HT1351 for syncing it takes long time and not completed what to do???
for syncing it takes long time and not completed what to do???
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius
Similar Messages
-
Problem Export to Excel it takes long time and Takes more space.
Hello All,
when we export to Excel in portal(reports), it takes long time and it takes more space.
how to overcome this problem please any one knows provide the proper solution for this issues
Regards,
Ch.Hi Chetans,
I have had the same problem, and I had to create a OSS message to SAP in order to solve this issue, until now I don't have an answer. They made me to change a lot of configuration in Java and BW without luck. To tell you more, when we try to export to excel the java instance restarts aumotatically.
But we have this problem, when we try to export a huge quantity of data, so I found a note which says the limitation of exporting to excel. Take a special attention to the Performance section.
Note 1178857
[https://service.sap.com/sap/support/notes/1178857|https://service.sap.com/sap/support/notes/1178857]
I recomend you that you create a message to SAP. If you find a solution, please let me know.
Regards, Federico -
I can not sync with itunes iphone , is catching, and when it begins to sync is a long time and then appears a message that no time to help sincronização.Me am without some music
You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
-
SQL Developer, Deploy Cloud Cart Status is at Approved for a long time and not moving forward i.e. not processing.
Please help.
Thanks
SrinivasHi Gustavo,
It appears your Service SFTP user was not created correctly. Please contact support and mention the fact that your Service SFTP user appears on Security/Users tab and not on Security/SFTP Users tab.
Vlad -
When downloading Creative Cloud, it stalls for a long time and never completely download. How can I resolve this issue?
CueTheArts for information on how to resolve download errors please see Error downloading and installing Creative Cloud application. You are welcome to update this discussion if you have any questions regarding the steps listed within the document.
-
Validate map in FDM takes long time and finally expires
Hi,
I have an issue with FDM Mapping.
When i click the "validate" option in workflow, the FDM processing takes long time (more than an hour) and finally expires.
But when i open a new web interface, i am seeing a gold fish on validate - which means validate mapping has been done.
As we are in production environmeny, Can someone quickly clarify me, why this happen.
Thanks,
SivaHello Kelly,
Something you said concerns me: +"Because we automated data loads for the large file, this issue is extremely low on the priority list."+
In this type of scenario we notice customers/partners implementing FDM as an 'ETL' utility. FDM is not an ETL utility and should not be treated/used as such. In the event that you are doing this, Support has no control of the application as it is a mis-use of what FDM is for.
Files that are being pushed into FDM should always be broken down into the smallest components(locations) and used as a 'front end,' user interface.... not a server-side/IT application. If you meet this criteria of FDM, then there is not much Support can do.
If you do not think you are misusing FDM, I would highly suggest you open/create a Support SR if you do not use FDM in that manor. Consultants/Partners are functional/design based.... and not necessarily trained as Support Engineers. Therefore they might not have the skills required to make such determinations.
Thank you,
Oracle Global Customer Support -
Query Saving takes long time and giving error
Hi Gurus,
I am creating one query that have lot of calculations (CKF & RKF).
When I am trying to save this query it is taking long time and it is giving error like RFC_ERROR_SYSTEM_FAILURE, Query Designer must be restarted, further work not possible.
Please give me the solution for this.
Thanks,
RChowdaryHi Chowdary,
Check the following note: 316470.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=316470
The note details are:
Symptom
There are no authorizations to change roles. Consequently, the system displays no roles when you save workbooks in the BEx Analyzer. In the BEx browser, you cannot move or change workbooks, documents, folders and so on.
Other terms
BW 2.0B, 2.0A, 20A, 20B, frontend, error 172, Business Explorer,
RFC_ERROR_SYSTEM_FAILURE, NOT_AUTHORIZED, S_USER_TCD, RAISE_EXCEPTION,
LPRGN_STRUCTUREU04, SAPLPRGN_STRUCTURE, PRGN_STRU_SAVE_NODES
Reason and Prerequisites
The authorizations below are not assigned to the user.
