HT1349 Online Radio Help Needed

I have a new PC and I can't seem to get the radio part of iTunes to come up with a list of all the stations. Can someone please help me fix this. Thanks so much in advance

samamit78 wrote:
Hi I am in newzealand & wish to go to Fiji for holiday for couple of months. Since, I want to get connect to my business I am thinking of buying sps Online Number from skype. It will be great if I could get a fair idea, if I buy subscription of Online Number in newzealand & redirect my local landline number to "skype's online number". Is it possible that by doing that I can take call in Fiji on my iphone 4 (with internet access) or it is only accessible in New Zealand ?
If it's only accessible in NZ is there any other way that my landline call transfer to my local Fiji mobile number ?
Thanks in advance for your Answer !!
Cheers
Sam
I received a private message from you with these questions, and have replied directly to you. Please feel free to post further questions here on this message thread, so that others may also benefit from the discussion.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Similar Messages

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Help needed on online theme creation for mobile phones

Hello everybody,
I want to create an web application which will create themes for different mobile phones. In that application end user can upload jpg/gif images of there choice and select the mobile phone make like Nokia and also the model number like 6030. After that they can create their desired theme by clicking on a button and also can download it.
My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
Can anybody give any suggestion on this matter?
Thanks in advance.
Tanmoy

Hi everybody,
My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
Please give me any guideline that I can proceed.
Help needed.
Thanks in advance.
Tanmoy

Safari not responding - When trying to listen to Online Radio ???

Hello,
I am tired of waiting on phone to get some support from local apple store...
So i hope you guys can help me out. I just bought a new mac book pro in Agust, and i have updated all sowftware and everything should work properly, But i always get this problem with listening to Online radio station..
Link to the station is : http://dfm.ru/active/pageonline/ , there you can pick various genre of music..
So when i pick a music station, a window will popp up with a music controls , like Play, Pause, and volume.
It starts to play in like 5 seconds, But after 20-30 sec it stops playing and safari just stop responding!!!
I tried to quit all programs and try to listen to the station, but it still makes safari stop responding...
Here is a screenshot of what i see in my Activity Monitor and Force quit application.
http://img222.imageshack.us/img222/4823/safarinotresponding.jpg
Hope someone has solved this problem before and can give me some good advice...
Thank you very much!!!

HI and Welcome to Apple Discussions...
I just tried the site and no volume here either. I don't believe it's your browser causing the problem, but instead the web site needs to do maintenance.
Has this site worked for you in the past or is this the first time?
I just tried that site using the Firefox browser and it does not work there either.
It's not your Safari causing the problem. Not being able to read the text myself, look for a support link that you can use to contact their support area.
This is not something that anyone at Apple could help you with anyway.
Carolyn
Message was edited by: Carolyn Samit

I cant stream online radio on my iphone 4

I just got my iphone 4 and i tryed to play a online radio through sefari but it says "the operation nat be completed" but my old iphone 3 played it just fine

Hi, I recently had this same problem.
I had an iphone 3gs that i jailbroke from AT&T to use on straight talk. then I bought an iphone 4, backed up my 3GS to itunes on my computer. When I activated my new ip4, i reloaded all my backed up files to the new phone and discovered that I could do everything except send pics via texts. I could send them via imessage, I could send them via email, i could upload to anything I wanted to, i just couldnt send a pic via text. worked with the carrier, worked with Apple. Then I backed up the phone again, reset it to factory settings, then started up from Hello again and BEFORE i reloaded all my stuff from itunes, i tried to send a pic via text and it WORKED. Then i restored all my stuff from itunes and then it didn't work AGAIN. I got online with Justin in Support with Apple and he had me do the regular reset; Settings>General>Reset>Reset All Settings. this will take your phone back to factory settings but WILL NOT discard all your contacts or other media, but you will have to reset your ringtones, text tones, etc, and any other settings you may have changed such as text size....I need it big.....anyway, i hope that i helped someone with this. I'm glad it was just this simple for me, because all my other settings were fine, mms was on, etc. but if you do a backup from one iphone to itunes and then download it to your new phone, it could be something in one of those files, or a corrupted file or just a simple setting from one carrier to the next that's stopping you. Hope this helps!!

