HT1363 My 120 GB ipod classic has a white screen that I cant get off. What can I do to fix this problem
My 120 GB ipod classic has a white screen that I cant get off. What can I do to fix this problem
Hello onemeeks,
If your iPod is unresponsive, it may be best to run through the following troubleshooting assistant:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks,
Matt M.
Similar Messages
-
HT1572 my ipod touch has gone white screened and it doesnt do anything, what can i do ?
My ipod touch has gone blank with a white screen and it doesnt do anything, what do i do ??
Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My iPod touch has solid white screen, won't reset...what can i do?
I was checking my facebook and the screen went ****-eyed...when I tried to press the home key, nothing happened...pressed off button, nothing...tried reset (home and off for 10 seconds) screen went white...now what??
- Connect to computer and it iTunes ee the iPod restore.
- The try lettting the battery fully drain. After charging for an hour try the reset, and then the connect to computer and restore.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Hi i'm trying to restore my iPod classic and it says that the iPod could not be restored. An unknown error occurred (1434) what can i do to fix this? Thanks
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015 -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
my ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.
my ipod touch has the same problem. I restored it three times, but that can't help.
-
all of the apps on my ipod touch dont respond, or will stop working after a short period of time. ive had my ipod for less than a year and this has been a reaccuring issue for a while. what can i do to fix this problem?
Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, try a restore from an earlier backup in iTunes.
iTunes: Backing up, updating, and restoring iOS software
And lastly, restore to factory defaults in necessary.
B-rock -
So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?
First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted. -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I can start my iPod but it will only stay on the Apple icon screen for 5 minutes and then shuts off, what do I do to fix this problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.
Renew the subscription?
-
i was restoring my ipod when it got frozen on the conect to itunes screen. what can i do to fix this problem??
Karla...
Help here > iPod touch: Frozen and unresponsive -
My ipod classic has a white screen
my ipod classic has a white screen
Hi there dvdking,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
-Griff W. -
My macbook pro has become agonizingly slow, what can i do to fix this problem?
I have a macbook pro, ( os x 10.9.3, Processor 2.4 GHz Intel Core i7 Memory 4 GB 1333 MHz DDR3 Graphics Intel HD Graphics 3000 384 MB )
that has become agonizingly slow and unresponsive. there is always a several second response time after every mouse click and it can take several minutes for any and all websites to open. Even when I open my home page it can take a minute. Is there something I an do to fix this problem. I do have Bitdefender running but it did not seem to affect operations when I installed it several months ago. This is a relatively recent development and getting worse. Help!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. It will be slow, but should not be as slow as what you describe. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Error in BI Content 7.03 Import
Hi, i have installed BW 7.0 in unix machine. I am getting the follwoing error during BI content 7.03 import. Pls let me know whether , i have to import BI-content 7.01 before or i can import BI 7.03 directly I am facing error in XTA_put execution <b>
-
Is there a way to perform animation in Adobe Livecycle Designer?
Hi, I wanted to know whether its possible to perform animation in Adobe Livecycle Designer. If yes then HOW?? Also if there is a way to create time lag between subforms?? Thanks in Advance!!!!
-
Can I congfigure "bonjour" apps like iChat AV to work over a non-split VPN?
I have several mac users all connected into a single Cisco VPN 3000 concentrator using a non-split IPSec/UDP tunnel and we want to use iChat AV through bonjour instead of over the internet. If we can figue out how to do this, it should allow us to sh
-
How to convert varchar to int in MSSQL?
Hi, I am using mssql. how can i convert varchar to int type. for eg. id (int) txt(varchar) 1 ---------10 2 ---------10a 3 ---------10b i want to convert varchar to int. HOw? pls explain with query. Thanks edward
-
Facetime in imac pro not working after Lion...
After Lion, Facetime in my Mac Book Pro has not been working. It constantly states: The server encountered an error processing registration. Please try again later. And haven't been able to make it work. My id is ok, password is correct... HELP!