Solution
Assign authorization for roles
To assign authorizations for a role, execute the following steps:
1. Start Transaction Role maintenance (PFCG)
2. Select a role
3. Choose the "Change" switch
4. Choose tab title "Authorizations"
5. Choose the "Change authorization data" switch
6. Choose "+ Manually" switch
7. Enter "S_USER_AGR" as "Authorization object"
8. Expand "Basis: Administration"/"Authorization: Role check""
9. From "Activity" select "Create or generate" and others like "Display" or "Change"
10. Under "Role Name", enter all roles that are supposed to be shown or changed. Enter "*" for all roles.
11. You can re-enter authorization object "S_USER_AGR" for other activities.
Assign authorization for transactions
If a user is granted the authorization for changing a role, he/she should also be granted the authorization for all transactions contained in the role. Add these transaction codes to authorization object S_USER_TCD.
1. Start the role maintenance transaction (PFCG).
2. Select a role.
3. Click on "Change".
4. Choose the "Authorizations" tab.
5. Click on "Change authorization data".
6. Click on "+ manually".
7. Specify "S_USER_TCD" as "Authorization object".
8. Expand "Basis - Administration"/"Authorizations: Transactions in Roles".
9. Under "Transaction", choose at least "RRMX" (for BW reports), "SAP_BW_TEMPLATE" (for BW Web Templates), "SAP_BW_QUERY" (for BW Queries and/or "SAP_BW_CRYSTAL" (for Crystal reports) or "*". Values with "SAP_BW_..." are not transactions, they are special node types (see transaction code NODE_TYPE_DEFINITION).
Using the SAP System Trace (Transaction ST01), you can identify the transaction that causes NOT_AUTHORIZED.
Prevent user assignment
Having the authorization for changing roles, the user is not only able to change the menu but also to assign users. If you want to prevent the latter, the user must loose the authorization for Transactions User Maintenance (SU01) and Role maintenance (PFCG).
Z1>Note
Refer to Note 197601, which provides information on the different display of BEx Browser, BEx Analyzer and Easy Access menu.
Please refer to Note 373979 about authorizations to save workbooks.
Check in the transaction ST22 for more details on the Query designer failure or query log file.
With Regards,
Ravi Kanth.
Edited by: Ravi kanth on Apr 9, 2009 6:02 PM -
MDX report rendering takes long time and showing Conflict Message
Hi All,
This is my MDX Query
with member
[Measures].[Rent] as
IIF(IsEmpty([Measures].[Budget]),
NULL, [Measures].[Rent])
select {[Measures].[Rent]}
on columns,
[Property].[Address].[All].children *
DESCENDANTS([Account].[Account Hierarchy].[Account Group].[Expenditures],
[Account].[Account Tree].[Account]) *
[Property].[Property].[All].children
on rows
from
[Master]
When i comment [Property] Dimension member , i am able to get the result, but i need Property Dimension in MDX.
Can anyone give some idea ?
Thanks in advanceHi Jarugulalaks,
According to your description, it take long time to render the report when using [Property] dimension, right?
In this case, the issue can be caused by that there are too many members under this dimension. In your query, you used CrossJoin function to join multiple dimensions which might cause the performance issue. If you cross-join medium-sized or large-sized sets
(e.g., sets that contain more than 100 items each), you can end up with a result set that contains many thousands of items—enough to seriously impair performance. You can use the NonEmptyCrossjoin function instead of Corssjoin function. For the detail
information, please see:
http://sqlmag.com/data-access/cross-join-performance
http://msdn.microsoft.com/en-us/library/ms144797.aspx
Besides, the total time to generate a reporting server report can be divided into 3 elements: Time to retrieve the data (TimeDataRetrieval); Time to process the report (TimeProcessing); Time to render the report (TimeRendering). For the detail information,
please refer to the link below to see Charlie's reply.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a0962b54-6fc2-4111-b8f1-a3722a65fa05/how-to-improve-performance-of-report?forum=sqlanalysisservices#a0962b54-6fc2-4111-b8f1-a3722a65fa05
Regards,
Charlie Liao
TechNet Community Support -
Installing patch 5217019 takes long time and does not end
Hi,
I try to install patch 5217109 to my TEST instance.While installing patch the 8 workers are selected default.7 of workers are in statu of completed but 1 worker is waiting for long times and does not end.
