HT1369 my Ipad is disabled and is saying connect to Itunes, but the PC is asking me to submit the pas code... I'm stuck
Hi,
My ipad is disabled and is asking me to connect to itunes. Itunes won't allow me to connect to it, and is asking me to insert the passcode to the device....
See iPhone DFU mode explained, and how to enter DFU mode.
Similar Messages
-
ipad is disabled and i had connect to itunes. but when i connected to my computer, its not sinc automatically , still ask me to enter the pascode first. so how can i restore my ipad ? seems my laptop didnt know or never get sinc with my ipad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
hi, i have a problems. my iphone is being disable after my daughter play with it and been entering all the wrong code. so my iphone is now disable and it say connect to itunes. i already plug my iphone to my computer, how ever my computer could not detact my devic. and because of that i cant connect it to my itunes. how do i deal with this problems?
iOS: Device not recognized in iTunes for Windows
-
My little sister kept typing in the wrong pass code for my ipod touch and now its disabled, and says connect to itunes but i can't unless i'm on my ipod. so please comment helpful solutions!!!!
http://support.apple.com/kb/ht1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
my ipod touch is disabled because i forgot my passcode i syncd it to itunes and now it says to enter a passcode but i dont have one.
You should be able to reset it and then put everything back from a backup in iTunes (one you hopefully got).
If you can't, I guess you could put it in DFU mode and try again...
Good luck! -
My ipad mini was disabled and kept saying connect to itunes how do i do that
my ipad mini was disabled and kept saying connect to itunes how do i do that
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have locked my iPhone 5 and forgot my password . Phone is disabled and is saying connect to iTunes ! I have tried but never did I synced my phone to any computer but when installed used iCloud how do I get it back on???
See here
http://support.apple.com/kb/HT1212 -
My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
You'll probably lose all your data -
my iphone 4 is disable and it says connect to iTunes so I connect it to iTunes and nothing happens I have done this a couple of times and it is really ******* me off and I need help
when I connect the USB plug into the computer it tells me iphone is in recovery mode you need to unlock before connecting to iTunes then when it say restore and update it does it for like 10-15 min then it turns on the phone then I have to do it all over again
-
My iPod is disabled and it says connect to iTunes. The only way i found to fix it is to restore it but i don't want to loose all my data. What should i do?
You must restore it, losing anything you have failed to backup or store on your computer or cloud service.
-
Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
Firstly, i reset my computer few days ago and never used itunes after that .
Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
iphone doesn't respond at all .
I need some help .... i tried everything i could do ..Hey jinyoung_20,
Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
My ipod was recently disabled and now says "connect to iTunes" although my ipod has never been synced to my Mac laptop it will not allow me to. I need help.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup (if you have an iCloud backup) see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Here is the order of what I did to my iPad:
1. A restrictions passcode was put on and we couldn't remember it. Despite numerous attempts at righting this, I couldn't. The iPad would not sync with any iTunes on any computer, Mac or PC.
2. I put a, 'use passcode after one minute' passcode on it and deliberately put in 10 wrong passcodes so it would disable the iPad. Now it still will not connect to any iTunes.
3. I connected to my iCloud account and removed the iPad from the cloud; it says it will erase all iPad data when it connects to the internet. I am fine with that, I need to know what to do now, though. iPad says, 'Connect to iTunes,' but it won't. Please help this amateur of all amateurs!!See iPhone DFU mode explained, and how to enter DFU mode.
-
I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?
If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Is it a bug about element's depth?
I have two elements in one frame and if I use: alert(fl.getDocumentDOM().getTimeline().layers[1].frames[2].elements[0].depth); alert(fl.getDocumentDOM().getTimeline().layers[1].frames[2].elements[1].depth); It shows me 0 and 1, It is all right! But i
-
Fireworks CS4 PC version won't recognize my .ase file.
I can download my kuler swatches as an .ase file without problems. But when I go to Fireworks, I can't load the file into the Swatches palette. I tried "Add swatches" and "Replace swatches" in Fireworks, but Fireworks will only allow me to look for a
-
How to find duplicate images?
How do I use Bridge CS5 to find duplicate images and delete them?
-
How do I transfer my iTunes to my new iPhone?
How do I transfer my iTunes to my new iPhone?
-
I'm new to SCSM. I have an environment setup that's importing Configuration Item data from Active Directory and SCCM. Is there a way within a Configuration Item to see what Class it belongs to? Or can I perform a search based off of a CI Class? O