HT1349 ipad displays disabled and connect to itunes. how do I go about this?
My Ipad displays disabled and connect to itunes. How do I go about this? I have already did the home/power but still not working..Please help
The iPad is telling you what to do. Connect the iPad to your computer and launch iTunes. You probably need to restore the device. If it was disabled because you forgot the pass code, you will have to restore using recovery mode. As long as you restore with the computer that you always sync with, you will be able to restore from your backup at the very end and you will not lose any data.
This explains how to restore the iPad.
http://support.apple.com/kb/HT1414
This explains recovery mode.
http://support.apple.com/kb/ht4097
This explains the disabled message if you forgot the passcode.
http://support.apple.com/kb/HT1212
Similar Messages
-
When I turn my Ipad3 on I get a message that states IPad is disabled.. connect to ITunes. I have done this and nothing happens. What else might I try?
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
hi, i have to reset an ipad from work which belonged to another employee. It says on the screen that it is disabled and connect to itunes but when i try to connect it says error i need the passcode, can anyone help?
You have to use recovery mode which will totally erase the iPad. Read here.
iPad: Unable to update or restore - Support - Apple -
Mini ipad is disabled and I downloaded Itunes but the exe file will not run
mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore. How long will it take for my phone to restore? Is it gonna be 24 hours?
It appears like there is maintenance or something affecting the iTunes server today. I recommend giving it a few hours and trying again. It shouldn't take that long to restore but from what I hear, there is definitely something going on with the iTunes server today.
-
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg -
My ipad is disabled and it tells me to connect to itunes. However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled. I am ready to throw this iPad out the window. Wll never buy another one.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Ipod touch says it is disabled and connect to iTunes
My daughters Ipod Touch was dead and needed recharged. We recharged and when we turned it on it says Ipod disabled must connect to iTunes. We did this and nothing happened.
THe Ipod Touch is locked up on that screen.
Help..........DirkRestore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
TS2734 iphone 4s, iphone disabled connect to itunes how can i do solve this problem?
iphone 4s passcode blocked & say iphone disabled connect to itunes how can i enable this passcode unlocked ?
https://discussions.apple.com/message/18310137#18310137
Do what is suggested in this thread and restore -
"iPad is disabled, please connect to iTunes" ???????????
Hi, issue quoted above, how can I fix this? I have been using it for revision, so it needs to be fixed urgently.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT1386 home button dont work and it say ipod is disable and connect to itunes?
I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
IPad is disabled, cannot connect to itunes to reset passcode,Stuck!
My son attempted to unlock my iPad without success. The iPad is now locked and screen shows iPad is disabled, connect to iTunes. When I connect to iTunes the alert box pops up and says to unlock the iPad before iTunes can connect to it! I am stuck! Please help?!
You need to use recovery mode now.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
my iphone says its disabled and to connect to itunes but when i do it says the passcode needs to be typed in and i cant type it because my phone is disabled
Type "unable to restore" into the search bar at the top of this page and read the resulting help article.
-
it wont let me do anything but just let me look at the screen and it saying ipod disabled connect to itunes
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My apple Ipad is disabled. I tried to get itunes, but Itunes says I have a blocked password. I don't know how I can get my password in. I know it.I can't type it in anywhere.
Connecting in recovery mode will help: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
How to stop the pdf reading record?
How to stop the pdf reading record? I don't want my track record to be leave on the computer.
-
Oracle SQL Developer vs Navicat Oracle vs Toad
I've been using MySQL and planning to migrate it to Oracle, but, I'm looking for an admin tool for Oracle and heard that Navicat for MySQL is now available for Oracle. It can create, edit databases, import/ export data,etc, so many features, I tried
-
Authorization check failed Auth. Obj. M_MSEG_LGO Goods Movements
Hello security team. We are using two roles for one authorization object to be checked in the MIRO transaction. One role (1) checks the S_TCODE and the authorization object M_MSEG_LGO for ACTVT and BWART fields. The other role (2) checks for the sa
-
Reduce opacity of gridlines in lens correction
Is it just me or are the gridlines whiter in the manual lens corrrection? Can you make them feinter in any way?
-
Can I have Aperture 2 and 3 installed on the same computer?
I have been using Aperture 2 now for some time and have various libraries with 1000's of images. I want to buy a full Aperture 3 copy from the App store to use for all new photos and leave the old libraries and Aperture 2 as is. Will this be a proble