HT1349 iv a new laptop with itunes 11.0.2 and windows 8.when i burn to cd i get error 4310

i just got a new laptop and i put the new itunes 11.0.2 on and now when i go to burn cd,it say unknown error 4310 and im running on window 8. i seen this asked on the net so it is a problem, but iv seen no answer to repair it.surly there is an answer. please can someone reply

This is the iPad forum.   For questions about iPad.  since this is an iTunes issue I suggest posting in the iTunes for Windows forum here:
https://discussions.apple.com/community/itunes/itunes_for_windows
The Mods will probably be moving the post there though.

Similar Messages

  • Problems with Itunes 10.5.1 and Windows 7

    Sirs,
    yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits.
    When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
    I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
    Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
    Attach is a part of application event log.
    Best regards,
    Carlos G

    I forgot, the operating System is Windows 7 Profesional 32 bits.
    Error    12/10/2011 8:24:17 AM    SideBySide    33    None
    Log Name:      Application
    Source:        SideBySide
    Date:          12/10/2011 8:24:22 AM
    Event ID:      33
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:     
    Description:
    Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SideBySide" />
        <EventID Qualifiers="49409">33</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-12-10T13:24:22.000000000Z" />
        <EventRecordID>5171</EventRecordID>
        <Channel>Application</Channel>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1 e18e3b",type="win32",version="8.0.50727.6195"</Data>
    Error    12/10/2011 8:29:12 AM    MsiInstaller    11935    None
    Product: Apple Application Support -- Error 1935. An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT,type="win32-policy",version="8.0.50727.6195",pub licKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}
    Error    12/10/2011 8:24:22 AM    MsiInstaller    11920    None
    Product: Apple Mobile Device Support -- Error 1920. Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services
    Error    12/10/2011 8:24:22 AM    SideBySide    33    None
    Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
    carlosfromcucuta wrote:
    Sirs,
    yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits Profesional.
    When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
    I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
    Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
    Attach is a part of application event log.
    Best regards,
    Carlos G

  • HT201269 I have had my laptop stolen with my itunes account on it with all my music/ films/ apps etc. Can I reverse back up my new laptop with itunes installed from my multiple apple devces?

    I have had my laptop stolen with my itunes account on it with all of my music/ films/ apps etc. Can I reverse back up my new laptop loaded with itunes installed from my ipad and iphone apple devices?

    Follow the directions here:
    https://discussions.apple.com/docs/DOC-3141

  • How to update a new laptop with iTunes from iPad 2?

    I have recently bought a new laptop and when I've opened iTunes on it, hardly any of my music etc is on it. How do I sync all my devices?
    I have seen the iTunes match but do not want to purchase that. Is there a way for all my devices to be synced and to automatically update after each new purchase?
    Thanks in advance.

    Hello 2012Nano
    For any purchases that are made through the iTunes Store, you can setup Automatic downloads for most purchases to be downloaded to either your computer or iOS device. Check out the article below for more information on how to set that up.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • HT201269 how can I upload songs from my iPod shuffle to a new laptop with iTunes?

    Previous desktop crashed & replaced with a new laptop, so unable to backup my iPod shuffle to iTunes.  When I try to sync the iPod to the new iTunes library, it wants to erase the iPod completely and load the songs from the iTunes library on the new laptop.  How can I transfer songs from iPod shuffl into the new iTunes library without losing everything?

    The sync is one way - computer to ipod.  The exception is itunes purchases - File>Devices>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  Use your backup copy to put everything back

  • New iPad with iTunes 10.3.1 and Snow Leopard?

    Just got a new iPad (iPad "3") and want to transfer a bunch of photos from my MacBook Pro running Snow Leopard 10.6.8 and iTunes 10.3.1--
    CAN I DO THIS using the cable connector (not WiFi)?  I do this every day with my iPod Touch (Gen 1, Dec 2007 running iOS 3.1.3).  I will be moving to Mac OS Lion (10.7.3) soon - but not immediately.
    Thanks for any feedback here.
    Best regards,
    Steve Schulte
    Friday 23 March 2012

    The new iPad needs iTunes 10.6+ (from here). You could use a third-party app such as Simple Transfer which can copy photos over via your wifi network, but they will only go into the Camera Roll album - though you can then 'copy' them into new albums.

  • How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?

