HT1363 Using iPod nano 7th gen with Bitlocker

Hi guys,
Quick question on using iPods on Windows machines that have Bitlocker enabled - how do i prevent the iPod from showing up as a removable drive? I have disabled disk usage in iTunes but no luck. The problem is that Bitlocker is trying to encrypt the iPod, which renders it unusable anywhere else
Strange thing is that the behaviour seems to vary between iPods, i have:
-iPod Classic 5th Gen - issues
-iPod Touch - no issues, works like a charm
-iPod Nano 7th Gen - issues
On the same machine my iPad 2 work without issues.
Thank you in advance for the help
Regards,

You would need to make a change in that software. Try for help on their website.

Similar Messages

Ipod nano 7th gen with remote control and with or witthout dock

Hello there!
First of all thank you for reading me
I need to use my ipod nano 7th generation with the remote control because I'm installing it in my new ballet school and it's very uncomfortable going every time near the stereo to control it. I've always connected the ipod with the cable, not with the dock and I was wondering: can I use the apple remote controller without the dock? if no, has the dock to be apple or is it the same? I've seen that the apple universal dock has the old connection (like iphone 4, just to understand) .. How can I connect my ipod 7th gen? is there any adapter or something coming with the dock?
Thank you very much,
Anna

Ok I've found out that the universal dock is no longer available and that, btw, is not working with ipod nano 7th.... how should I do then?

Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

There is currently no such antenna available.
B-rock

Use Ipod Nano 2nd gen with case

should i use my ipod with a case but i like the look of it better wtihout one. however, the case does protect it, but the nano is more resistant to scratches.. what should i do

i know the feeling of wantign to show off th ecolor of your ipod nano...i got a red one!!!:D
I right now got a silcone case which is temporary as i look for a good clear case. It would be super cool if people could post hard clear cases they find for the nano here in this post...i found this one...theres another super nice one but im loking for it
http://www.marware.com/cgi-bin/WebObjects/Marware.woa/7/wa/selectedCategory?cata logCatID=244&wosid=0hWjnDXhLlpDqv2o11yVSg
GFF:)

Ipod nano 7th GEN no audio out from head phones jack

I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
Thank you!

Can you provide a link to the monster product, or the model name/number? If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

IPod Nano 7th gen wont turn on after a restore

I tried holding down the top and middle buttons and it wont work, this is a replacement one for an iPod Nano 7th gen with corrupted software, could it be the same problem?
During the restore it says it's restored and not to disconnect my iPod but then can't seem to find it so it repeats the restore again and again
Starting to get really annoyed with it now

Hi Sherbetpips201,
If your iPod won't turn on, the following troubleshooting steps may be helpful.
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/TS1382
I hope this helps ....
- Judy

Am trying to sync my ipod nano 7th gen. i get this message: not enough access privileges."

i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
I have successfully done this in the past.
now I am getting a series of messages: "not enough access privileges"
have reset the nano and also downloaded latest iTunes software.
Any suggestions?

Hi,
I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
Thank you for reading this and any help would be greatly appreciated.
Best,
Dimitris.

Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11

IPod Nano 7th Gen won't connect with phone

I am trying to connect my Droid Razor HD with my iPod Nano 7th Gen using Bluetooth. My phone recognizes the connection, my iPod doesn't. States:
Mobile phone
Not Connected
What's going on?

The iPod Nano only has A2DP (stereo bluetooth) AVRCP (controls) and low power Bluetooth profiles. It does not have File Transfer Protocol (FTP) and cannot connect to your phone.

Using a Windows formatted iPod Nano (4th Gen) with Bootcamp on a Mac(Win XP

Hey I was wondering if anyone knows if you can use a previously formatted iPod Nano (4th Gen) with a Mac that has XP Bootcamped on to it. If the Nano is placed in manually manage music with the original computer it was formatted with, will it be able to accept music, movies, podcasts, etc from the windows on the Mac or will they still be incompatible?

Well, I have 4 internal drive bays filled already, is there room somewhere for 5th one in the box? I wasn't aware of it if there is?? My mac is MacPro3,1, early 2008.
That macsales.com link is interesting but I'm not in the US (I'm in Croatia), and all those brands are supidly expensive here, that $80 esata docking station is almost $200 here... bahh. For that price I may as well buy a whole new 3TB external disk, I want to dock the old one to save money.
I've browsed around and I've found Icy Box docks, which have much more reasonable prices:
BOX IB-110StUS2-B
ICY BOX IB-111StUS2-Wh
ICY BOX IB-115StUS2HC
They all claim to have OSX support... anyone have any experience with them?

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

Do I have to have an iTune account to use the Ipod Nano 7Th Gen?

Do I have to have an iTune account to use the Ipod Nano 7Th Gen?

No, you don't. You can rip music to your computer and sync it to your Nano.

Music keeps cutting out on my ipod nano 7th gen when using bluetooth

I just recently got an Ipod Nano 7th Gen and the music keeps cutting out when I use bluetooth headphones. It seems like it needs to have a line of sight or else the music will cut out. If I hold the ipod in my hands while running or keep it in my pocket, I am listening to more pauses than actual music. I practically have to hold the Ipod up to my head while running to not have it cut out on me (and that is obviously not comfortable). Is this how it should be or do I have a faulty Ipod? Is there some way that I can fix it or do I need to take it to the Apple store?

thankfully I was just able to find the answer in another member's post. You can double click the side button to advance the songs. I credit member little goomba for sharing the answer on another post. Now I am back to loving my new Nano!

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

What is up with the iPod nano 7th gen. I just had a second one die. with both after only 3 weeks of useage?

what is up with the iPod nano 7th gen. I just had a second one die. both after only 3 weeks of useage... both dead since Jan 10th 2013.

this is an answer I just gave to someone else.
i'm going to ask you to try something I just did to fix a maybe simular problem that worked..... but I don't know why yet........make sure your iPod in plugged into your computer (mine is a Mac) and iTunes is turned on. My iPod was also "dead" but had been plugged into my computer for a couple of hours (but not lit up in any way). Then (in desperation) I held down all the buttons, the on/off (on top right), the small Home botton at the bottom of the face, and the volume/pause buttons (left side). For whatever reasons my iPod came back to life in a needs restoring mode ....and asked me to restore it in the itunes like "new' iPod connected mode. Since I have a Mac I also had to give permission to do a download by entering my computer password. If you have to do the same have that password ready. Then it did a restore software download. Everything previously on the iPod was erased and had to be re-synced, but I was just thankful to get it up and restored again.
Give this a shot and I hope it works for you.....but why? I don't know yet, I need more questions answered.

HT1363 Using iPod nano 7th gen with Bitlocker

Similar Messages

Maybe you are looking for