HT1349 how can I merge the information with business cards

im making business cards and instead of typing the same thing a million times, im sure there's a way to merge or something. How do I do this?

laurenfromky wrote:
im making business cards
With what app?

Similar Messages

How can i receive the information from a form ?

I created a form in Dreamweaver CS5 with some input fields and with a send button.
The question is how can I receive the information that is filled in by the visators.
Where can I tell to which email adress the information has to be send. Where can I find this in dreamweaver CS5?
Or what else do I have to do before a form is actually working and I'm receiving the input?
Already thanks
Ron

I'm just starting with building a site
so thanks for this email
2010/11/17 DeonH <[email protected]>
Hi there.
>
I don't know what your capabilities are regarding coding. I am no
programmer and use "Forms to Go" with much success. Take a look here:
http://bebosoft.com/products/formstogo/overview
>
Regards,
Deon
>

HT204150 After upgrading to Windows 8, in my Outlook 2007 Contacts I now have "Contacts in iCloud" and "Contacts from iCloud". How can I merge the two into one Contacts list.

After upgrading to Windows, in my Outlook 2007 Contacts I now have "Contacts in iCloud" plus "Contacts from iCloud". How can I merge the two to avoid duplication.

Hi Ingo 2711,
Thank you for your suggestion. I backup on itunes. I went to itunes, deleted syncing my contacts, then re-synced them. But the Facetime capability option continues to be there on most (not all, for some curious reason) of my contacts. I am not sure I posed my question correctly. I want to be able to FT with my family, so don't want to delete the FT capability totally from my iphone and ipad. But I don't want all these other iphone calls from various contacts to ring on my ipad as FT calls. I want a way to select with whom I have FT capabilities. Any further suggestions? Thanks much, trekpal

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

EBS field how can we get the information that on which form this filed is

we are doing some data mapping activity for datawarehousing if we are given some EBS field how can we get the information that on which form this filed is located is there any good method

Hi Kapoor,
please give also others a chance, and excuse that I get up late on vacation ;-)
Anyway, I'd keep the story creation responder to recognize the copy, then combine it with an observer on the backing xml story to catch the associated XML element which is created there. Something like below:
UIDRef xmlStoryRef = Utils<IXMLUtils>()->GetBackingStore(doc);
InterfacePtr<ISubject> subject ( xmlStoryRef,IID_ISUBJECT );
subject->AttachObserver(observer,IID_IIDXMLELEMENT,observer->GetAttachIID());

HT1349 how can you track you ipod with only serial number ]

2nd Generation ipod Touch

Hello, Tommyty,
I am sorry you have lost your iPod. You don't yet seem to understand that its serial number is not tracked electronically. Here is my attempt at explaining the same thing that Limnos and stevejobsfan0123 have already told you.
Tommytj wrote: ... HT1349 how can you track you ipod with only serial number ] ...
Only by physically looking at the iPod's serial number.
Tommytj wrote: i need to find my ipod can anyone help me find a way to track my ipd touch with only a serial number using icloud.
No.
Nobody can help you with that request because iCloud and "Find My iPod touch" do not work that way.
If you cannot see the iPod, you cannot track its serial number. Unless someone sees the serial number, nobody can track it.
Regardless of whether you have properly installed and enabled "Find My iPod touch", iCloud does not track your iPod's serial number. This is true even when you or someone else can see your iPod's serial number.
Regardless of how much you wish iCloud could track your iPod's serial number, it cannot.
"Find My iPod touch" can sometimes track an iPod's location but only under the specific circumstances Limnos has already explained to you.
If "Find My iPod touch" cannot locate your iPod by its location, there is no iCloud way to find it. In that case, the only way to identify your missing iPod is for you or someone else to physically look at it.
Perhaps you will be successful with one of these alternative possibilities for recovering your iPod:
• you can physically search and find your misplaced iPod
• someone may it returned in response to a reward that you offer
• the police may find it after you have reported it stolen
Message was edited by: EZ Jim
Mac OSX 10.7.4

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

HT1918 I have 2 itunes ids. How can I merge the 2 email addresses. The site will not let me merge 2 existing email accounts

I have 2 apple itunes ids. How can I merge the accounts into 1 user account? I have tried using both email accounts on a single itunes account but the site will not let me use 2 existing email accounts.
Thanks

You can't merge Apple IDs.
And you also can't change the name of an iTS Apple ID to another one that ends in a me.com.

How Can We Tune the Joins with "OR" Caluse ?