    After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC.  So I am again able to import music from CDs, play music on my PC with iTunes, and burn CDs as I could do with previous iTunes versions.  Then, however, I purchased some new music and tried to sync iTunes with my iPod Classic for the first time since the update to 11.1.4.  So far, I have been spectacularly unsuccessful.  Can anyone help me?
    With previous iTunes versions, sync was automatic when I connected iPod to a USB port.  Now when I connect iPod Classic to PC's USB port (I've tried two different ports), iPod’s screen says “Connecting” but iTunes doesn’t open.  And while iPod is connected to the USB port, I can't open iTunes by right-clicking its icon and selecting “Open.”   (ITunes, however, always opens OK if iPod is NOT connected).  With the iPod connected to a PC's USB port, I opened Windows 7 “Devices and Printers.”  Devices shown included both (a) the “Apple iPod USB Device” and (b) “Apple Mobile Device USB Driver.”  I right-clicked each of these device icons in turn and selected “troubleshoot.”  Both times, the report was “Troubleshooting couldn’t identify the problem.” 
    I am also unable to properly “eject” the iPod.  I tried ejecting (a) from the Windows taskbar's Notification Area, (b) from Windows “Devices and Printers” and (c) by right clicking the iTunes icon and selecting “Eject.”  Nothing worked, so I reluctantly pulled the cable out of the iPod without ejecting.  That causes a yellow triangle with an exclamation point to appear in “Devices and Printers” for my PC—which disappears after shutting down and rebooting the PC. 
    If I start iTunes and THEN connect the iPod Classic to the USB port, iTunes does nothing and almost instantly freezes (shows as “not responding” in Windows Task Manager and I have to close it via Task Manager). 
    Suggestions, please, on what I need to do?  My iPod Classic continues to work just fine, but I can't put any of my newly purchased music on it and I guess it will become an expensive paperweight if the battery happens to run down.  If nothing else, is there an old version of iTunes I can download somewhere that likely will work with the iPod Classic and my PC setup? Thanks so much!

    Hi turingtest2,
    Thanks so much for your response--yes, I've seen the TS1363 document.
    I was able to open iTunes, start the iPod Diagnostic Device Connectivity Test, and connect the iPod when prompted to do so.  The only problem reported by the diagnostic program was "No iPod, iPhone or iPad found." So it does seem as if the TS1363 document should apply.  But I have tried connecting the iPod after executing each of Steps 1, 2, 3, 5, 6, and 9 shown there and nothing has worked so far.  Details follow:
    --Went through the iPod Classic troubleshooting assistant--except I did not "reset" the iPod (because having all my "old" music available on the iPod has value to me).
    --Restarted iPod Service.
    --Restarted Apple Mobile Device Service.
    --Verified that the Apple Mobile Device USB Driver is installed.  There is no down arrow or question mark or other indication of problem with it.
    --Tried two different USB ports (I assume that is what is meant by "change your iPod's drive letter"?).
    --Temporarily disabled Norton Antivirus.
    For some reason, there are 368 files and 60 folders in the Temp folder under my user name, and it looks like at least some are "read-only."  Windows wouldn't let me delete or move the folder, even after I turned off Norton AntiVirus and closed the programs in the "Notification Area" that I could figure out how to close.
    I'm very reluctant to get into messing with Config files or registry keys.  And I have already tried uninstalling/reinstalling iTunes 11.4.1 so many times.  I'm not sure what to do but am considering uninstalling all of the Apple products (again) and try installing an older version of iTunes.  Or maybe I should try to install iTunes 11.4.1 on our Windows 8 laptop and see if the iPod will connect to that (although I really need to be able to sync to my desktop PC).  Probably won't have time to do either for a few days--too many other things to do.  But please let me know if there's something more that's relatively simple and low-risk I could try.  Thanks again!

  • Issues with iTunes 11.1.5 and Windows 8.1

            I recently upgraded my iTunes to 11.1.5 on my Windows 8.1 computer, since the upgrade iTunes has become unusable. Before the upgrade I had an occasional error, device not recognized or a download error, sometimes i had to unplug and then plug back in in my devices in order for iTunes to recognize them. I have an iPhone 4s, IPad 2, and iPod Touch all are affected by the change in iTunes.
             After the upgrade none of the devices when plugged into the computer will be recognized by iTunes, even after multiple attempts I get an error that states there was a device error.  iTunes will also not download any updates from the store, nor will it download any music or movies I have purchased. I have received the following errors so far with the iTunes upgrade.
    0xE800065- could not connect the device, error 8008 – unable to download update, iTunes (or other apple program) has invalid signature and will not be downloaded.
           If I am able to get the device recognized in iTunes it will appear but only a yellow bar will be visible across the bottom of the screen and it will not sync or  allow me to change anything with the device. Action taken so far..
    I have uninstalled and reinstalled iTunes TWICE, using the order and instructions provided to me by Apple support, I had to DL the file itself at a neighbor’s house since  it won’t DL here. I have tried to do the name and rename trick and this doesn’t work either, also tracking the device down in my device manager and uninstalling and reinstalling the drivers has done nothing. I have now run out the options provided to me here so far… anyone official or otherwise have anyway to get me working again??
    TY

