HT1349 my laptop got corrupted and recovered but i am not able to connect my iphone to my laptop

my laptop got corrupted and recovered but i am not able to connect my iphone to my laptop. Pls help me to recovery my iphone.

I had the same problem with my wife's iPhone 4, go to settings, network an see if 3G is activated in your phone, also check if data is activated, if this don't work, than the problem is not in the phone but with the carrier.
Your phone may show the 3G or the Edge network icon next to the signal bar, but 3G and Edge may not be really activated for your phone in your carrier network, even if you have a data plan, sometimes their activation department kind of forget to activate the full service in their network, it already happen to us several times.
Call your carrier and confirm if they really activated the 3G or Edge data in your phone in their network according to your data plan . They may need your phone's EMEI and ICCID numbers, you will find it at settings, info
Hope that helps

Similar Messages

  • Hi, i installed d latest version of itunes on my pc, but still am not able to connect my iPhone with that...

    hi, i installed the latest version of itune on my pc, but still i am not able to connect my iPhone with my pc....

    The top window says Accessing iTunes Store and the animation underneath will
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

    I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

    Try popping out the SIM card and turn off the phone.
    Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
    Tell me how did you unlock your phone!?

  • I bought new laptop with 64bit win 7 but i am not able to download itunes?

    I
    bought new laptop with 64bit win 7 but i am not able to download itunes?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • I have Windows 8 and Itunes 64 bit.  Not able to synch any iphones or ipads with this version.

    I have Windows 8 and Itunes 64 bit.  Not able to synch any iphones or ipads with this version.

    A Google search should provide a number of instructional links.

  • Hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!!!

    hello, i changed my mediathek-folder due to space-problems and since then i am not able to fill the iphone (4) with music anymore. also i cant delete music in itunes, which already is on the iphone... HELP!
    does anybody know how to solve this problem? thx!

    If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

  • I have an iPad which I usually connect to my iPhone 4s for 'personal hotspot' when I travel. I am planning to buy a bluetooth keyboard for my iPad and wondering if I will be able to connect/pair iPhone 4s and the keyboard at the same time!! Anyone??

    I have an iPad which I usually connect to my iPhone 4s to use the 'personal hotspot' when I travel. I am planning to buy a bluetooth keyboard for my iPad and wondering if I will be able to connect/pair iPhone 4s and the keyboard at the same time!! Anyone??

    The likely problem is your expectations you cant sync using bluetooth these are the supported profiles
    http://support.apple.com/kb/ht3647

  • I have installed itunes but get massage coming up saying cannot be used because required software is not installed, run itunes installer to remove itunes, then install itunes again. I have done this but still not able to connect my iphone, ipad or ipod.

    I have installed itunes, but when connecting the iphone, ipad or ipod it states the following:-
    Connot be used because required software is not installed run itunes installer to
    remove itunes, then install itune again.
    I have done this on a number od times, but still having the same message coming up.
    Please can you help me.
    Kind regards
    Caroline Jones

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Problems with seeing computers on the network map but they are not able to connect with each other

    Hi All,
    We have 6 HP pavillion Slimline s3620f PCS(Pentium Dual COre ED200) with 10/100 and wireless connections.  They are running Windows Vista Home 64.  We are also trying to connect a macbook, a laptop with vista 32, and a a mac with win xp running via bootcamp.  We upgraded to the WRT160Nv2 for wireless access. 
    We have the cable modem connected to the router.  The router is connected to a switch.  On the network map, all connections are working/green(can access internet).  Before this, in the vista network map each computer could connect to the other.  NOw each computer can only connect to the router and one particular other computer.  Each computer lists itself and that one particular other computer and the router.  If I look at the full map, all are listed but they cannot connect to each other. 
    I hope this makes sense.  Any suggestions?
    L

    Your computer firewall is not recongnizing your router.
    Greetings from Northern Ontario, Canada

  • Not able to connect Iphone 4s to MacBook Air. iTunes gives an error  message and there is a constant aural

    Hi,
    I am not able to connect my iPhone 4s to my Macbook Air. There is constant audio alert and the iTunes error message says" ITunes could not connect to this phone. The device is no longer connected. I have been connecting with our any problem to my Windows Laptop (Win7) but get this error message on the recently purchased MacBook Air.
    Request a solution. Best wishes,
    Ashokcee

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How do i retrieve file vault protected files from an external hard disk that used to be my mbp's hard drive? the hard disk got corrupted and will no longer boot. I put it in an enclosure and attempted to copy my files but failed because of FV encryption.

    This external hard disk used to serve as the main drive of my mbp. It got corrupted and the OSX would no longer load. I upgraded to a 500gb hd and used the old hd as an external drive. I tried to copy my files but i could not access them because of the filevault encryption. 110gb of hd space appears as used which means that my files are still in the drive. Is there a way to retrieve these files? thanks

    According to your post, you're using Leopard, so FileVault only encrypts your user folder (unlike Lion). On the mounted external drive, in your user folder, you should see a file called username.sparsebundle, with username being your user name. Double-click that file to open it and it should prompt you for a password. Type in your password and the file will mount as a volume in Finder. You should be able to copy all of your files over.

  • My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a soluti

    My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a solution.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is stil

    My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows.  The system is up and running on the SSD, with my old system disk now used for storage as it is still readable.  The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop.  Can you point me to the best way to do this?  - Thanks

    If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I tried to update Photoshop CS6 through CC, and PS got corrupted and wont open now.

    I tried to update Photoshop CS6 through CC, and PS got corrupted and wont open now. I uninstalled it, but now I can't re-install photoshop...installer just gives me the option to uninstall.
    This is my job, so very important .
    Thanks
    Johnny

    Download the CS6 installer from this link it should install on any machine the meets the specs. Even without a serial it should install as a trial version. If CS6 was activated on your system your CS6 credentials should still be there and when you install it should be activated. Then use CS6 menu Help>Updates to install the updated,  CS6 installs need to be updated.

Maybe you are looking for