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

I am unable to use SiriusCanada.ca online radio (same for IE)

I am a registered customer of Sirius Canada satellite radio and as such am entitled to listen online.
I have registered with them and spoken to them many times.
But I still cannot get connected with the online service. I have tried IE and it does not connect either.
I have uninstalled and re-installed Firefox.
I have restarted without the Add-ons.
I am using Windows 7 which is fully updated.
I am using Firefox 8.01.
I listen to other online radio just fine.

Thanks so much for your response.
Not the shortcuts made to local folders, and SOME of the shortcuts work now.....Yahoo messenger works, Google Earth works, but that is about it. Basically any shortcut that goes to a website "tries" to come up, but only the "frame outline" of the page starts, then you have to end task to get that removed. I have tried making new shortcuts but they do the same thing, which makes me think something is "leftover" from Mozilla Firefox uninstall. I have removed the Installation folder, also searched for the prefetch files, just as the help section recommended. Uninstall was done thru control panel, and I even used a third part uninstall (crap cleaner) to try again...I have checked, and Firefox is no longer listed as the default browser.....IE is.....I would just like to have the IE shortcuts work now...
Thanks again,
Donvon....

1941W configuration help needed

Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A        192.168.10.x
Vlan 11 for Cisco _Kamran_BGN   192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#

Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
conf t
interface     Dot11Radio0
no ssid     Cisco_Kamran_BGN
no encryption mode     ciphers aes-ccm
exit
interface     Dot11Radio1
no encryption mode     ciphers aes-ccm
no ssid     Cisco_Kamran_A
exit
dot11 ssid     Cisco_Kamran_A
vlan 10
dot11 ssid     Cisco_Kamran_BGN
vlan 11
exit
interface     Dot11Radio0
encryption vlan 11     mode ciphers aes
ssid     Cisco_Kamran_BGN
exit
interface     dot11radio0.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio 0.11
encapsulation     dot1q 11
bridge-group 11
Configuration of     subinterfaces and main interface
within the same bridge     group is not permitted
exit
interface     Dot11Radio1
encryption vlan 10     mode ciphers aes-ccm
ssid     Cisco_Kamran_A
interface     dot11radio1.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio1.10
encapuslation     dot1q 10
bridge-group 10
Configuration of subinterfaces and main     interface
within the same bridge     group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home

Cannot listen to online radio streaming using Windows Media Player

Online radio websites that use Windows Media Player - opens up the player in new window but instead of buffering, says that it is playing but no output/sound. Definitely not security/pop up/firewall issue. Windows Media Player works fine playing CDs etc.

Hi there,
so, you definitively have a machine whichs plays sound and you can establish a internetconnection. I think its a pure mediaplayer problem (softwareproblem).
You have the following options:
1. Reinstall your mediaplayer or update it.
2. install another mediaplayer software like winamp or some other jukebox
3. ..no further options
Give some feedback, so I can maybe help you with your problem. ;)
Cheers

Problem: DPM could not reserve the drive resource because one of required drive resources is not online or it needs cleaning or servicing. (ID 24052)

