HT1349 My iPhone doesn't want to work with bose speaker??

I try cleaning my Bose speaker as well as my phone... Still won't work???

I'm pretty sure that all Bose speakers will work with the iPhone, unless they are very old and still have Firewire charging ports. Check the model number with Bose to be sure; they are a very supportive company.

Similar Messages

  • HT1222 My Iphone doesn't want to sync with itunes.

    My iphone doesn't want to sync with itunes. What is going on here?

    If you have not already, shut down your computer.  Do this to reset your iPod
    http://support.apple.com/kb/HT1320
    Start up your computer.  Run iTunes.  Connect iPod.  Try to sync again.

  • Samsung SyncMaster P2770HD doesn't want to work with new MacBook Air

    I have a (pre-unibody) MacBook Pro and a Samsung SyncMaster P2770HD. I just picked up a MacBook Air with a MiniDisplay Port to DVI adapter. The monitor works fine with my older Pro but when I connect using the adapter to my Air, the monitor doesn't work. The monitor momentarily lights up and complains that it's not receiving a signal.
    Any ideas?
    Thanks in advance!
    Dan

    Hello there - did you end up ever solving this one?
    I have a 13" MacBook Air (2011), using a mini display port to HDMI with a P2770HD, and I just cannot get the air to detect the display, or vice versa.

  • IPhone doesn't want to start with apple logo keeps blinking

    Hi all!
    I was using my iPhone, with its battery more than 70%, but suddently it tuned off by itself. I tried restarting though on/off button and home button, but it didn't start. I tried recharging and it didn't work as well. When I tried to connect to iTunes, the phone was not detected as usual. Then, the screen only showed the apple logo blinking every 3 seconds. I also tried updating my itunes, yet it still had no effect. Any other advice how to solve this problem? Thanks.

    Disable any firewall or security software and restart the computer.
    Also make sure your up to date on iTunes software go to your start menu > all programs > Apple software update
    or on mac go to  and choose software update and make sure your on iTunes 11.0.4 then restart the computer and retry the recovery mode restore.

  • Help, itunes doesn't want to work with airtunes and my airport express!

    Strangely specific problem with playing itunes using airtunes. Just connected an Airport express to my time capsule. All the software and firmware is up to date, and I'm streaming from itunes to an airport express connected to a stereo. My itunes is on a laptop. My library is on the time capsule. Almost everytime the song changes, the audio drops out and stays out until I pause and replay the song. It's the weirdest thing. There are no random audio drops, just a failure to keep playing when the song switches (and it doesn't happen every time, just some of the time). This is similar but not the same as the problems other folks are having with airport express and itunes audio drop outs. Does anyone have a solution?
    rabbit

    Problem solved. Upgrading to most recent itunes relased yesterday seems to have fixed the problem.

  • Video cable doesn't want to work with dock

    I bought a video cable to connect my Touch 2G to my tv. I originally bought a component cable, but it wouldn't pass a signal through my switchbox. My tv has only 1 component input and it would be a major P.i.t.A. to swap cables back and forth, so I took it back and bought a composite cable. I hooked it directly to my tv and it works great. Then I bought a universal dock and hooked it up to the video cable, but now it won't play on my tv.
    Anybody have any suggestions?

    Here is some more information. My dock model is a1256 or MB125G/B depending on whether I'm looking at the unit or the box. When I'm hooked up directly to the cable for music, the volume slider is gone and I can control the volume through my stereo receiver. When I hook the dock to my a/v cable and I dock my ipod, the volume slider is present when I play music, as if it was hooked up to headphones or usb. So I'm certain that the ipod is not passing the same amount of data through the dock to the a/v cable. I suspect this may be a problem with the dock, but can't find an answer anywhere.
    Any help is appreciated

  • Firefox 4 doesn't want to work with my Alienware m17x.

    i down loaded firefox 4 and everytime I move the curser firefox turns black. the older version worked great. new version not so great.

    If you have the HP 2605dn printer attached to the 802.11n AirPort Extreme Base Station (AEBSn) (or any router) by Ethernet, then the AEBSn is NOT performing as a Print Server. Instead, the printer itself would have to be configured to provide this service.
    I don't have this particular printer, but I do have a network-ready HP Officejet model that I have my network clients (Macs, PCs, & even Linux) connect to. The key is either using the unit's interfact panel to configure the appropriate network settings specific for your network.

  • My Iphone doesn't want to open because its disabled, what can I do to open it?

    My Iphone doesn't want to work because its disabled by making the passowrd wrong to many times. It tells me to connect it to Itunes. I did I connected it to Itunes but it tells me that please respond on your Iphone. I can't open my Iphone so I can't respond. Any Ideas on how I might open it?

    http://support.apple.com/kb/ht1212

  • Lightening wire with Bose speaker stopped working

    Lightening wire stopped working with Bose speaker ... bought another one and this one is not working either - i don't recall changing any phone settings to make it stop working - any ideas? Have also tried it on other speaker devices at home, so I think its the phone. I have however connected the phone to my car using the same port and it works fine so I think the port is ok ... so I am back to thinking its the settings but can't figure out which ones.