What can be my problem?Start time for file is: Mon Aug 10 2009 11:45:01
sqlplus -s APPS/***** @/oracle/TEST/testappl/ad/11.5.0/admin/sql/adpcpcmp.pls APPLSYS &pw_fnd APPS &pw_apps &systempwd 8 1 NONE FALSE
Arguments are:
AOL_schema = APPLSYS, AOL_password = *****,
Schema_to_compile = APPS, Schema_to_compile_pw = *****,
SYSTEM_password = *****, Total_workers = 8, Logical_worker_num = 1
Object_type_to_not_compile = NONE
Use_stored_dependencies = FALSE
Connected.
Checking for previously-invalid objects which are now valid...
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Commit complete.
Elapsed: 00:00:00.00
Deleting any errors from previous run of this logical worker
0 rows deleted.
Elapsed: 00:00:00.00
Commit complete.
Elapsed: 00:00:00.00
Compiling invalid objects... -
Syncing Contacts Takes Long Time
I am a fairly new iPhone user syncing to a MacBook Pro running 10.5.8. It seems my syncing of contacts takes an unusually long time. I only have 240 contacts in Address Book and even if I have not made any changes to a contact, iTunes sits on Syncing Contacts for several minutes. Eventually it does move on to Calendar, Notes, etc. but those all go very quickly. The couple of times that the contacts sync quickly it seems like some updates did not actually sync. Something seems wrong.
Any ideas what could be going on or more importantly, how I can correct this slow syncing?
Thanks,
DavidHere is some additional information on this issue. After a visit to the local Genius Bar today we were able to determine that the problem of the long contact sync time is associated with iTunes trying to sync the contacts with Yahoo. The solution would be to stop that sync process. The problem is we can't figure out how to do that.
We have unchecked the sync. to Yahoo option in iTunes but it still tries to sync even with that choice unselected. In fact, the Yahoo box opens two times on each sync. If I hit cancel, the contacts sync right away.
The Apple Genius says the only suggestion he has is to do an archieve & install of the OS. This seems to be a radical alternative.
I have deleted every preference file I can think of, have reset the iSync software to first sync status and nothing seems to help. I searched these discussion boards and several people have raised this issue but no one seems to have a solution. A search of the Internet has not yielded any results either. I suspect there is a preference file somewhere that I am missing.
Any suggestions would be appreciated.
Thanks,
David -
Web report for opening it takes long time how to reduce the time?
HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj -
Un-Registering takes long time and fails!!!
I am trying to un register a schema that ia already registered in the XML DB. I am using JDeveloper to un register and it really takes a long time to do this. and eventually fails.
what is going on? what is broken?
XML DB is flaky and unreliable.
right?First make sure that all connections that have used the XML Schema are disconnected. Schema deletion cannot start until all sessions that are using the schema have been closed as it needs to get an exclusive lock on the SGA entrires related to the XML Schema.
If there are a large number of rows in the table(s) associated with the XML Schema truncate the table before dropping the XML Schema. If there are a large number of XDB repository resources assocaited with the table, truncate the table and then delete the resources with DBMS_XDB.DELETERESOURCE() mode 2 or 4 to ignore errors and avoid dangling ref issues.
To monitor the progress of deleteSchema itself connect as sys and execute select count(*) from all_objects where owner = 'XXXX'. XXXX should be the name of the owner of the database schema that was the owner of the XML schema. See if the number of objects owned by that user is decreasing. If the number of object is decreasing have patience. -
Application Builder takes long time and Popup messages during Build
Hi All,
My application is slightly bigger with over 300 VI's. In between the build process I receive pop up messages asking GMath library files etc.. are modifies would u like to save the files..? When clicked on OK button it starts saving these library files and when it saves almost half the number of files the application builder crashes and causes LabView to close. As the build process is taking more than 2 hours and end result is always an unsuccesful build due to the application builder crash I am loosing my time.
