HT1366 What size are the two audio ports on an older model MacBook, not MBP?

What size are the two audio ports on an older model MacBook, not MBP?

How come if I plug one of my two jacks on a headset it seems loose.  i know the single jack is supposed to be the same size, but it doesn't seem the same.
If I get the two jacks to one jack adaptor, both ends 3.5mm is that correct?

Similar Messages

  • Are the two USB3 ports on a Mac Book Pro independent channels of USB?

    Are the two USB3 ports on a 15" 2012 Mac Book Pro independent channels of USB? If I plug a USB2 device into one of the ports, does it slow the other as well?
    Thanks
    MtD

    Thanks - according to this Apple KB article:
    http://support.apple.com/kb/ht5172
    plugging in a USB 2 device into the USB3 daisy chain slows all devices on that chain to USB2 speed.
    What I am trying to find out is if the two ports on the side of the MacBook Pro are independent channels of USB, so that you could operate with a USB2 device on one port and still obtain USB 3 speeds (with USB3 only devices plugged in) on the second port.
    MtD
    Message was edited by: Meg The Dog to fix typo

  • Anybody know what size are the screw's to keep place the Airport card?

    Hi Folk's
    Anybody know what size are the screw's to keep place the Airport card? as I got a card here that I've had sitting around and now I've set up wireless network that reach out to where my Mac Pro is located but I don't have any screw that fit arrgh !
    TTFN
    Subcoustic

    Hi,
    I purchased an Apple MB988ZM/A Airport Extreme Wireless Upgrade Kit for my 2.93GHz 8-Core 2009 Nehalem Mac Pro a couple of months ago.
    The kit includes 2 screws inside a transparent pack. The description on the pack reads:
    "HH111009 603-9823-A Assembly Screws China".
    The screws are approximately 4.5mm in overall length, of which about 3mm is the thread.
    The thread appears to be fine, and the round head of the screw takes a Philips 00 screwdriver tip.
    I have checked one of the screws with my "screw gauge" (I am a very keen DIYer!), and its diameter measures 1.5mm.
    Hope this helps.
    Regards,
    Bill

  • HT5534 What size is the download ? - my router is limited and could not download IOS6

    What size is the i work update 9.3?

    A few hundred Mb, not sure exactly, just let it run.
    It will get there eventually or else go hang off someone else's free WiFi.
    An AppleStore is good.
    Peter
    PS Just noticed you are talking to cross purposes. Are you after the iOS version or the Mac OSX version?

  • Why are the two firewire ports on the back of my iMac diffferent?

    I currently have an external hard drive plugged in to one firewire port. But I noticed that I cannot fit my iPod connector into the other firewire port.
    Why?
    Intel-Based iMac 24" Mac OS X (10.4.10)

    Look at this article iMac (Late 2006): External Ports and Connectors and go down to:
    "Two FireWire Ports"
    The iMac (24-inch) has one FireWire 400 port, and one FireWire 800 (IEEE 1394b) port, which supports transfer rates of 100, 200, 400, and 800 Mbps as a theoretical maximum load; actual rates may vary.
    If your External HD has a second firewire port on it, connect the firewire iPod there. If not I would pick-up a firewire hub to prevent having to plug and unplug cords.
    Dennis
    17" iMac Intel Core Duo - 1.5GB Ram -   Mac OS X (10.4.10)   - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

  • What size are plugs on SoundBlaster? Mic + Line In Mono or Stereo?

    What size are the plugs on a Sound Blaster?
    Are the Line-In and Mic Inputs mono or stereo?

    H
    TomBrooklyn wrote:
    What size are the plugs on a Sound Blaster?
    The audio sockets used on the slot cover of Sound Blaster cards accept (/8-inch) miniplugs.
    Are the Line-In and Mic Inputs mono or stereo?
    Line-In is stereo. Mic-In is mono.
    -Dave
    ?[email protected]

  • What are the two different rules for organizational data determination

    What are the two different rules for organizational data determination???

    Hi
    1) Rule type Responsibilities
    want to determine organizational data for individual responsibilities
    have not created an organizational model but want to create one
    have a lot of organizational units and must only assign a few attributes
    2) Rule type Organizational Model
    You would use rule resolution using organizational model if you
    have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
    assign a lot of attributes to the organizational units and these are to be evaluated
    Regards
    Manohar

  • What are the two XSLT tags, previously that could not be used in XI?

    What are the two XSLT tags, previously that could not be used in XI?

    Dear Niladri,
    sorry I missed your question a little bit... my answer was about the XSD barriers.
    About XSLT, it's the format-number() and unparsed-entity-uri() functions which are not supported.
    Best regards,
    Andras

  • What are the two options of entering PLAN DATA?