Hi,
Is there any way I can get around this problem (see notes below)?
Here is the problem I am having:
Type: Dataset copy
Status: Failed
Description: DPM could not reserve the drive resource because one of required drive resources is not online or it needs cleaning or servicing. (ID 24052)
Here is why it is happening (Background)
Supported and unsupported scenarios in DPM
http://technet.microsoft.com/en-us/library/dn554221.aspx
Multiple long-term tape goals that use dataset-copy jobs fail if you only have a single tape drive
Issue: DPM doesn’t support multiple long-term backup goals if you only have a single tape drive.
Workaround: Add a second tape drive to DPM or to the tape library.
Notes:
I have verified that the option for the number of tape copies is not greater than 1 for any protection goal in any of the 3 protection groups.
I do have multiple long-term backup goals, and I only have a single tape drive. I don’t want to add a second tape drive to DPM or to the tape library. I think this is a ridiculous solution. I was thinking of creating two types of backup
jobs for ones for short term backups and for one larger job long term backups (weekly and monthly).
The tape backups complete, just the "Dataset copy" doesn't happen.
Environment:
Windows Server 2012
SCDPM 2012 R2
Tape backup library, with one drive.

Hi,
I understand your frustration but unfortunately there is no workaround for this issue. I have brought this issue up with the product group for consideration for future enhancement.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

I want to make an online radio with java

I want to make an online radio with java. Can someone point in the right direction in what I would need to know and do.

you will have to learn about java media framework.
And probably live audio streaming too

Trying to stream online radio station to no avail

hi guys,
just wondered if with my internet connection it would be possible to stream an online radio station (www.passionradiobristol.com) using my connection which is fairly slow (300k). I know this is pretty poor but here in my region of Brazil it's limited. Is it possible, maybe I can do something to optimise the setup?
any help most appreciated! My favourite radio program is on this channel!
Ben

Get this optimizer and see if it helps: http://www.versiontracker.com/dyn/moreinfo/macosx/12591
There aren't such good reviews about it, but it must work for some people, or it wouldn't be available.

Cannot Update My Billing Information- URGENT HELP NEEDED

My credit card expired and when i try to update my billing information the "save" button doesn't work. I tried it on Chrome, Firefox, Explorer...on a PC and a Mac.. clear cookies and history several times and nothing. I tried it for several days now. I Just dont got any message on the page. That "save" button doesent do any action.
If i go to the "Profile" tab and return to "Plan Information" tab then this message appers:
"We're sorry, something seems to be wrong on our end. Please try again later."
This new adobe site is horrible... so buggy!
Tried the online chat help and the guy could't do anything and sugested to do it by phone and the Adobe Portugal Custumer help number listed on the adobe DOSENT WORK!!!!!!
I have 2 creative cloud packs about to expired in the next days and my company cannot produce whithout creative cloud products
I NEED THIS FIXED ADOBE, ASAP!

The number that appers on the Portuguese page is: 800-833-6687 ... it dosent work!!!!!!
What is this, an American number, British??? What????
Adobe site sucks whith lack of information and bad services.
I want to pay for my creative cloud packs and i can't for several days now.
Online chat is useless!
The page still not working today keeps showing the message "We're sorry, something seems to be wrong on our end. Please try again later." on the payment info tab. I have 2 days until i'm unable to get my packs to work.
I NEED THIS FIXED ADOBE!

Help needed with breadcrums???

Hi thank you for reading,
On my site
http://www.dorff.nl/huize%20beekhuizen.html
you will see a nice page. On this page ive got no complaints.
Alle the text and images are looking good. But to have this i had to change the settings of the breadcrums.
Now all my other pages look like this..
file:///C:/Users/Gast%20Account/Desktop/vakantiehuizensuriname%20website/appartement%20she rida.html
As you can see there is too much space between the text and the photos. it seems i cant do one page without effecting an other.
Need some help to figure this out.
Regards Brian

all spaces are removed..
here is the link..
http://www.dorff.nl/appartementsherida.html
Regards Brian
Date: Thu, 26 Apr 2012 12:26:58 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with breadcrums???
    Re: Help needed with breadcrums???
    created by Ken Binney in Dreamweaver - View the full discussion
Hi Brian - Please remove spaces from all file and folder names. Use a hyphen or underscorehuize%20beekhuizen.html Please put sherida.html online and post a link for us
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4363367#4363367
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4363367#4363367. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

HT1349 Online Radio Help Needed

Similar Messages

Maybe you are looking for