Regards,
Pavan
Solved!
Go to Solution.Hi,
I recently upgraded from LV 7.1 to 2009, both the Professional versions. My program consists of several hundred vi's. Building an .exe in LV 7.1 was a snap and took maybe 30-50 seconds (not including an installer). Building the same thing in LV 2009 (build script converted to project) takes nearly 30 minutes, not including creating an installer... most of the time is spent 'processing' and then saving vi's, which LV 7 did not appear to do. I've tried the Ctrl+Shift+Run suggested by JB but this does not help. I've also applied the 2009f patch. It still takes a fair amount of memory, 0.5 GB, but my core 2 duo PC has 2 GB and there is plenty available RAM. Any suggestions/details on the differences and something I could do to cut down on the build time?
thanks,
Dan -
Table Import Takes long time and still running
Hi All,
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping
but when i check the sapce of tablespace that is also not consuming
one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
ORA-39065: unexpected master process exception in RECEIVE
ORA-39078: unable to dequeue message for agent MCP from queue "KUPC$C_1_20120622102502"
Job "CDR"."SYS_IMPORT_TABLE_03" stopped due to fatal error at 12:10
i done some google on the same proble
and i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
streams_pool_size big integer 48M
But still it takes time
Any help1) check the session :
SQL> select username,sid,serial#,status,event,seconds_in_wait,wait_time,state,module from v$session where username='CDR'
2 ;
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 73 1 ACTIVE wait for unread message on broadcast channel 3 0 WAITING
CDR 75 1 ACTIVE wait for unread message on broadcast channel 10 0 WAITING
CDR 77 1 ACTIVE wait for unread message on broadcast channel 10 0 WAITING
CDR 81 313 ACTIVE wait for unread message on broadcast channel 530 0 WAITING impdp.exe
CDR 87 70 ACTIVE enq: SS - contention 1581 0 WAITING toad.exe
CDR 90 1575 ACTIVE wait for unread message on broadcast channel 3 0 WAITING
CDR 92 1686 ACTIVE enq: SS - contention 619 0 WAITING
CDR 99 5 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 103 3 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 105 6 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 107 6 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 108 16 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 109 40 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 110 6 ACTIVE enq: TX - row lock contention 1 0 WAITING TOAD 9.1.0.62
CDR 111 21 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 112 27 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 113 8 ACTIVE log buffer space 0 0 WAITING TOAD 9.1.0.62
CDR 117 4496 ACTIVE db file scattered read 0 0 WAITING TOAD 9.1.0.62
CDR 119 9 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 120 27 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 123 1 ACTIVE sort segment request 22349 0 WAITING
CDR 129 22 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 131 14402 INACTIVE SQL*Net message from client 2580 0 WAITING TOAD 9.1.0.62
CDR 135 11 ACTIVE log buffer space 0 0 WAITING TOAD 9.1.0.62
CDR 136 6 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 138 234 ACTIVE sort segment request 19859 0 WAITING
CDR 162 782 INACTIVE SQL*Net message from client 550 0 WAITING TOAD 9.1.0.62
2) check the impprt status:
SQL> select owner_name, job_name, operation, job_mode, state FROM dba_datapump_jobs;
OWNER_NAME JOB_NAME OPERATION JOB_MODE STATE
CDR SYS_IMPORT_TABLE_01 IMPORT TABLE EXECUTING
3) in a new window
C:\Documents and Settings\vikas>impdp cdr/cdr123_awcc@tsiindia dumpfile=CAT_IN_DATA_042012.dmp tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log directory=test_dir parallel=4
Import: Release 10.1.0.2.0 - Production on Friday, 22 June, 2012 15:04
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_01": cdr/********@tsiindia dumpfile=CAT_IN_DATA_042012.dmp tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log directory=test_dir parallel=4 -
Clear operation takes long time and gets interrupted in ThreadGate.doWait
Hi,
We are running Coherence 3.5.3 cluster with 16 storage enabled nodes and 24 storage disabled nodes. We have about hundred of partitioned caches with NearCaches (invalidation strategy = PRESENT, size limit for different caches 60-200K) and backup count = 1. For each cache we have a notion of cache A and cache B. Every day either A or B is active and is used by business logic while the other one is inactive, not used and empty. Daily we load fresh data to inactive caches, mark them as active (switch business logic to work with fresh data from those caches), and clear all yesterday's data in those caches which are not used today.
