HT1349 What if you can't turn on your phone and computer won't read it. How do you get support

How can I get support if my iphone won't come on or connect to computer. It went off while talking on it. It has a charge and has been running good.

Hold down the home and power buttons at the same time. It may take 20 seconds or so. This should force it to reboot. If it doesn't, make an appointment at the genius bar.

Similar Messages

  • I go on settings to turn my mic on and it won't let me how can I turn it on ?, I go on settings to turn my mic on and it won't let me how can I turn it on ?

    I was using my apps fine but one time I opened them and it said I needed to turn on the mic so I went to the setting general privacy and it wouldn't let me do anything how can I turn on my mic ?

    Hello Carera01,
    Thank you for the details of the microphone issue you are experiencing on your iPhone.  I recommend the following steps for the issue you described:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find the full article here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPod touch 5th generation won't turn on or charge and the home button is broken, how do I get it working?

    I've tried buying new chargers and plugging them into different outlets around the house but the iPod will not respond to anything.  The home button is broken so I can't reset the iPod by holding both the home and lock screen buttons down, and it won't even connect to iTunes when plugged into my computer.  How can I fix this issue? The iPod never overheated or anything, and it still had charge left before it quit responding.

    Unfortunately for you, the home button is necessary for reset and also to put the device into recovery mode or DFU mode. Since that is not working, and the device is not recognized in iTunes, check the charging port area. There could be dust, lint, etc, that is blocking the connection for charging, and connecting to iTunes. If nothing seems wrong there, then make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location. There is no other option.

  • TS1702 I lost an app after updating my iPad2. I can't find it in purchases and it was £27.99. How do I get it back?!

    Anyone else had this?

    Audiobooks will download to the Music app on an iPad - when you have audiobooks on the iPad you should get an Audiobooks option under the More button at the bottom of the Music app.
    Note that audiobooks are currently a one-time only download from the store, so you may want to copy it to your computer's iTunes via File > Transfer Purchases (File > Devices > Transfer Purchases if you have iTunes 11 on your computer) so that you can take a backup of it - it should copy over to the Books part of your computer's iTunes library

  • HT1459 my ipod touch 4s won't turn on, reset, charge, and computer won't recognize it

    i was watching videos with my ipod. After a while i realized that my ipod was almost dead on power so when i was about to charge it, it turned off. i turned on and charged it and then i left it charging. when i came back my ipod was off and now it won't turn on even if i reset it or charge it from my pc. help!

    Try a different power outlet, then try restarting your iPod by holding down the on/off and the home buttons at the same time until you see the Apple logo. 

  • HT1414 I have a new phone I plugged it in to iTunes and clicked restore instead of set up new phone and old junk is on here how do I get it back to what it just was?

    I need help so if someone knows how to fix this I would be excited

    On your phone: Settings>General>Reset>Erase all Content & Settings, or Plug it in, iTunes running, and hit the "Restore" button on the Summary Pane...eject when finished. Either choice will return the phone to a state just like it was when first taken out of the box.

  • Can not turn on redirect phone calls on iphone 4S. What can i do?

    Can not turn on redirect phone calls on iphone 4S. What can i do?

    Contact your carrier to insure that there is nothing wrong with your account. SMS is a carrier feature, so start there.

  • My iPad froze and it can't turn on. I've watched some youtube videos on how to restore my iPad. Occasionally, it worked on my friend's iPad, but not in mine. It can't restore because some sort of codes appear after I try to restore it. Help pls thank you

    My iPad froze and it can't turn on. I've watched some youtube videos on how to restore my iPad. Occasionally, it worked on my friend's iPad, but not in mine. It can't restore because some sort of codes appear after I try to restore it. Help pls thank you

    Your iPad has be jailbreaked . None here can help.

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

    What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

    If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
    Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
    Cheers,
    GB

  • What are the differences between Turn in Final Timesheet and the other option: Send Progress for Selected Tasks?

    Hello,
    The resource filled his/her timesheet in PWA. 
    Now : 
    What are the differences between Turn in Final Timesheet
    and the other option: Send Progress for Selected Tasks?
    Thanks

    You are partially correct and partially wrong.
    Turn
    in Final Timesheet sends
    the timesheet to the Timesheet Manager for Approval
    but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
    Yes
    after approval progress will be available in MPP as well as in Projectweb app as % complete . 
    Send
    Progress for Selected Tasks 
    Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
    app as % complete.
    In Send
    Progress for Selected Tasks Timesheet
    Manager doesn't receive anything in his Approval center
    because all the update directly go to Status manager Approval center.
    Here you have to understand
    that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
    actual approval) 
    kirtesh

  • HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
    This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
    Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
    If I needed the lobotomized version I'd be using my iPad!
    Any way (official or hack) to change this button back to its proper funcionality?
    Thanks!

    cterra wrote:
    How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
    Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

  • I can't turn my i phone off

    i can't turn off my phone.
    it is a 3 or 3s whatever but none the less i cant re boot it.
    can anyone help

    Press the sleep/wake button & home button at the same time, keep pressing until your phone turns off. You can either release at that point or keep pressing until you see the Apple logo...that's an iPhone reset.

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I recently did a full restore to iPhone4 but I can't turn on my iCloud. It won't let me enter my correct Apple account username, keeps defaulting to the old invalid username. Please help!

    I recently did a full restore to iPhone4 but I can't turn on my iCloud. It won't let me enter my correct Apple account username, keeps defaulting to the old invalid username. Please help!

    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    You'll need to use the instructions in the link above to put it in recovery mode.

Maybe you are looking for