    it works at first then after trying to update a few apps (the third one this time) iTunes again stops working and gives me the 8008 error.
    Okay ... let's try seeing if that one is the root cause of the errors.
    Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting
    Does that calm down the 8008s?

  • Does anybody have a current status on all the bugs with iTunes 10.5.2 and Windows 7?

    I guess that fact that iTunes isn't even available as a drop down kind of answers my question!

    Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
    Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
    I'll ping some folks about the error you are getting. . .
    hth,
    Ben

  • Using new shufflw with itunes 6

    Can I use a brand new shuffle with itunes 6? I hate 7 but when I connect the shuffle it says it needs the itunes update to 7? Can I format the new shuffle for itunes 6? Thanks!

    New iPods need iTunes 7.0.2 minimum, to funcion properly.

  • Why didn't plug-ins sync (to this new laptop) with everything else?

    Why didn't plug-ins sync (to this new laptop) with everything else?

    Extensions and Plug-in synchronization is something that hasn't been implemented yet but is in the roadmap for the upcoming month.

  • I have this error -42032 with Itunes on my Computer OS windows 7

    I have this error -42032 with Itunes on my Computer OS windows 7
    when i start Itunes

    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes

  • I have just bought a new laptop with windows 8 and when trying to load itunes was told it was incompatible. Can anyone tell me what I can do to put itunes on my computer? thank you

    I have just bought a new laptop with Windows 8 and cannot load itunes from the existing disc or online as it is incompatible.Can anyone tell me what I can do now to get itunes on to my computer? Thank you

    See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
    tt2

  • I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod.    My computer died and i am buying a new one (mac is out of budget)    When I get my new computer, obviously I will download Itunes. My Ipod s

    I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod.
    My computer died and i am buying a new one (mac is out of budget)
    When I get my new computer, obviously I will download Itunes. My Ipod still has all the music on it and the external hard drive is ok.
    I don't want to "erase" or lose any information when I sync with a new itunes that is "empty"
    What are the steps? After I download Itunes and set the folder location to my external harddrive what is next? Will Itunes recognize my IPOD? Will it load the music/list from my ipd or external into itunes?
    Thanks in advance

    The following user tip is worth checking through:
    Recovering your iTunes library from your iPod or iOS device

  • My computer was stolen a few months ago i now have a new laptop with new id but don't know how to retrieve my itunes account for i forgot my old id. How can i get to my account?

    My computer was stolen several months ago and I now have a new laptop with a new id but I do not know how to retrieve my itunes account for i have forgotten my password and user id. I need a way to get into my old account.

    http://iforgot.apple.com
    Regards.

Maybe you are looking for

  • Is there a way to open a duplicate library window in Aperture?

    Since photostream does not include metadata such as captions in its photos, I thought that perhaps I could copy and paste this information into the comments of each picture. However, that's a tedious process to go back and forth between the event and

  • Custom page with internal id as parameters: convert to names

    Hi, I am new to OAFramework... just so that you know. I have a custom page, called from a link on a notiification, which has a number of parameers coming in. These parameters are internal ids. Do I use validation view object to translate those id's i

  • Extending the same form twice

    Hello everyone We are in the process of moving from paper foem for IT computer and access resources.  I have two completely different forms with many fields requesting user input 1) one for System access - eg new domain, email, share permission etc 2

  • Overwriting in batch processing

    Switching from Audition 3 to CS6 has been problematic for me, in the Batch Conversion department. In Audition 3, I could open many hundreds of WAV files, convert them in mp3, and the processor would then erase the old WAV versions. Now, in CS6, I che

  • Connect abap trial with ce 7.2 trial

    Hi expert. I have a problem I have two machines, one with win 2003 server and stack abap trial, other with win2003 server and CE 7.2 trial. Both of them works well. How do I connect CE 7.2 with abap instance ?, for implementing RFC an web services ab