Hi
We've identified one Query in one of Our PL/SQL Stored Procedure which is taking huge time to fetch the records. I have simulated the problem as shown below. The problem Is, How can i tune the Jions with "OR" Clause. i have tried replacing them with Exists Caluse, But the Performance was not much was expected.
CREATE TABLE TEST
(ID NUMBER VDATE DATE );
BEGIN
FOR i IN 1 .. 100000 LOOP
    INSERT INTO TEST
    VALUES
      (i, TO_DATE(TRUNC(DBMS_RANDOM.VALUE(2452641, 2452641 + 364)), 'J'));
    IF MOD(i, 1000) = 0 THEN
      COMMIT;
    END IF;
END LOOP;
END;
CREATE TABLE RTEST1 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST1
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST ;
CREATE TABLE RTEST2 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST2
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST;
CREATE INDEX RTEST1_IDX2 ON RTEST1(VMONTH)
CREATE INDEX RTEST2_IDX1 ON RTEST2(VMONTH)
ALTER TABLE RTEST1 ADD CONSTRAINT RTEST1_PK PRIMARY KEY (ID)
ALTER TABLE RTEST2 ADD CONSTRAINT RTEST2_PK PRIMARY KEY (ID)
SELECT A.ID, B.VMONTH
FROM RTEST1 A , RTEST2 B
WHERE A.ID = B.ID
AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
BEGIN
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST1');
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX1');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX1');
END; Pls suggest !!!!!!! How can I tune the Joins with "OR" Clause.
Regards
RJ

I don't like it, but you could use a hint:
SQL>r
1 SELECT A.ID, B.VMONTH
2 FROM RTEST1 A , RTEST2 B
3 WHERE A.ID = B.ID
4* AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=94 Card=2 Bytes=28)
   1    0   TABLE ACCESS (BY INDEX ROWID) OF 'RTEST2' (Cost=94 Card=1 Bytes=7)
   2    1     NESTED LOOPS (Cost=94 Card=2 Bytes=28)
   3    2       TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   4    2       BITMAP CONVERSION (TO ROWIDS)
   5    4         BITMAP AND
   6    5           BITMAP CONVERSION (FROM ROWIDS)
   7    6             INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
   8    5           BITMAP OR
   9    8             BITMAP CONVERSION (FROM ROWIDS)
10    9               INDEX (RANGE SCAN) OF 'RTEST2_IDX1' (NON-UNIQUE)
11    8             BITMAP CONVERSION (FROM ROWIDS)
12   11               INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
Statistics
          0 recursive calls
          0 db block gets
     300332 consistent gets
          0 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed
SQL>SELECT /*+ ordered use_hash(b) */ A.ID, B.VMONTH
2    FROM RTEST1 A, RTEST2 B
3   WHERE A.ID = B.ID AND(A.ID = B.VMONTH OR B.ID = A.VMONTH)
4 ;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=175 Card=2 Bytes=28)
   1    0   HASH JOIN (Cost=175 Card=2 Bytes=28)
   2    1     TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   3    1     TABLE ACCESS (FULL) OF 'RTEST2' (Cost=20 Card=100000 Bytes=700000)
Statistics
          9 recursive calls
          0 db block gets
        256 consistent gets
        156 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How can I get the variable with the value from Thread Run method?

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
// I should get Inside the run method::: But I get only Inside
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

We want to access a variable from the run method of a
Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
Even
though I make the variable as public /public static, I
could get the value till the end of the run method
only. After that scope of the variable gets lost
resulting to null value in the called method/class..
I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
public class SampleSynchronisation
public static void main(String[] args)
    SampleSynchronisation app = new SampleSynchronisation();
public SampleSynchronisation()
    MyRunnable runner = new MyRunnable();
    new Thread(runner).start();
    // yield this thread so other thread gets a chance to start
    Thread.yield();
    System.out.println("runner's X = " + runner.getX());
class MyRunnable implements Runnable
    String X = null;
    // this method called from the controlling thread
    public synchronized String getX()
      return X;
    public void run()
      System.out.println("Inside MyRunnable");
      X = "MyRunnable's data";
} // end class MyRunnable
} // end class SampleSynchronisation>
public class SampleSynchronisation
public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run
method "+sathr.x);
// I should get Inside the run method::: But I get
only Inside
class sampleThread extends Thread
public String x="Inside";
public void run()
x+="the run method";
NB: if i write the variable in to a file I am able to
read it from external method. This I dont want to do

How can I get the variable with the value from Thread's run method

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
/* I should get:
Inside the run method
But I get only:
Inside*/
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

HT1349 how can I merge the information with business cards

Similar Messages

Maybe you are looking for