HT1379 My Macbook Pro will not start at all. I automatically get the Apple Icon and a pinwheel that keeps clocking. How do I fix?

If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Similar Messages

  • My MacBook Pro will not start at all., My MacBook Pro will not start at all.

    The only previous problem was a few days ago the colors on my display looked a little off/fuzzy. I immediately restarted and the problem didn't return. Then today, I had it shut but when I opened it it was off and will not start again. It sounds like it's on as there's a slight fan noise, also the charge lights go up to fully charged. But there is no noise or anything when I try to start it.
    I'm not sure  if this is a coincidence, butt I started using a new charger today. It was second hand but the same one as before.
    It was purchased in early 2012, not sure what OS.  Any help is appreciated!

    Reset PRAM. http://support.apple.com/kb/ph14222
    Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Test with another charger. If this does not help, contact Apple.
    Best.

  • My mac book pro won't start...its stuck on the apple icon and a rotating circle when i start my computer

    My mac book pro wont start....its stuck on the apple icon with a rotating circle below

    See this Apple note on steps to take to deal with the rotating circle on startup.

  • I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

    i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

  • My MacBook Pro will not start up.  I only get a grey screen with the spinning wheel.  No blue page appears and the grey screen remains.  Tried starting with the Shift key but ineffective as well.

    Can't get my MacBook Pro to start up.  Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon.  Apple Support online suggested starting with power button followed immediately with the shift key.  Same results.  Also tried power button with shift key, command, and V.  Black screen appeared instead with lots of data language but still no starting.  This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here?  Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

    You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
    ...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
    If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
    Clinton

  • My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

    My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

    What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
    Clinton

  • My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

    My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

  • My MacBook Pro will not start up after entering correct password.

    My MacBook Pro will not start up after entering password.  Circle with an X in it and 'cancel' below it is on bottom of screen.  When clicking on cancel, nothing happens.  This just started last night.  

    Hi MJTOOTS,
    Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    You may also want to see if any of your Login Items are causing an issue.
    OS X Mavericks: Open items automatically when you log in
    http://support.apple.com/kb/PH14173
    Thank you for visiting Apple Support Communities.
    Nubz

  • After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

    After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

    Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

  • MacBook pro, will not start up- drive begins

    MacBook pro, will not start up- drive begins?

    OK, then try this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Since you can boot into safe mode successfully, I'm assuming the problem may be with a bad third-party extension or plug-in (such as a driver for third-party hardware or a bad Flash plug-in, for example.) It can also be a problem with a bad cache or preference file. If the above doesn't help then use a utility like Lion Cache Cleaner 6.0.5, Cocktail, TinkerTool Sys..., or OnyX to clean out user, system, and font caches.

  • My MacBook Pro will not start up - it was just on last night - what do I do?

    My MacBook Pro will not start up. I used it last night and it was fine.  What should I do?

    Try a SMC reset.
    http://support.apple.com/en-us/HT201295
    Do you get anywhere in the startup sequence?
    Ciao.

  • My macbook pro will not start up. stuck on grey loading screen and spinning dial. HELP

    my macbook pro will not start up. stuck on grey loading screen and spinning dial. i shut it down last night and now when i try to turn it on it will not get past this page. lights and sounds work but nothing happens. please help

    Power it down by holding the power button down. Then try to power it up again. Post back. It would help if we knew what OS you are running, the model MBP...

  • My macbook pro will not start up or turn on.  any suggestions?

    My macbook pro will not start up or turn on.  Any suggestions?

    I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.

  • Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"

    Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"
    Is it a hardware problem or a software problem?
    Any help solving this would be appreciated

    Hello M1ckyD,
    The article linked below details a number of troubleshooting steps that can help resolve issues with your Mac's Optical Drive.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Cheers,
    Allen

  • My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter.  You will have a window with the users to choose from to reset the password.  Select the one you want and you will be able to reset the password, double entry of course.

Maybe you are looking for