HT1349 which number on the back of the Iphone 4 is the serial number

my Iphone wont turn on even after doing a hard reset
help

The serial number is not on the back of your iPhone. You will need to go to Settings>General>About to find your serial number or check the box your iPhone arrived in. If you cannot turn on your iPhone try charging your iPhone via a wall socket for 15-20 minutes and then try resetting it again by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

Similar Messages

Which standard is the serial Port of the Tecra A9

Which standard is the serial Port of the Tecra A9?
Is it RS-232?

Everything what I know is that its a 9pin serial port

Which Bluetooth has read back texts for iPhone 4

Which Bluetooth has read back texts for iPhone 4

non it's not a feature the bluetooth headset does (well if there is a bluetooth profiles for just that it's not supported by ios)
but all a2dp supporting bluetooth headset will play all! audio otherwise played out of the wired headset or ios device speaker out the bluetooth headset so if the ios device support having sms's read bakc to you like with Siri
then any a2dp headset will work

HT1349 I PUT IN THE SERIAL NUMBER AND IT KEEP TELLING ME THAT IT IS INVALID I AM UNABLE TO CHAT OR TALK TO APPLE-. VERY FRUSTRATING

I have changed the 0's to o's and caps and nothing will let me in.
I have taken the serial number right off of the box, off of the information on the hardware, the software,,, everything,,, and it will NOT let me int.
I used to work for APPLE when the mouse was invented and it became a MAC... now I just can't keep up with it.....
I just want to find out why my address book keeps syncing and now I have almost 50 of individual names.... I can't stop it.
Now it tells me to choose a community, none of them fit what I am asking???????
Now I am in a iphone communtiey and that is not where I wanted to be at all.

See if this page helps : http://support.apple.com/kb/TS1646
e.g. is the format of your address on your iTunes account exactly the same as on your credit card's billing address ?

HT1349 How to find the serial number of my iPad that has been stolen?

Hi all,
My iPad's been stolen, and in part of the police report that I'm filing, the serial number of the iPad would be required.
I do not have the packaging with me so I'm not sure how to retrieve this. Apparently I could use my Apple account, however, after logging in, I'm unable to find any such link that would help me retrieve this.
Appreciate any ideas, guys.
Thanks.

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

My MacBook was stolen over Christmas and i cannot find my serial number, i have a time machine which my macbook was backed up to can i retrieve my serial number from it and how?

Anyone able to advise how to trace the serial number of my macbook pro that was stolen, I used it to purchase from iTunes and i have a Time machine with back up info. It was bought in 2009 and i cannot find my receipts for the police but need to provide a serial number? Help please

If you enabled the Find My Mac application, than you can locate it from http://icloud.com
If you do not have, than you should contact apple through the Apple Support Lane: https://expresslane.apple.com
You can contact me by Private Message anytime for more help.

I need help in reloading my Acrobat 7.0 Standard for which I have the serial number but not the media.

Attempts to follow links on your website have not produced a solution.

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Is it possible to track which itunes account is using my lost iphone 4, through imei/serial number?

I lost my iphone 1 month back. I have been logging on icloud and have been checking Find My iphone regularly. So far the person who took the phone connected on Internet once. When that happened I got an email...but no GPS locations as such. I would like to know whether it would be possible to check (using IMEI or Serial number) which account is using my phone other than my own account...just wondering whether there is something like that. thanks.

No, it is not possible.
Report the device lost/stolen to law enforcement and move on with your life.
FYI, if they have signed in with a new Apple ID or restored it and then signed in with a new Apple ID it will never show on "Find My iPhone" when signed in with any other Apple ID.
Apple does not track lost/stolen devices.

I was recently given Adobe Premiere Elements 9, it keeps saying the serial number on the box is invalid. What can I do?

I was recently given Adobe Premiere Elements 9 from a friend who no longer uses it and knew I was interested in it. but when it comes to installing it, it keeps saying the serial number on the box is invalid. What can I do?
I have tried entering it all different ways. I'm not dumb I know which one is the serial number this isn't my first Adobe product. Any help would be welcomed.

Error "The serial number is not valid for this product" | Creative Suite

I bought photoshop elements, the serial number comes up as invalid. I know its right. .what do i do?

I am having trouble installing Photoshop Elements 12. I get to the screen where I can input my serial number and it says it is invalid. in fact the number on the box and the receipt which also has the serial number on it match perfectly but they seem to be one number too long than what can be inputed. What is wrong?? I don't know what to do!

If you bought a boxed product then the serial number should be inside the box in the CD sleeve (this is exactly 24 characters long - 6 x 4). See this picture:
If, on the other hand, you have an insert in the box rather than a serial number then you have what is called a Redemption Code. See this picture:
If this is the case then you need to redeem your code for a real serial number:
<http://helpx.adobe.com/x-productkb/global/redemption-code-help.html#purchasedproduct>
If none of the above then clearly there isn't a real solution.

I cant find the serial number on my iphone 4th gen and im locked out

im locked out of my iphone 4th gen which mean i cant get into my iphone to find the serial i dont want to be told how to get my self in atm i need some help finding out which is the serial there is a
FCC ID or a IC
which one is the serial please help

If you're locked out because of a forgotten passcode, you don't need the serial number. You need to restore the phone.
iOS: Forgot passcode or device disabled

Where does PSE8 save the serial number?

