HT1355 can an application start and stop airplane mode?

can a native application start and stop airplane mode on the iPhone and iPad?

No. It must be done manually by the phone user.

Similar Messages

Can Video widgets start and stop when entering and exiting the browser viewport?

I like to use multiple autoplaying/looping video clips on a single page but I need to figure out how to make the videos start only when they enter the viewport on a browser and stop after they exit the viewport. Does anyone know a way to do this?

I do not know if this can have an affect on it but the videos are being downloaded through multiple computers to a private server and being accessed through the mac. Please let me know what you think.

Can OS X start (and stop) bash by itself?

A little earlier I noticed some data coming in to my Mac over the internet, perhaps a couple of megabytes, which is not unusual in itself, but I checked in Activity Monitor at that moment, and saw that bash was running and then quit moments after the data ceased coming in. I have not seen this before, yet have many times observed which processes are running.
Knowing very little of computer science or the use of shells, I felt it best to ask of someone who knows for sure, and so am humbly doing so here.
Will

Applications and other running processes sometimes create shells or faceless background processes as part of their normal operation, which exit after whatever task is done. If you click on the Inspect button for it, you may find out more details about what it's being used for.
(53821)

Script to auto start and stop an application

Ok, I'm looking for an easy solution, maybe someone can point me in the right direction:
I have a security camera program that runs on a Mac Mini that I would like to start and stop at a specific time of day. Is there an easy way to create an Applescript to do that?
Thanks much in advance.

Two scripts and iCal can do this for you. However, it assumes that your workstation is always logged into the Finder and that your app can be scripted beyond start and stop.
--Script 1, launch application
tell application "name of security app"
activate
-- do more stuff here like start capture
end tell
--Script 2, quit the application
tell application "name of security app"
quit
end tell
Save them both as scripts and then use iCal to make two repeating events. One to start the app and the other to stop it. Attach your scripts as event actions. Then sit back and let the iCal schedular the rest.

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

Starting and stopping applications via a Java-application on Windows/Unix

Hello,
I want to start java and other applications via a java application.
This java application should start several different applications on windows and
on unix systems and take care of their current state (e.g. running/not running).
For all applications to be started there are .sh-scripts for unix and .bat-scripts
for windows. In the scripts there could be a java call, e.g. "java someApplication",
or some executables could be called. These scripts set the applications' environment etc.
and start the application finally.
My java application calls these scripts via the ProcessBuilder API, which is working fine.
But there is the following problem: on windows, when executing a script that starts
some other application, the ProcessBuilder gives me process-handle to the started
process. If calling destroy() on this handle, only the cmd.exe gets killed which
started the application. The application itself is running on. This is undesired behaviour
since I want to be able to control the started applications, at least start and stop it which
is impossible that way.
On unix, it is working when using
"exec java someApplication"
instead of just
"java someApplication"
in the .sh-scripts. The exec command substitutes the shell process with the underlying
process started in the script, so everything is working as expected on unix.
But how could I get this working on windows systems? Is there any equivalent to the exec
command on unix? Any suggestions appreciated.
If something's unclear in my description, please let me know.

Yes - after looking at this option - I think that's the direction I am going to go. It probably makes sense to give my JMS topics and my BPEL server their own OC4J instances anyway - for a number of reasons.
Lon

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

GarageBand '11 - Create an iPhone ringtone - Apple Support

How Can I Start And Stop NSTimer..???

Hellllooo...
I Have a NSTimer. I want to Start and Stop NSTimer Menually ,,so how can i do????
-------THNKS---------

You are rather rude, Patel. wjosten was directing you to where you
are more likely to get an answer. We are only users here, and your
question seems to deal with programming which is handled in the
developers forum.
Good luck getting an answer with your attitude.

Can a Lightroom adjustment brush draw a straight line by clicking the start and stop points?

Can a Lightroom adjustment brush draw a straight line by clicking the start and stop points?

studioMac wrote:
I'm trying to selectively adust areas of an image in Lighroom. eg: a window frame in an architectural photo, and so being able to make straight lines with the adjustment brush would be very useful.
I agree it would be useful. It's something that's been asked for. The best thing is to keep requesting at the Lightroom feature request forum

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

Batch file to start and stop services

I've setup a CF Probe on my Development Server to ensure my
CF Production server is up and running (services = Apache and CF
Application Server). It checks the PROD login page and if it times
out in 30 sec the probe fails. I understand I can execute a file
(batch file with net start and net stop) but the problem is I need
to have the probe somehow point to the .bat file on the PROD server
and not on the local machine. How can I remotely access this batch
file and execute it? I don't know how to point to the file on the
other server... can anyone help?

