HT1349 my mac pro which is bought in hong kong cant get into the window! Can i fix it from your store? PS: my warrent has already ended.

I cant open my mac book window so i cant get serial number . Can i bring it to the apple store to fix it?

Probably the best idea although do read their Terms Of Use first. Do realize that anybody here who answers your question is in contravention of the YOU as much as you would be for posing the question.
But good luck
Pete

Similar Messages

  • HT1338 I have just bought a new MacBook Pro, switch it on and followed the Setup Assistant. Now the Mac is asking me for a password to access the computer. Assistant Setup did cover a password to access Mac. Not a good start, as I cannot get into the driv

    Just open up the box to my new MacBook Pro. Have gone through Assistant Setup. The Mac is asking for a password. Assistant Setup did not ask for a password to be setup. I cannot get into the computer as its requires a password that I did not set up? Why it is doing this I have no idea. I tried my Apple ID password, no luck. Any other options?

    At the risk of asking the obvious, Have you tried not entering anything and then hitting "Return"?
    Hope this helps

  • Can I add a ram of 1333mhz in my mac pro which had a stock of 1066mhz. Will the ram be compatible ???....because ,I was not able to find a 1066 MHz of ram in apple store. And it's for my mac pro which I bought recently a month ago

    Can Anyone help me out for a good solution?

    DDR3 is backward compatible, no one really buys theirs from Apple, you can do a lot better on price and warranty going elsewhere.
    http://support.apple.com/kb/HT4433
    http://macperformanceguide.com/Recommended-MacPro-Memory.html
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1333-memory

  • I own a mac pro which i bought from thailand but i live in Maldives , why can't i buy an app for my mac pro from Maldives ?

    i own a mac pro but i cant buy any apple software to my mac because they dont accept my credit card

    You appear to have boght a Mac and taken it to a country with no iTunes/Mac App Store. So there is nowhere for you to buy. You must buy from the stores for your country and there isn't one that I can find.

  • I paid for lion because my 2006 mac pro will not run anything newer (arbitrary decision by apple). Downloaded it, but nothing happened. App Store now says i've already downloaded it, so I can't try again. App store also says lion isn't available in usa.

    I found out that an 06 mac pro cannot be updated to anything more recent than lion. They guys at the local shop told me this after they tried to update it for me so I could run logic pro 9 in 64 bit mode. I bought lion. Waited two days for the emails. Spent hours following the instructions which sounded so simple until you try them. Finally I found the "redeem" button that was hidden because the size of my safari window was too small to show it and there was no bar at the bottom to scroll over. Without googling "how do you find the app store" and "how do you find quick links" I never would have figured it out. I only mention this so that others may learn from my mistakes. Finally I downloaded lion, supposedly, but nothing happened. There is no indication that anything downloaded, other than the fact that when I try to download it again, it says it's already been downloaded. I spent four hundred bucks at the shop updating, plus whatever they charged me for lion, and I've still got snow leopard and logic pro running at 32 bits. I'm pretty sure nobody can help me, but could you please arrange for the return of my time?

    You can go to "Purchases" tab and check again.
    If OS X Lion is still not downloading, try at a different network environment.
    By the way, Mac Pro (2006) with a newer graphics card runs Mavericks perfectly with modifications in the installer.
    It's not allowed to be discussed here, but you can simply google how to do it.

  • Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago. Proglamet says that the computer does not support Power PC. Help

    Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago.
    Proglamet says that the computer does not support Power PC. Help
    When I try to start it says (program "Acrobat 6.0.2 Professional.app" can not open because PowerPC applications are no longer supported.)
    Please help

    The version of Acrobat you have is a PowerPC application and will not run on Mountain Lion.  You will need to upgrade/purchase an Intel version of Acrobat Pro, probably Version 9.
    It might have been worth checking to see if the apps you run are supported on ML before upgrading.  If you backed up your system before the upgrade you could always revert to your previous level.

  • Hi, i am living in Vietnam but bought a Macbook pro on my trip to Hong Kong.  I cannot access Facebook on Mac in vietnam.  Please help.  Thanks.

    Hi, i am living in Vietnam but bought a Macbook pro on my trip to Hong Kong.  I cannot access Facebook on Mac in vietnam.  Please help.  Thanks.
    I also bought Microsoft Office Home and Student and cant use the Outlook.  Is there anyway to just install the Outlook on my Mac?  Or i have to buy a new one which is is Home and Business?
    Thanks,
    Julie

    Try enabling the Personal Hotspot on the iPhone and connecting the Mac to the Internet thru it. If Facebook works ok then, that would mean the ISP is either blocking or having connection problems whereas the phone carrier is not.
    Be mindful that carrier data charges can be outrageous so use this as a test first.

  • I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    .. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update"  It's a full version "upgrade" that has to be done using the install discs (or disc images).
    -DH

  • I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

    Hi, I have an early 2008 Mac Pro which has re-booting problems.
    Processor speed is: 2.8
    Memory: 2GB 800 MHz DDR2 FB-DIMM
    2 x 28GHz Quad Core Intel Xeon
    I am running OSX Yosemite Version 10.10
    My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
    I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
    This worked for a few days and then the same problem started again.
    I am beginning to wonder if I need to buy a new hard drive.
    If there is anyone who has some answers to help me solve my problem, I would be most grateful.
    Robert

    When you have the beachball activity, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Refer below link once
    App doesn’t open | Progress wheel spins continually

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    Hi Jeff,
    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
    Then Reset your Keychain...
    http://support.apple.com/kb/TS1544

  • Trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
    I quote
    How to update software on your Apple TV (2nd and 3rd generation)
    Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
    Update your software
    Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
    Click Download and Install to start the download process.
    Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

  • Cant get into my mac book pro, asking to change my password to let me in and it wont

    Cant get into my mac book pro, asking to change my password to let me in and it wont.

    Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
    Change the Admin Password with Mac OS X Single User Mode
    Reset mac mini admin password: Apple Support Communities

Maybe you are looking for