    To connect an iPhone 5 to a Bose SoundDock ( not the Original SoundDock )
    You need an adapter which plugs into the Bose 30 pin plug and has a lightning plug at other end
    There are two types
    http://store.apple.com/uk/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
    or this
    http://store.apple.com/uk/product/MD824ZM/A/lightning-to-30-pin-adapter-02m?fnod e=45
    Make sure they are genuine Apple adapters they work perfectly ,most "eBay" style rip-offs do not
    This overcomes the issue of having any dock with the old 30 pin plug and a lightning device 

  • HT4623 i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

    i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

    Google "iPhone DFU Mode". Put the phone in DFU mode and restore it.

  • I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

    I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

    What OS do you have? Have you tried the latest drivers?
    http://tascam.com/product/us-122l/downloads/
    alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

  • ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

    iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

    I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
    Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
    I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

  • CS3 doesn't want to work any more

    Hello,
    I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
    What can I do ? Help !
    Thanks.

    Thanks a lot. That worked for me too. I was afraid that CS3 had changed into
    a pumpkin this morning.
    virginie
    Le 22/11/13 13:25, « De Mostertman » <[email protected]> a écrit :
    Re: CS3 doesn't want to work any more
    created by De Mostertman <http://forums.adobe.com/people/De+Mostertman>  in
    Photoshop General Discussion - View the full discussion
    <http://forums.adobe.com/message/5865197#5865197>
    I had my CS3 freezing this morning on startup. I hope you didn't reinstall or
    anything bacause the sollution is quite simple: What helped me was restarting
    Photoshop with the internet cable pulled out. Apperently it was freezing on
    the registerscreen, and by removing the internet cable I surpassed that
    screen, to see another screen.after that i could start it up again with the
    internet cable plugged in again.
    Please note that the Adobe Forums do not accept email attachments. If you want
    to embed a screen image in your message please visit the thread in the forum
    to embed the image at http://forums.adobe.com/message/5865197#5865197 Replies
    to this message go to everyone subscribed to this thread, not directly to the
    person who posted the message. To post a reply, either reply to this email or
    visit the message page: http://forums.adobe.com/message/5865197#5865197 To
    unsubscribe from this thread, please visit the message page at
    http://forums.adobe.com/message/5865197#5865197. In the Actions box on the
    right, click the Stop Email Notifications link.  Start a new discussion in
    Photoshop General Discussion at Adobe Community
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
    pe=14&container=4694>  For more information about maintaining your forum email
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

    Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

    Hi thenicegirl07,
    It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
    iPod displays a sad iPod icon
    http://support.apple.com/kb/ts1373
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
    Go to http://www.apple.com/retail/storelist/.
    Choose an Apple Store location.
    Click the Reserve link under Genius Bar.
    Choose iPod.
    Select your desired reservation date and time.
    For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
    Additional Information
    iPod displays a folder icon with an exclamation point
    -Jason

  • My iPad air charger doesn't want to work

    After less than 7 months from buying my iPad air, my charger doesn't want to work, my iPad is not chargin. Do I need to buy a new one?

    No, you need to get the charger replaced under warranty.

Maybe you are looking for

  • Can I use Windows MFC to develop user interface for Adobe photoshop plug-in?

    Hi I need to have some of the controls like image list ( displaying thumbnail preview) and tree controls. I think it is difficult achieve the same using the ADM controls. I was wondering whether I am able to add winodws MFC class and launch the windo

  • XI 3.0  Sender Agreement error during Configuration Wizard

    Hi During the Sender Agreement generation of the Configuration Wizard an error occurs because it takes the value of "" for Receiver Party and Service.  This was discuused during the XI252 Session at the San Diego SAP TechEd.  The proposed solution wa

  • Problem setting up selection rule in ACS Express 5.0

    Hello, When creating a Radius access service and then clicking on selection rules and trying to add a device group I get this error: An error has ocurred.  please see below: 1. entry has been modified or deleted by another session.  click on cancel o

  • Photosmart C5180 All-in-one not rpinting magenta

    Since a few months, all colour prints don' t contain magenta. I replaced all cartridges, run cleaning heads, align etc..., the problem is still there. Cyan actually seem to replace the magenta jets (blue dominating, gets only green and blue). Any hin

  • Cannot Start Execution from Work repository of ODI

    I'm unable to start any execution with ODI agent from my work repository, getting the following error, "oracle.odi.runtime.agent.invocation.InvocationException: ODI-1274: Agent Exception Caused by: Create DwgConnectConnection to work repository faile