Hi Ken,
You had pointed me in the right direction regarding the
psstools in order to create a batch file that can remotely start
and stop services.
i used the psexec command and am able to successfully restart
the services needed remotely... however when i pick the file in the
coldfusion administrator (in the probes section) how to i point to
the batch file to run? it seems like the probe is not running the
script like i want... the file is located on the c:\ so i entered
c:\test2.bat...
Thanks,
Matt
Matt,
You should review the online help in the cfadmin for probes
and the links it points you to in the developer's guide. Basically
you need to define a new probe in the cfadmin by clicking the
"Define New Probe" button. One of the probe's attributes will be
what action. Define the action as a program and point it at a batch
file running psexec. You will probably need to run CFMX as a
specific user and not as localsystem, which is the default.

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

How to create services start and stop automation script for diff servers

Hi All,
i want to create a bat file for automation purpose to start and stop services
i have some services in 1st server aand some in 2nd server and some in 3rd servers.
has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
Thanks in advance
Regards
SM

Hi,
this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
1. Databases for repositories.
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Foundation Services Managed Server application server, which includes Shared Services,
and EPM Workspace.
4. Reporting and Analysis Framework — Agent Service (if required for your environment)
5. Reporting and Analysis Framework Application Server (if required for your environment)
6. Web server
The remaining services and processes can be started in any order:
1. Performance Management Architect Services
2. Performance Management Architect application server
3. Performance Management Architect Data Synchronizer application server
4. Essbase Server
5. Administration Services application server
284 Starting and Stopping EPM System Products
6. Integration Services Server
7. Essbase Studio Server
8. Provider Services application server
9. Financial Reporting Services
10. Financial Reporting application server
11. Web Analysis application server
12. Calculation Manager application server
13. Planning application server and the Hyperion RMI Registry
14. Financial Management service
15. Financial Management Web application server
16. Strategic Finance service
17. Performance Scorecard application server
18. Performance Scorecard Alerter application server
19. Profitability and Cost Management application server
to start services on different servers you can use the sc command in your batch file
for eg
sc \\10.121.201.21 start HypS9FrameworkAgent

Batch file to start and stop

Hi All,
Can we create a batch file to start and stop the services. I need to start all the services like shared, essbase, eas, planning, webanlysis and financial reporting, and at also need to stop them using windows batch file.(Using windows 2003 server....service pack 1). Any help would be appreciated.
Thanks

Hi,
The simplest script would be something like this. Save it as a .bat file, set all your services to manual and then set up a scheduled task to run this script when the computer starts.
Gee
:: Startup Script for Hyperion Services ::
date/t >> startup.log
time/t >> startup.log
echo "Starting Hyperion Services" >> startup.log
net start "Hyperion S9 OpenLDAP" >> startup.log
net start "Hyperion S9 Shared Services" >> startup.log
:: Insert pause of 5 seconds to ensure HSS has finished starting
ping localhost -n 6 >nul
net start "Hyperion S9 BI+ Analytic Services 9.3.1 - Essbase" >> startup.log
net start "Hyperion S9 Administration Services ATS5" >> startup.log
net start "HyperionRMIRegistry" >> startup.log
net start "Hyperion S9 Planning" >> startup.log
net start "Hyperion S9 Provider Services ATS5" >> startup.log
net start "Hyperion S9 Apache 2.0" >> startup.log
net start "Hyperion S9 BI+ 9.3 Core Services 1" >> startup.log
:: Insert pause of 10 seconds to ensure Core has finished starting
ping localhost -n 11 >nul
net start "Hyperion S9 BI+ 9.3 Workspace" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Java RMI Registry" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Print Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Report Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Web application" >> startup.log
net start "Hyperion S9 BI+ 9.3 Web Analysis" >> startup.log
date/t >> startup.log
time/t >> startup.log
echo "Finished Starting Hyperion Services" >> startup.log
echo "###################################################################" >> startup.log

How to append data in same log after start and stop signal express

how can i append my data to the same log file after starting and stopping the signal express ? Is there some option to do this. After start/stop it always makes a new log file. How can append datat to the same log file.
Thanks in advance.
Munir

Hello mbhatti,
I founded a KB which seems do describe the way to solve your problem.
Appending Data to the Same File when Logging in LabVIEW SignalExpress :
http://digital.ni.com/public.nsf/allkb/C38AEE499D5CC8C6862572CF006875D2?OpenDocument
I hiope this will help you
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

HT1355 can an application start and stop airplane mode?

Similar Messages

Maybe you are looking for