HT1349 I have forgotten the passcode to use my ipad, what should i do?
Hi, We have forgotten the passcode to use the ipad2, what action do i need to take to gain access?
Please check out the following Apple Support article that provides details on how to restore your iOS device if you forget your device's password.
Similar Messages
-
My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?
My IPAD is not disabled but I have forgotten the passcode to get in. How do I get it?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
If i lock my Mac using iCloud "Find My.." with a code, but now i have forgotten the code i used but have my Mac bac. How can i Unlock it????
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
Does any one know how to unlock the touch if you have forgotten the passcode?
Does anyone know how to unlock the i-pod touch if you have forgotten the passcode?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Rob967 wrote:
how do you connect to itunes if u cant remember passcode -
how do I unlock a phone that I have forgotten the passcode to. Annd it will not let me on itunes
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?
If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
-
how do i change the passcode for using my ipad which i created when i set up findmyiphone. this is different from my apple id and password
On both your devices go to Settings>iCloud, then scroll down and click "Delete Account". You can then sign back in using your updated details.
Note: "Delete Account" will not delete data from iCloud, it will simply remove the account from your device. -
i have forgotten the security code on my ipad??I have my apple id can i reset the code
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
HT1349 i have forgotten my passcode to my ipod how do i find it
i have forgotten my passcode to my ipod how di i find it?
You can't. You'll need to connect your iPod to iTunes and restore it. If iTunes asks you for the passcode, place the iPod into recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
i am trying to access my iphone 3gs but i have lost the passcode and it has being disabled can you tell me how i can access it
The following may help: http://support.apple.com/kb/ht1212
-
How do I retrieve a forgotten passcode to my ipad?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My 8 year old daughter has forgotten her passcode for her iPod touch and got it locked in the process of trying to recover. now after resetting its requesting for a iTunes login but i tried both mine and my wives and its not accepting. please someone let me know how to proceed with recovering this.
Hi maveric19,
If you can't recover the passcode, follow the steps in this article.
iOS: Forgot passcode or device disabled
That should get you going again.
Best Regards,
Nubz -
HT201304 What to do if i have forgotten the passcode?
Is anyone can tell me what to do so that I could open the "Restriction" programme.
Apps are not part of the backup. In app data is, but not the apps themselves. They should be in your iTunes library, or you can re-download them from the app store using the same ID used to purchase them originally.
If you restore the backup, you will restore the restrictions settings, putting you right back where you started. -
I can't remember the passcode for my iPod touch, what should I do?
I lost my access code of my IpodTouch, what should I do
If you meand the screen-lock passcode,
Connect the iPod to the computer and restore via iTunes. If necessary, place the iPod in Recovery Mode to allow the restore. -
I have completed downloading software to enable my iPad, what should I do next?
I have completed software download to enable my Ipad that was disabled. The system notified me that it is processing it; Thereafter, nothing happens, what should I do next in order to enable my iPad?
Please check out the following Apple Support article that provides details on how to restore your iOS device if you forget your device's password.
Maybe you are looking for
-
Cannot choose printer when printing HTML report
Hello, I have lost many many hours trying to print correctly a report that is composed only of a JPEG image. After a conversation in the forum, I concluded that the LabVIEW has a bug printing Standard Reports, as it cannot manipulate correctly the ma
-
How can I prevent the S5's screen from coming on when charging completes?
I got my S5 today and it seems to have a "feature" that will be very damaging to the OLED display. When it's done charging, the screen comes on and stays on. I've been going through all the settings I can find and don't see anything that will preve
-
Installing SQL Server 2008 R2 on a Dell Desktop with MS Server 2008
Due to some new software (Multiverse) our business server with MS server 2003 is going to be migrated to MS Server 2008. This migration went well but now comes the problem: I bought MS SQL Sever 2008 R2 also required for the new software and tried to
-
I want to create a medium SharePoint Farm
Hi All, I want to create a medium SharePoint Farm, i am having below three servers 1)Web Server 2)Application Server 3)Data Base Server Now, what i have to install on Web server, application server and data base server. How to make a relation between
-
Need help with select that month range with flexible first date
Hello everyone, I am trying to create a selection of month range (will be in a WITH clause) for a report to display monthly data. But the first month start date can be any date. (Not necessarily the first date of the month) Examples: Report input par