I have three iMacs at home, but I only use two of them since the first one is broken. I had PSE8 installed on the iMacs, and during the summer bought CS5. Since I didn't need to use PSE8 on this iMac, I deinstalled it by dragging it to the trash can. Then about a month ago I purchased another new iMac, and installed PSE8 on it.
When I try to use PSE8 on the newest iMac a dialog box appears on the screen indicating that I have to either buy a new serial number, or deactivate PSE8 in one of the three iMacs, because I already have the serial number in three computers. My question is as follows:
Where in my iMac (the one I use with CS5) can I find the PSE8 serial number so I can drag it to the trash? I looked in the Library/Preferences folder and noticed that there are still a few PSE8 files left behind, but have no idea which one contains the serial number. Any ideas?
Thanks in advance.

I apologize for posting on the wrong forum.
The problem with the activation/deactivation of PSE8 was solved, but first I will explain in detail what the problem was since all Adobe applications go through the same process (serial number activation/deactivation).
ORIGINAL PROBLEM: I had installed PSE8 twice and then deinstalled it at later dates. However, deinstalling an Adobe application does not deactivate the serial number (this number is left behind somewhere in the system along a few other files). So, I installed CS5 on this iMac a few months ago, and got rid of PSE8. Then a few weeks ago I bought another iMac and installed PSE8 on it, and here is where the problem began. When launching PSE8 on this iMac, a window would appear on the screen indicating that I already had the same serial number installed in two other computers, and that therefore I had 30 days to solve the problem.
SOLUTION:
a. Reinstalled PSE8 on the older iMac, launched it, and then chose "Deactivate" from the Help Menu and proceeded to deactivate PSE8
b. Then I "deinstalled" PSE8 from this iMac, since I don't need it (I have CS5 on it)
c. Launched PSE8 in the new iMac, and chose "Activate Serial Number" on the window mentioned in the last sentence of the "Original Problem" above, and this time it accepted the serial number because it could not find it in the older iMac that was still on my home network
I hope that this could be of help to others.

Is it possible to choose the serial port if only the run time engine is installed

I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example “Hardeware input output -> serial -> Labview serial vi"). When I build an application and try to run this program on a computer where only the run time engine 6.1 is installed, it is not possible to choose the serial port. Since there is no “Measurement and Automation Explorer” available on the run time engine and no directory C:\VXIpnp is created, when the run time engine is installed, I do not see a way, how I can satisfy the computer with the information it needs for configuring
the different ports. Any suggestions?

Hi Daniel,
Before LV6.1 there was LV5.1 In LV5.1 the way to Spedify a resource was to use a string control with correct VIsa Resource Class identifier. For eg. "GPIB0::11" or "ASRL1::INSTR". With Introduction of VISA Resource Name Control and linking with MAX, These names are Available from Pull Down List and Can be Aliased, meaning ASRL1 which is Serial Port 1 can be called COM1 and so on. However the old method still works with all 6.1 Controls. Only thing is you have to make sure you Dont Conflict the Class Names ie Use "GPIB::.." instead of "ASRL..." when addressing Serial Port VI's.
To solve your Problem I would Build a Menu ring with COM1 to COM4 in the Pull Down List.
Next, If I use the Traditonal Serial Port VI wich accepts the Integer as Seria
l Port #. I just Wire the Menu Ring to this VI.(Remember COM1 is 0, COM2 is 1 for this VI)
If I use VISA Config Serial Post. I build an Array Constant with Corresponding VISA Class Names So in our case a String Array Constant of 4 elements "ASRL1::INST" to "ASRL4::INST". I Use Index Array Function With the Index Wired to my Menu Ring. The Array Input Terminal Wired to the Array Constant. The Output of this Array will be correct Visa Class Name Based on slection of my Menu Ring. I can Wire this as Input to my VISA Config Serial Port Vi.
I have attached a Small VI to Illustrate this.
Drawback: You must Predefine what Ports you will Want to Use. Basically you define all the cases.
I hope this Answers your Q!
Good Luck
Mache
Good Luck!
Mache
Attachments:
Serial_Port_Select.vi ‏36 KB

PC crash... getinng back an InDesign CS6 version, which was an upgrade from a CS3 product... looks like the serial number I have is for the initial CS3

I had InDesign CS3... which I upgraded in 2012 to CS6... two days ago my PC crashed... and I need to reload InDesign... I downloaded from Adobe.com InDesign CS6... but when entering my serial number, I got a message saying that my serial n° is valid but that there is no eligible product on my PC... I suspect that my serial n° is related to the initial C3 version I had bought... I guess that I could download CS3 from Adobe.com... and use my serial number... but how I do get back my CS6 upgrade? Thanks a million for any hlep!!!!!!!!!!!!!!!

OK, here is the situation:
* I am an Adobe customer
* I bought in 2008 CSInDesign CS3 and I have the serial n° [removed by moderator] in my Adobe account (shows as Adobe InDesign, version = CS3, platform = Win)
* In 2012, I upgraded my CS3 to CS6 and I have a serial n° [removed by moderator] for that in my Adobe account (shows as Adobe InDesign, version = 8.0, platform = Win)
After my PC crash, I downloaded InDesign CS6 and use my serial n° of 2012. It doesn't work, as it says my product is not eligible.
So, here is where I stand now...
* I downloaded CS3 and used my serial n° for InDesign CS3. It works. I now have CS3 on my PC
* How do I get back my 'upgrade from CS3 to CS6?
* I have the serial number for that upgrage and I guess I need to download an "upgrade" file somewhere from Adobe. But I cannot find it, I found pages with upgrades, but there are so many different files, I do not have a clue which one to use;
This is now my key question... can someone give me the link to access the file(s) I have to download to upgrade my InDesign CS3 version to InDesign CS6

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of session and I take 3 weeks or more with this problem if they can support me solve it was the number of seire wearing this being installed at a private university

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

HT1349 which number on the back of the Iphone 4 is the serial number

Similar Messages

Maybe you are looking for