So at the end of data load we execute NamedCache.clear() operation for each inactive cache from storage disabled node. From time to time, 1-2 times a week, the clear operation fails on one of 2 our biggest caches (one has 1.2M entries and another one has 350K entries). We did some investigations and found that NamedCache.clear operation fires many events within Coherence cluster to clear NearCaches so that operation is quite expensive. In some other simular posts there were suggestions to not use NamedCache.clear, but rather use NamedCache.destroy, however that doesn't work for us in current timelines. So we implemented simple retry logic that retries NamedCache.clear() operation up to 4 times with increasing delay between the attempts (1min, 2 min, 4 min).
However that didn't help. 3 out of those attempts failed with the same error on one storage enabled node and 1 out of those 4 attempts failed on another storage enabled node. In all cases a Coherence worker thread that is executing ClearRequest on storage enabled node got interrupted by Guardian after it reached its timeout while it was waiting on lock object at ThreadGate.doWait. Please see below:
Log from the node that calls NamedCache.clear()
Portable(com.tangosol.util.WrapperException): (Wrapped: Failed request execution for ProductDistributedCache service on Member(Id=26, Timestamp=2012-09-04 13:37:43.922, Address=32.83.113.116:10000, MachineId=3149, Location=machine:mac305,process:2
7091,member:mac305.instance1, Role=storage) (Wrapped: ThreadGate{State=GATE_CLOSING, ActiveCount=3, CloseCount=0, ClosingT
hread= Thread[ProductDistributedCacheWorker:1,5,ProductDistributedCache]}) null) null
Caused by:
Portable(java.lang.InterruptedException) ( << comment: this came form storage enabled node >> )
at java.lang.Object.wait(Native Method)
at com.tangosol.util.ThreadGate.doWait(ThreadGate.java:489)
at com.tangosol.util.ThreadGate.close(ThreadGate.java:239)
at com.tangosol.util.SegmentedConcurrentMap.lock(SegmentedConcurrentMap.java:180)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:27)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ClearRequest.run(DistributedCache.CDB:1)
at com.tangosol.coherence.component.util.DaemonPool$WrapperTask.run(DaemonPool.CDB:1)
at com.tangosol.coherence.component.util.DaemonPool$WrapperTask.run(DaemonPool.CDB:32)
at com.tangosol.coherence.component.util.DaemonPool$Daemon.onNotify(DaemonPool.CDB:63)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
Log from the that storage enabled node which threw an exception
Sat Sep 08 04:38:37 EDT 2012|**ERROR**| com.tangosol.coherence.component.util.logOutput.Log4j | 2012-09-08 04:38:37.720/31330
1.617 Oracle Coherence EE 3.5.3/465 <Error> (thread=DistributedCache:ProductDistributedCache, member=26): Attempting recovery
(due to soft timeout) of Guard{Daemon=ProductDistributedCacheWorker:1} |Client Details{sdpGrid:,ClientName: ClientInstanceN
ame: ,ClientThreadName: }| Logger@9259509 3.5.3/465
Sat Sep 08 04:38:37 EDT 2012|**WARN**| com.tangosol.coherence.component.util.logOutput.Log4j | 2012-09-08 04:38:37.720/313301
.617 Oracle Coherence EE 3.5.3/465 <Warning> (thread=Recovery Thread, member=26): A worker thread has been executing task: Message "ClearRequest"
FromMember=Member(Id=38, Timestamp=2012-09-07 10:12:27.402, Address=32.83.113.120:10000, MachineId=40810, Location=machine:
mac313,process:22837,member:mac313.instance1, Role=maintenance)
FromMessageId=5278229
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=1
ToPollId=0
Poll=null
Packets
[000]=Directed{PacketType=0x0DDF00D5, ToId=26, FromId=38, Direction=Incoming, ReceivedMillis=04:36:49.718, ToMemberSet=nu
ll, ServiceId=6, MessageType=1, FromMessageId=5278229, ToMessageId=337177, MessagePartCount=1, MessagePartIndex=0, NackInProg
