HT1349 My ipod was on charge and the wire sparked eversince it wont turn on any help?

my ipod touch was on charge and the wire spaked eversince it wont turn on? any help

Hi Ajburmy,
You should contact Apple, either by calling the appropriate phone number on this page or by carrying in the iPod and charger to an Apple retail store. As this is at least potentially a safety issue (because of the sparking) I am certain that they will at least want to hear about it.
Whatever you do, don't use the iPod or charger until Apple has said it is okay.
Best of luck.

Similar Messages

  • My iPod had full charge and suddenly cut out, now it wont turn on, iTunes wont connect either, any advice?

    Hey everyone, right, i was recently using my iPod touch 4th gen (which had been on charge for about 5 hours), i took a quick 2 minute break and got back to find the screen blank, now the iPod wont turn on. I have tried connecting it to iTunes but it doesnt even connect. I havent got any jailbreaking software on there although i havent updated the software in a while. Any advice?

    - See if resetting the iPod will eithr bring it to life or asllow itunes to see the iPod so you can restore the iPod via iTunes
    - Next see if placing the iPod in recovery mode will allow it to be restored.. For recovry mode see:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appontment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • My iPod touch 4G charger broke (the wire inside cut).

    My iPod touch 4G charger broke (the wire inside cut).  It falls under the 1 year warranty. Should I call Apple and get a new charger? How much will it cost? Note: my iPod is already dead

    Unless the damage was cause by abuse or accidental damage App will replace an Apple charger at no cost. The warranty only covers defects in the device.

  • So i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

    so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

    It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.

  • My ipod was on charge and i turned my pc off and now my ipod will not come on

    my ipod was on charge on my pc and i turned the pc off, and now my ipod will not come back on.

    Hi,
    Plug it into your computer and, after a while, try resetting it:  http://support.apple.com/kb/HT1430. 
    Hope this helps! 
    ---likeabird---

  • I can't drag to reorder bullets in a build. The different bullets don't move and the "order" menu can't be activated. Any help?

    When I open the Animate bar, and select Delivery by Bullet, then Build Order, it's impossible to change the order in which the bullets appear (it's much easier in Powerpoint). eg. in a series of bullets 1 / 2 / 3 / 4 I may want to display 1 and 3 (as questions) and then only show the answers 2 and 4 after, but still have them show in numerical order. I can't do this with Keyword. 
    How can this be resolved?

    fizzogg wrote:
    Can I just add that I was always able to do this with the previous version of Keynote (before Mavericks and the upgrade).
    If you havnt deleted it, continue to use verion 5, its still in the applications folder, iWork 09.

  • My ipod ouch 4th gen wont turn on o charge and the home button doesn't work could someone please help me

    my ipod's home button wont work anymore and just last night my ipod shut off and wont yurn back on can someone tell me what to do please thank you

    Try:
    - iOS: Not responding or does not turn on
    Where it says place the iPod in rcovery mode use this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciate​d.

    I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

    The screw terminals are made by Phoenix:
    The 14 screw terminal row is P/N 18-69-33-4
    The 12 screw terminal row is P/N 18-69-31-8

  • I am unable to restore from iCloud backup because the new phone has iOS 8.1.2 and the old phone has iOS 8.2? Any help.

    I Have just bought an iPhone 6 and want to restore my iPhone 4s via iCloud backup to the new iPhone 6. The setup of the iPhone 6 halted because according to the new phone it has iOS 8.1.2 whereas the backups were stored using iOS 8.2 following my updating of the iPhone 4S recently. How do I jump through this hoop? How do I update the new phone to iOS 8.2 without serring it up first? Anyone, please help?

    Update the new phone to the same version that has been used to create the backup. In your case, the new device has to run 8.2 to be able to use the backup made with the other device.
    Setting it back to factory settings will install the newest version and after that you can use the backup made under 8.2
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Ipod Video 30g wont turn on, any help why please?

    So I have found this old ipod video I must have got when it first came out. It has been a while since it has been used, and it may be heavily damaged, I am not sure. But when I press any button it remains on the Apple loading screen, as in the dark background with a dimly lit apple logo. This ipod is way past any warranty, and I am trying to do a self repair to save some money. I already tried charging it no luck. I connected it to the computer and my computer never recognized it, I reset it (menu and select) no luck, put it in disc mode (pause/play and select) no luck. But the screen stays on at the Apple logo. Can anybody tell me how I can fix this problem or what is the cause of it. Thank you very much.
    PS I am from Chicago so if anyone knows of any places that can help me for cheap let me know.

    actually i tryed doing the thing where u hold put the usb cord into the ipod while holding the home button and i tryed to restore it and it came up with in error that said that its not eligible for the requested build. i dont have the newest version of itunes on my mac and i heard u need the newest version to get the newest software for the ipod touch and it said restore and UPDATE in the beginning so maybe thats the problem? idk plzzz someone help me!!
    my last post has already been resolved so dont bother with that.

  • Ipod mini ac charger and ipod nano

    Nice and easy but i could not find the same exact question elsewhere.
    I have an ipod mini that has battery problems, i have just received a new nano and noticed that it does not have an AC charger. Now, the question is, will my ipod mini ac charger and the firewire cable charge my new nano or do i have to go and spend 20 quid on another ac charger, and i'll be mighty hacked off if i do.

    Cheers mate. Yeah i figured on the usb sync thing just wanted to make sure i wasnt gonna blow up my nano with the Mini ac charger.
    Thanks again,
    Ian.

  • I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any ideas?

    I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any help appreciated. Very frustrating!

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • I hav a ipod touch 4th gen with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was

    i bought a ipod touch 4th generation with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was wondering how to fix this white screen i tryed a hard reboot ( whitch i heard might work ) but did nothink if there is no sulution to fixing this is it worth buying a new screen ? thaanks

    Try here:
    iOS: Not responding or does not turn on
    If yu can't turn it off, then let the battery fully drain. After charging for at least an hour try again.
    If still not successful that indicates a hardware problem and service is required.

  • I was using my ipod touch and it was fully charged and it shut off and it wont bring me to the home screen

    i was using my ipod touch and it was fully charged and it shut off on me and when i go to charge it all it shows is the apple sign

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • HT2534 I can't use my Apple ID on my iPod in the iTunes store. What do I do?

    What's happening is I made a new Apple ID and verified it, but then when I went to the iTunes store on my iPod it wouldn't let me use it. I don't know if I am doing anything wrong, but when I tried to sign in it said "This Apple ID has not been used

  • Peak detection in certain frequency

    Hello everyone. I am a rookie of labview, and I want to realize a program. The program reads in data and then do FFT transform. After getting FFT waveform, I want to search the waveform for peak in certain frequency, say 0.4~0.6Hz, and then output it

  • AQ: Automatic dequeuing

    Hallo, AQ is new to me. Therefor i have a question. I set up a queue table, a queue and everything works fine. Handmade queing and dequeing works too. But how can i automatic dequeue messages, arriving in the queue. Is the a mechanism, perhaps aqdms.

  • Space between fields in a page

    Hi, I have around 5 fields in a custom page one below the other. But i am unable to figure out how to create space between those fields vertically? Any suggestions are appreciated. Thank you

  • TX hotsync with Vista, Hot Sync 7.0 hangs when updating date book

    Hotsync of my Palm TX, with hotsync 7.0, Windows Vista is failing. Hangs on date book, step 2 of 13. Have to kill task with task manager to recover. Worked a few times after initial install. Log says did not transfer all data items to desktop. Sugges