HT1364 when I click on consolidate files I get a message that says "Copying files failed. The required file could not be found" what does this mean?
I've been encountering problems with this from the beginning, when I realized that my iTunes media folder was engulfing most of my storage. I bought an external drive, followed all the steps, and since then I've lost 1 movie and several songs, and now I've lost some magical file that means I can't move anything now. The files are still on my computer (I moved them back after losing the movie and songs) and I can't move the media files. It does create the folders for me all the way down to the artist and album BUT when I open that last folder it shows me NOTHING! please help this is incredibly frustrating.
1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary
Similar Messages
-
when syncing my ipad I get the message 'iTunes cannot sync apps to the iPad "..." because the apps installed on the ipad could not be determined'; what does this mean?
I'm pretty sure it's a bug in either iOS 6 or iTunes 10.7. I kept getting it until I quit iTunes and re-ran it again. I then started sync from the iPad itself.
-
My Iphone has a message Iphone disabled, connct to Itines. When I connect to Itunes I get a message "there is a passcode on your Iphone cannot connect.. Now what?
You have to put iPhone into Recovery Mode and Restore. Open iTunes on your computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.
-
I was syncing my iPod and got the message that an update was available. I downloaded the update and just as it was almost finished, I got an error message. It couldnt' update my iPod because the "firmware file is not compatible." What's up with this? I've never had any problems before with this iPod or with my iPhone 4S before this.
Update your iTunes to latest version.
Try restoring your phone in DFU Mode, if that doesn’t work then try downgrading your iTunes back to iTunes 8 and try again. -
How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.
I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it. -
When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes
Upgrade iTunes to the latest version. It should be 10.5.3.
-
When I start to download Firefox, I get a message that says "This type of file can harm your computer. Do yiu want to keep Firefox...p7.0.1.exe anyway? What does that mean and in what way can it harm my computer? Do I download it anyway?
You get that message any time you download an executable file. It is safe to open as long as you download from http://www.mozilla.org/en-US/firefox/new/
-
I keep getting an error message when syncing:
iphone cannot be synced. A duplicate file name was specified.
What does this mean? How do I fix it? Please help.any idea how to fix this
-
if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.
Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
When I try to sync I get a message that says "waiting for items the sync" then it just stays there and runs for as long as I keep it hooked up. Any ideas?
I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!
-
When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
I cannot get into my iTunes. When I try to load it, I get a message that says iTunes has stopped working. What do I do?i Have uninstalled and reinstalled both iTunes and Quicktime already, Did not make a change
You are on pc or mac? I think pc. Below is a link that gives the steps, and it suggests you need to down load a controller, and then it tells you how to set it up. See if this helps any.
http://www.gottabemobile.com/2011/10/12/icloud-photo-stream-on-windows-pc/
Within the write up is a link to the apple site where the download is available, for free! -
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
I had a month long trial of Lightroom and I decided to purchase a prepaid 12month Lightroom/Creative Cloud license. When I uninstall Lightroom and then reinstall it, I get a message that says trial ended with the option to 'buy'. How do I install the purchased year long license to my desktop or add a license number? Also wondering where I might find this number?
ThanksPlease try to perform the steps mentioned on below links
Sign out, Sign in | Creative Cloud Desktop app
Sign in, activation, or connection errors | CS5.5 and later
Maybe you are looking for
-
URL not found error while loading photo on Linux
Hi, I have a AIR 2.0 appliaction which works perfectly well on Windows but while I run it on Linux Loader object can't load any photo. I tried many path variations but I always get Error #2035: URL Not Found. Here's how I load a photo (with hard code
-
Cannot open attachments in earthlink webmail
I can't open any of my attachments when using my earthlink webmail in firefox. I have used it now for a couple of years with no problem. I can still open them in internet explorer so its something with firefox. What can I do?
-
I have a macbook the aprostrophe keeps filling in data fields
i have a macbook. In safari, word, excel, and help, the aprostrophe keeps being repeated in the data fields. I have cleaned the keyboards. Would the face cover need to be replaced? Is this a motherboard issue? Thanks
-
From: text overlapping Subject: text in Mail
I'm having a display issue in Mail app: text in the From: line is offset to the point that it completely overlaps the Subject: line, leaving the From: line empty, and the Subject: line garbled with two lines of text superimposed. It's like the baseli
-
MB_DOCUMENT_BADI not triggring in ECC 6.0 version
Hi All, We are upgrading our SAP R3 from 4.6c to ECC 6.0. In the new system, Transaction SE18 now has two options 1. Enhancement spot 2. BAdI Name When I display my BADI MB_DOCUMENT_BADI Attributes tab shows BAdI migrates to enhancement spot MB_GOODS