HT1349 I was updating to iOS 6 when my iphone froze up. apple is blinking but nothing is happening. any suggestions?
Any suggestions??? Phone locked up while updating to iSO 6. Apple is blinking but no update status bar
I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.
Similar Messages
-
I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?
Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac -
I am trying to open iBook on my iPhone 5s with iOS 8.2, when it opens I have a white screen for a few minutes, then iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?
do a reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?
If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
When I try to download apps, I am asked to answer security questions. However, when I cklick "continue", I am required to type in my Apple ID password but nothing else happens. Bottomline, I am not able to download apps at the time which is annoying.
Try downloading something from the iTunes Store on the iPad and see if that solve the password problem.
-
I was updating my IOS in iTunes. It was taking over 2 hours and when I came back, there was a symbol on the iPad showing a USB plug pointing to an iTunes icon. When I unplug the iPad from my PC, it goes blank and won't respond.
The restore is not completed. You will have to re-try the restore process again.
Try using this link to re-iniiate the restore.
http://support.apple.com/kb/HT4097 -
When I touch my apps the screen blinks but nothing happens what can I do?
when i touch an app to start it, the screen blinks but nothing happens. I did refresh that didn't help. What next?
- Try resetting the iPod. Nothing will be lost..
- downoad/install a new app.
- iOS: Troubleshooting applications purchased from the App Store -
My Apple TV suddenly stopped working. When I hit a button on the remote the light on the apple tv flickers but nothing else happens. Anyone know how I can fix this?
I had the same problem; Apple TV was working proper then for no reason I got the continuous blinking front LED. The Apple TV has no sound or video output at all. I tried reseting the Apple TV via my Apple remote controller but that didn't do anything for me. I finally called Apple and they told me that the way to fix my box is to reset the Apple TV to factory default. So I had to attach the Apple TV to one of my Apple computers and launch iTunes. Once iTunes was running it recognized my Apple TV and I clicked on the option to restore to factory default. After the restore my Apple TV now works properly. My final action on the Apple TV was to sign into my account and enter my password.
-
My iPhone 3gs locked when I was updating to iOS 6.0.1.
My iPhone 3gs locked when I was updating to iOS 6.0.1.
I begun updating by the iPhone itself, then it asked to connect to iTunes, but at the end - after tried to restore the firmware it does not restore (id error 29). I've just replaced the battery, there is something linked with this?
Why do I unlocked my iPhone?
Thanks,
MiguelSee if this helps:
http://support.apple.com/kb/TS3694#error29
How did you replace the battery? Did you take the back off
and replace it yourself? -
HT4623 why is it that when i was updating my IOS,my device collapsed and i cannot oen it
why is it that when i was updating my IOS,my device collapsed?
Juliet Pelaez wrote:
... ,my device collapsed?
What do you mean... -
I was trying to update to ios 7 when itunes show me a error 1 and my iphone is in recovery mode
i was trying to update to ios 7 when itunes show me a error 1 and my iphone is in recovery mode
Hi, francescakathleen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Resolve iOS update and restore errors in iTunes
http://support.apple.com/en-us/HT201210
Cheers,
Jason H. -
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
After updating to iOS 8, when I hit the home button once it takes me to the "app switcher."
Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.
-
I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it. How do I fix this?
If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades. -
My App Store is locked at an app I purchased and won't let me make any selections. What do I do. I just got my iPad back from factory for new battery. It was updated to iOS 7.02 at factory. Have not been able to take a movie either. Will take picture. No idea what square is, but won't let me select it either.
Try close all apps in multi-task window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
Maybe you are looking for
-
Hello, I use mail, my version is (uname -a) Darwin Igors-MacBook-Pro.local 11.4.2 Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 x86_64 and I want to define my message font to particular font, f.e. ari
-
Hi Gurus we need a new SAP Report Writer report similar to the current a current report say ZCST . The new report needs to have all of the information that the current ZCST report has but with Prior Year Actual and a Variance of Current to Prior Year
-
Problem seeing the flv player control
Hope someone can help me on this. 1. encoded a video with Flash 8 2. selected SteelExternalPlaySeekMute as skin for player 3. resized the canvas to be about 10% larger than the actual video+player 4. centered the video+player 5. generated the swf, pl
-
Twitter still will not load. Please I need help
I did the hard shut of and twitter still will not load, I need help please
-
6-input channels on Audigy 2 Platinnum
Does anyone to know, if I could to record from 6 independent channels to 6 tracks in realtime, for example in Cakewalk or Cubase SX(multitrack audio-studio software)? I'm thinking about buy it for that purpose. Thanks for information.