about 5 MB/min
    MP3 @ 256k: about 2 MB/min
    MP3 @ 128k: about 1 MB/min
    Of course the MP3 file size is exactly linear with bit rate.
    As for sound quality:
    Apple Lossless is, as the name says, lossless.
    MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
    MP3 @256K: barely distinguishable from CD on very good equipment.
    MP3 @320K: probably not distinguishable from CD.
    I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
    The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

  • How can i find out the height lenght width of that logo in so10 ?

    I have TextName is there in so10.
    How can i find out the height lenght width of that logo ?

    Hi Sam,
    In SE80, you should have a Repository for MIMES, including images.You should find your image here .
    you have to use the following method to get the image as a binary string and then use gui_download to download it to local system
    call method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    exporting
    p_object = fs_stxbitmaps-tdobject
    p_name = fs_stxbitmaps-tdname
    p_id = fs_stxbitmaps-tdid
    p_btype = fs_stxbitmaps-tdbtype
    receiving
    p_bmp = loc_graphic_xstr
    exceptions
    not_found = 1
    others = 2.
    Thn you can find the size of the logo.
    Regards
    Naresh

  • How can I find out the total number of gigabytes of all my photos in Iphoto?

    How can I find out the total number of gigabytes of all my photos in Iphoto?

    In the Event mode open the Info window at the bottom left  (Command+i or click on the blue i button).  Then select all of the Events.  The number of photos and size will be shown in the Info window at the right.
    OT

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • How can I find out the mail server from email address?

    Hi:
    How can I find out the mail server from email address?
    for example: If I know the email address is [email protected],
    how to find the pop3 and smtp mail server?
    THANK YOU

    You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
    The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
    Sean

  • How can i find out the more than one times occurance of integer in a array?

    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

    Kumar_Mohan wrote:
    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
    Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

  • How can I find out the apn number of the battery without having it?

    I dont have the battery of my iphone 5 anymore but how can i find out the apn number of the battery? I would like to change it but i need to know the apn number to choose the right battery.

    Apple does not provide any user-serviceable parts (other than accessories or sometimes a SIM card tray).
    Therefore, there are no legitimate iPhone batteries available for sale anywhere.
    Anything you find will either be salvaged, counterfeit, or stolen.

Maybe you are looking for

  • Delete emails from a specific folder in Exchange 2010 SP1

    Hi all,  Since Exchange 2010 SP1 does not have "-DeleteContent" parameter in mailboxexportrequest any more, how do we delete emails from a specific folder of a user mailbox? (Personal folder, not default folders). Please note that the ASQ for searchq

  • Spam filtering solution for iPhone and a question.

    I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app r

  • Incorrect disk and disk image icons

    I'm running 10.7.4 on an early 2011 MBP with 8 GB RAM. Disk images, CDs, etc appear on the desktop with the generic hard drive icon.  My understanding is that this can be corrected by rebuilding launch services.  Upon rebuilding launch services, usin

  • How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

    I want Change format mask for all fields that type's number Such as if  :parameter_value = 1 then    all fields format mask = ' 999,999,990.000' ; else    all fields format mask = ' 999,999,990.00' ; end if; Regards

  • Problems compatibility iTunes 7 - Musicmatch jukebox 9

    Help!!!!! I've installed in my win xp pro, iTunes 7 + Quicktime. On this pc I've already installed also Musicmatch JukeBox 9. Can anyone give me a solution for this problem? : After the installation of iTunes 7, musicmatch doesn't start and an error