HT1349 tried to reset to factory setting and it just has logo and just cycles

yes i tried to set to factory settings  , i bought from a friend at work now the phone just wont do anything but logo and cycle, tries to reboot every ten minutes or so, held down the top button and the bottom button and it fianlly turned on when i turned back on same thing

http://support.apple.com/kb/HT1808
Try this

Similar Messages

  • I have a Mac Mini late 2012 version and i am trying to reset to factory setting.

    Hello, I had a bought a Mac Mini late 2012 version a couple months ago, and after i tried to install "pro tool" on my Mac, and FAILED. my Garage band wouldn't open anymore. it only tells me "garage band quit unexpectedly" when i open it. I tried uninstalled it and reinstall it again, but it still won't work.
    So now, I want to jus5 restore the whole Mac mini to factory setting and erase everything in it.
    I had read some of the threads in the community, and the Mac mini late 2012 doesn't come with an OS disk.
    Therefore, is there anyone can tell me how i would be able to rest the Mac Mini later 2012 version back to factory setting and erase everything in it?
    Thank you very much!
    PS: i am not using Apple keyboard.

    See:
    http://support.apple.com/kb/HT4718

  • Thinkpad twist (s230u) bad sectors and trying to reset to factory software

    Hi all
    My thinkpad suddenly not starting. During bootup, I tried to scan and fix sectors but after 3-4 hours, it said it can not be done (after finding like 400 errors). May be the hard drive is partially corrupted. I tried to reset to factory setting from within startup screen it went till 42% and hung for two days. When I restarted it can not now complete even factory reset.
    Is there a way I can get factory os installation and settings from online lenovo website? Any help is appreciated.
    By the way my laptop is out of warranty.
    Thanks
    Anil
    Solved!
    Go to Solution.

    Good day and welcome to the community.
    Sorry you're having difficulty.
    Your best bet would be to call Support (info below) to request recovery media, as it is not available as a download.
    Hope this helps.
    Regards.
    United States
    THINK-branded products
    English
    1-800-426-7378
    24 hours a day 7 days/week
    Software Premium Support - Windows & Android Operating Systems
    English
    1-855-271-3879
    8AM-11PM Eastern, daily
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • I baught second hand iMac and having trouble to reset to factory setting Help pls

    I baught second hand iMac and having trouble to reset to factory setting Help pls

    The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1937 Can I get my secondhand iPhone 4 reset to factory setting?

    Can I get my secondhand iPhone 4 reset to factory setting? It is on uk carrier 3 and I would like to use it on the Tmobile or Virgin carriers and give it to my daughter for her birthday on 16-02-

    Resetting an iPhone to factory settigns isn't an issue, you can easily do that by connecting it to iTunes and hitting the "Restore" button.  If the iPhone is currently locked to the UK carrier Three, you won't be able to use it with a SIM card from any other carrier without getting the UK carrier to authorize an unlock.  I believe that the UK carriers all offer this to their customers but it might cost you a fee.  If you are not a customer of Three, you might have more problems getting an unlock form them though.

  • HT1414 i have iphone 4s with ios 6 installed, if i want to reset to factory setting which ios 6 is not signed by apple anymore , am is still able to do it?

    i have iphone 4s with ios 6 installed, if i want to reset to factory setting which ios 6 is not signed by apple anymore , am is still able to do it?
    i have problem with the software , my sound sometimes just turn mute and back again after few minutes. when i recieve phone call phone ring like no problem at all, but when i open musics i can play song, no tool bar volume below the play button. message and all notification went mute just vibrate.
    i want to restore to factory setting , i currently using 6.0.1 and i still want to use this ios since 7.1.1 have a lot of bugs.
    do i still can restore to factory setiing i currently use. ?
    please show me how to do it if still posible.
    thx so much

    No, restoring the phone will install the latest iOS version.
    If you go to Settings > General > Reset > Erase All Content and Settings, the phone will revert to its fresh out of the box state, but iOS will not be reloaded - you'll still have iOS 6. See if the problem is fixed, and if it is, load your data back manually.

  • My iphone 4 screen black out suddently! I tried to restore to factory setting but still nothing show up on screen! Anyone can help?

    My iphone 4 screen black out suddently! I tried to restore to factory setting but still nothing show up on screen! Anyone can help?

    1st, u could just restart ur home, pressing the home and power botton together for few sec,if it wont work .....
    2nd, try restore ur phone with itune, and it ****** me off last time when i dont normally backup with my itune after the icould thing showup, so restore with icloud backup wont 100% work, if not just try restore from older icloud backup. if it still wont work.....
    3rd hand it over the the apple dealer... they are the pro... never ever open it up urself or bring it to one of ur so call SMART FRIENDS, they will freak up ur phone even worst.... i think this method will definately solve ur problem..

  • I can't restore factory setting on my old iPhone 4 and i dont know why? I have a iPhone 6 attached to my iTunes - is it something to do with that?

    I can't restore factory setting on my old iPhone 4 and i dont know why? I have a iPhone 6 attached to my iTunes - is it something to do with that? I would like to pass my iPhone on to a family member but would prefer if it was wiped before - thank you for your help

    What happens when you try to reset it? Have you gone to Settings/General/Reset on the phone and tapped Erase all content and settings?

  • HT201412 I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avai

    I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avail. HELP

    I had a similar issue and it was password case sensitive issue

  • HT4061 Getting message "Connect to Itunes" on my iphone 4s. I tried but went to factory setting in lock mode? Help me to unlock

    Getting message "Connect to Itunes" on my iphone 4s. I tried but went to factory setting in lock mode? Help me to unlock?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • How do you download the reset/reload factory setting on the apple website?

    My ipod nano has had a flashing apple icon every time i try to turn it on. i have read another post that explains how to fix this problem but i do not understand one of the steps that says to download the reset/reload factory setting.

    i do not understand one of the steps that says to download the reset/reload factory setting
    Here's a step-by-step for Restoring the iPod back to factory settings:
    http://docs.info.apple.com/article.html?artnum=60983

  • I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

    hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

    You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
    You're not doing anything wrong - it just isn't a feature of iOS devices.
    What were you hoping a Bluetooth connection would allow you to do?

  • How to reset all setting on my iphone 4s? when i have done procedure for reseting my screen has gone and showing only apple logo and i taking very long time i cant off or on?

    i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/

    try holding the home and power buttons at the same time for about a minute!

Maybe you are looking for

  • ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

    Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3.  I tried ADE 4 but no better.  I have a

  • 1.1.1 update fixes Exchange email sync issue

    Before the update, when I deleted an email on Exchange on my PC and then hit the wireless/update button on the iPhone, the message would be deleted on the phone. But when I deleted an email on the device, it would never get deleted on the Exchange se

  • How to load data into table Using Script Task

    We have a directory/folder where we have a file. We need to insert the File Created Date , File Name , Extension into the database table of Sql server by using Script Task. So could you please suggest , how to frame the connection string , fetch the

  • Creating file in server using 10g database and forms6i(unix operating syst

    I want to create a text file in server using(thin client) d2k 6i open 'a' mode then line by line put fil_name like /a1/a2/a3.txt Thanks Reena

  • BAPI Return Sales Order

    Hi, I am trying to create an LSMW to create return orders using the standard SAP provided BAPI's. I've seen plenty of posts about how Business Object BUS2032 doesn't work for Return orders with the Document Cetagory H, however I cannot find any BAPI