HT1351 my computer cant even tell that my ipod is connected.
my computer cant even tell my ipod is connected. the cable is connected to my ipod and the other side to my usb port, what should i do?
Well.
It was the cord.
I was using a third party one that didn't jive well with my new laptop.
Similar Messages
-
So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Computer does not notice that my iPod is connected
Whenever I plug my iPod into my computer, My iPod will light up, but iTunes doesn't notice it is there, and neither does my computer, it will not charge or sync music which is very annoying, seeing as I just got it for Christmas...
Help me please, any ideas are welcome,
Thanks in advanceHave you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB -
I just got a new nano and downloaded the most up to date itunes then I plugged it into my computer and it does not turn on at all, no charge image and my computer doesn't even recognize that there is a connection. How do I fix this?
By calling iPod tech support while you are under warranty. You also have 14 days to return it w/no questions asked for a replacement or your $$$ back.
-
Trying to downLoad CS4 trial to sort problems but cant even get THAT working! Help please?
Hello again ever one.....Futher to yesterday's post http://forums.adobe.com/thread/462839?tstart=0
I STILL cannot get DW 8 to work correctly, and after exhausting every other avenue, I though I would try to down load the CS4 trial! I have followed all the instruction but I cant even get that to down load correctly!!
Here is the problem...
I have waited for both the exe and 7z files to fully down load but when I double click the exe file (as per instructions) I get this message
I then fiddled with it a bit more.. not quite sure what I did, have have down loaded it again! I got a message that windows didnt know which programe had created it ... etc... not knowing what to do I navigated to DW 8... and NOW i get this message...
ANY help very much needed and welcomed!Well, "Access denied". You either have a permissions problem, your temporary directories are full or the drive is in an unhealthy state otherwise. Log in as administrator, run CCleaner, defragment the drive, check the directory privileges for your other user...
Mylenium -
i forgot the password of my restrictions and i cant even back up my ipod becuz i fotgot the password what can i do ?
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities
What do you mean by this: " i cant even back up my ipod becuz i fotgot the password"? Password for what? -
I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?
Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.
-
I CANNOT ACTIVATE MY ILLUSTRATOR AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
got a itouch on ebay and it says ipod is disabled and i connect to my computer itunes it tells me itunes could not connect to the ipod because it is LOCKED with a passcode you must enter passcode on ipod before it can be used with itunes. I asked people I
iOS: Unable to update or restore
-
Windows not recognizing that my ipod is connected
Right now im annoyed!! What happened is this! I got a ipon nano for christmas and installed all the software on my mums computer at home, the ipod worked fine. I returned to my house after xmas and installed the software again, and everytime i instert my wire nothing happens, the screen on my ipod doesnt change and itunes says that no ipod is connected. I tried uninstalling everything and reinstalling, still didnt work, so then tried installing updater, but asked me to connect ipod to update, still didnt recognize my ipod. I read through all of my leaflets and noticed that it said that ipod can onloy be installed on any one computer or apple device at anytime?
So yesterday i went into the apple store, and they played around with my wire as they thought it might be the problem, they were NO help at all, just told me it worked and theres and to go home and try it, needles to say it didnt work, ive just tried my wire in my friends laptop who is an ipod shuffle and it worked fine. Now what the **** is going on?? its utterly disgraceful that these things cost so much and i cant use it!Okay, first, lets try putting the iPod into Disk Mode then it should be recognized by the computer. Does it say "Do Not Disconnect" on the iPod when it's connected?
-
My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi...the pc that my ipod was connected crashed and i wanted to switch it to my laptop now..the question is will i lose all my pictures and songs from my ipod if i switch PC's or is there a way to make it stay since u have icloud backup on my ipod. i really dont want to lose my pictures so plz let me know if there is a way...thank you
The iCloud backup does not include non-Tunes purchased music and photos that were synced to the iPod. The iCloud backup does not also included a few other things included in the iPod backup that iTunes makes.
The iPod backup that iTunes makes does also not included non-iTunes purchases and photos synced to the iPod.
free programs like iFunBox with copy non-iTunes purchased music and some other things from iPod to computer. A paid program like TouchCopy is needed to copy photos synced to the iPod to a computer. -
When I connect my iPod Nano to the same installation of iTunes that we use for my wife's iPod Classic I am getting the message that "an iPod is connected but cannot be properly identified". This has worked before and I can connect my wife's iPod Classic and synch with no problems. I have tried resetting the Nano but that did not fix it. I am running Windows Vista. Has anyone else had this problem?
I fixed it. In itunes click help, run diagnostics, run tests, the test comes to ipod and says it is not running correctly so click the HELP and follow the instructions to the end. Mine was fixed after i restarted computer!!!
-
ITunes doesn't detect that my iPod is connected
I plugged my iPod touch in today so I could sync it, and the USB found sound was played, followed by a USB error sound. iTunes did not recognise that my iPod was connected and would not sync it.
I looked in Device Manager and there was an exclamation mark over Apple iPod, and the following message was displayed:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
I don't know why this is happening, as I successfully synced my iPod yesterday with no issues.
Can anyone help?
ThanksI am having this same problem. I have been able to sync before, but now when I attach my ipod, itunes does not recognize it. The PC thinks it's another drive letter, and itunes never shows it in the list on the left.
Any ideas how to correct this? -
So it's stuck in the low battery screen and it cant turn on.
My computer cant recognize my device and restoring couldnt work.
Tried holding the home button and the turn on/off button, didnt work.Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Suggest that you take full advantage of the above.
Maybe you are looking for
-
Sort Field to be made mandatory while creating maintenance plan(IP42)
Hi Experts, Please suggest me the way by which i can make the field "Sort field" mandatory while creating maintenance plan (IP42). Regards, Vivek
-
Writing Boolean variables to MS SQL Server
I cannot figure this out. In the script I'm working on, a boolean variable can be dynamic either True / False ,etc I cannot get the syntex correct to write this variable to a "binary" datatype column in SQL Server. Column name in database is Binary I
-
Had problems with having the serial number acknowledged by the Photoshop Elements 12 (Organiser worked fine but Editor wouldn't open). Chat support suggested I delete and reinstall program from an Adobe website download link. Have done that and now
-
Blackberry Desktop Software Not Working on Windows 7
Dear Fellows, Downloaded and installed Blackberry Desktop Software without any error, but when you click to start the program it says "Blackberry Desktop Software has stopped working" following are the lines shows in detailed information: "Descriptio
-
Hi All, When purchasing creates the info record we populate a price linked to that supplier/part # combination. Later, if we get a price change, we would like to update that field so that it autopopulates the requisition with the correct value - but