    Dear SAP Gurus
    What are the two options of entering PLAN DATA?
    AA

    Dear Friend AA
    Such two options are :- FORM BASED ENTRY & FREE ENTRY.
    FORM BASED ENTRY-Here you fill in th eplan data in the rows corresponding to the characteristic values displayed on the screen.But in free entry you have the freedom of inputting even the chrcteristic values.
    Regards
    Vivek

  • What standards are  the USB ports on a Dual 2.3 GHz PowerPC G5?

    What standards are the USB ports on a Dual 2.3 GHz PowerPC G5? USB1 or USB2? If USB1, is there a card to equip the computer for USB2 or USB3?

    USB 2.0. USB 3.0 is not yet supported in OS X. You can purchase USB 3.0 cards for Macs, but I don't know if they work in your slots. See www.caldigit.com, for example.
    Message was edited by: Kappy

  • What are the two mystery apps?

    With my iPhone connected to my Macbook, under the apps tab (for my iPhone) - the top right says that I have 169 apps.  However, when I count them I have 167.  In addition, the apps tab (in the left of my iTunes for my Macbook) - the bottom says that I indeed have 167 apps.
    What are the two mystery apps?

    Is it possible that you have an iPhone version and an iPad version of the same app?
    MJ

  • What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

    I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
    Here's my system:
    SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
    As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
    What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

    ...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement  as  CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
    However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

  • Where can i find the "use audio port for" button?

    I am a Dj and am trying to record. All instructions I have seen, it says to plug my mixer into the line-in input and go to system preferences>sound>input, then change the "use audio port for" option to "sound input". I am not able to do find the "use audio port for" drop down menu, any help??? I have a MacBook Pro that is about six months old and I am running OS X 10 9 4.

    King_Penguin wrote:
    What are hoping to achieve via Bluetooth ? On iOS devices it's mainly for headphones and keyboards, not, for example, for copying content between the devices : supported profiles
    I was actually hoping to use my computer as a DHCP. I am in Iraq and have a very hard time getting a solid connection. However my computer has no issues. I am usualy able to use Safari but can not get to iMessage or Facetime servers. I have Windows 7 64bit a bluetooth compatibility. Not looking for any file transfers or special stuff. Just a ICS set up.

  • HT203167 I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

    I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

    Did you copy your actual iTunes content from your computer before reinstalling iTunes, or did you just copy your iTunes library which only contains the pointers to your songs / books locations ?
    You might, depending upon your country and if they are still in your country's store, be able to redownload your music purchases and your ibooks via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage - you will need to delete the entries from your library (where you are getting the 'unable to locate' messages) before they will potentially show with the cloud icon against them in Purchased for redownloading.
    Or copy them from your backup of your downloads/library and add them to your iTunes library via File > Add To Library

  • Just downloaded DW CC. Bought expensive book that tells me to use "Expanded Workspace" but the only options I see in window or workspace button are "Design" Extract" and one other. No where can I find "Expand" or "Compact" which the books says are the two

    Just downloaded DW CC. Bought expensive book that tells me to use "Expanded Workspace" but the only options I see in window or workspace button are "Design" Extract" and one other. No where can I find "Expand" or "Compact" which the books says are the two choices.

    Glad to be of help .
    I won't be spending any more money on expensive books now that I know you can't actually get one that applies to the latest version.
    Don't get me wrong.  I like books.  Classroom in a Book series is an excellent resource to have.  You will learn a lot from it.  Just don't get side-stepped by Creative Cloud's update schedule.  No publishing house can keep pace with it.   If you stay informed about new releases from Adobe's "What's New" Blogs, you will get your money's worth out of your books.   Online Help (F1) is another good resource to use since it is updated fairly often.
    Nancy O.

Maybe you are looking for

  • How to pass variable to data tab which replace text in Word attachment

    Dear ABAP folks, I use METHOD cl_gui_frontend_services=>gui_upload to upload my word doc in BINARY and sucessful sent this word doc as attachment with Thomas Jung's FUNCTION 'Z_E_KEG_SEND_SIMPLE_EMAIL'. However, inside the word file, i need insert va

  • Changing look and feel with radio buttons

    k this is the code that i have so far, Yes i read the tutorial and stuff but it doesnt seem to make any sense and all. tell me what else i need in this code to do what i want, its the action performed part i didnt put the other code, what else do i n

  • How to delete task in serviceorder with release ECC6

    we just migrated to ECC6 from 4.7 but now I got a strange problem when a user wants to delete a task from a serviceorder. it gives a yellow warning saying that I get a warning before delete. I press enter I select Yes and then I get a shortdump A RAI

  • Mac Word 2008, 2011

    Hi All, When I insert a web page hyperlink and click on it I receive the following message: unable to open http://www.google.com. cannot download the information you requested. I have tried this at home and it works fine. We have a proxy here at work

  • Where and How do I get the documentation for BADI --- HRWPC_PCR_APPR_NEXT

    Hi,          Could anyone plz help me out in finding the documentation for the          BADI --> HRWPC_PCR_APPR_NEXT. Thanks & Regards, Deepak