ress=false, ResendScheduled=none, Timeout=none, PendingResendSkips=0, DeliveryState=unsent, Body=0x000D551F0085B8DF9FAECE8001
0101010204084080C001C1F80000000000000010000000000000000000000000000000000000000000000000, Body.length=57}
Service=DistributedCache{Name=ProductDistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, B
ackupCount=1, AssignedPartitions=16, BackupPartitions=16}
ToMemberSet=MemberSet(Size=1, BitSetCount=2
Member(Id=26, Timestamp=2012-09-04 13:37:43.922, Address=32.83.113.116:10000, MachineId=3149, Location=machine:mac305,process:27091,member:mac305.instance1, Role=storage)
NotifySent=false
} for 108002ms and appears to be stuck; attempting to interrupt: ProductDistributedCacheWorker:1 |Client Details{sdpGrid:,C
lientName: ClientInstanceName: ,ClientThreadName: }| Logger@9259509 3.5.3/465
I am looking for your help. Please let me know if you see what is the reason for the issue and how to address it.
Thank youToday we had that issue again and I have gathered some more information.
Everything was the same as I described in the previous posts in this thread: first attempt to clear a cache failed and next 3 retries also failed. All 4 times 2 storage enabled nodes had that "... A worker thread has been executing task: Message "ClearRequest" ..." error message and got interrupted by Guardian.
However after that I had some time to do further experiments. Our App has cache management UI that allows to clear any cache. So I started repeatedly taking thread dumps on those 2 storage enabled nodes which failed to clear the cache and executed cache clear operation form that UI. One of storage enabled nodes successfully cleared its part, but the other still failed. It failed with completely same error.
So, I have a thread dump which I took while cache clear operation was in progress. It shows that a thread which is processing that ClearRequest is stuck waiting in ThreadGate.close method:
at java.lang.Object.wait(Native Method)
at com.tangosol.util.ThreadGate.doWait(ThreadGate.java:489)
at com.tangosol.util.ThreadGate.close(ThreadGate.java:239)
at com.tangosol.util.SegmentedConcurrentMap.lock(SegmentedConcurrentMap.java:180)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onClearRequest(DistributedCache.CDB:27)
at
All subsequents attempts to clear cache from cache management UI failed until we restarted that storage enabled node.
It looks like some thread left ThreadGate in a locked state, and any further attempts to apply a lock as part of ClearRequest message fail. May be it is known issue of Coherence 3.5.3?
Thanks
Maybe you are looking for
-
Graphics problem with mbp late 2008,nvidia geforce 8600m gt.any help?
Hi,have graphics problems with my MacBook Pro 17" Late 2008.Every 3-4 days the graphics are not ok and when i want to restart there is only the apple logo but not clear and the cursor seems to be double.Sory my english is not the best.Any help for th
-
None no longer appears in my payment methods therefore i cannot DL free apps. How can i fix this problem ? I do not have a debit or credit card either.
-
Spelling temporarily disabled???
At the top of the InDesign forum page, one finds this: ANNOUNCEMENT: File Attachements temporarily disabled Show Details Would advise turning on spell checking...
-
Shared global data in multi-plugin file
Ok, I see that in the SelectoramaShape example that it is possible to put multiple plug-ins in a single file...cool. My question: is global data visible/shareable between the plug-ins? My situation is this: I have a visible filter plug-in ("Trigger")
-
Internet Backgammon is not in Windows 8.1
Why did Microsoft leave Internet Backgammon ... Internet Hearts ... etc out of Windows 8.1? I really miss it and would like to find a way to have it on my new laptop. Can you help?