HT1379 when i am inserting the disk in to my computer it says this dick is nor redable by this computer
when i am inserting the disk in to my computer it says this dick is nor redable by this computer
What disk are you trying to insert and from where did you purchase it. It could be a pirate disk or not meant for Macs.
Similar Messages
-
I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it starts, but when its about 1/4 of the way done the computer restarts and my disk spits back out. When I look to see if it installed it still says 10.5.8. Is there something I'm doing wrong?
Model Name: iMac
Model Identifier: iMac6.1
Processor Name: Intel Core 2 Duo
I bought the Mac OS X Snow Leopard Install DVD from the Apple Store. -
I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?
http://support.apple.com/kb/TS2986
-
I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?
It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361 -
I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard, what can i do, as i have just paid out money for something which
Worked like a charm and resolved my problem totally. The only issue I had is that, unlike the Computer (Mac OS). the iPad doesn't give constant visibility to what it is doing (feedback), so I wasn't initially sure it had done anything.
When I opened my emailed message with .vcf file attached, and tapped the .vcf attachment icon, I saw activity on the icon for just a few seconds, then it reverted to the original with nothing apparently happening. After about 30 seconds, the secondary menut popped up indicating the transfer of 1200 addresses would be completed, if I approved the action. Another 10 to 15 seconds then transpired before the completed Contact list appeared on the ipad. So you must be patient, if you have a large Addressbook. That's reasonable,but unexpected lack of feedback left me wondering, like so many other things on the iPad.
THank you for the assist. Apparently Apples Mac Genius people did not know this procedure, and I will pass it on to my local Apple Store Instructor.
-- Chuck -
I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon on the desktop it takes me to an information page that gives no information about opening Elements 13. How do I open the software so that it can be used?
Unfortunately, when I open applications, adobe photoshop elements 13 folder does not appear in the adobe folder. It appears as a disk on the desktop, only.
-
I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.
Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it -
Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar? -
I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated
Is the store that you bought it from close so that you could try going back to them and ask them to activate the card properly ? If not then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?
When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)
-
I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.
I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.
-
I purchased a tv series and downloaded the first episode, when I went to download the next episode a message popped up saying "this computer is already associated with an apple id.....You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 41 days" and won't let me download the rest of the shows even though I haven't changed accounts and I'm using the same account I purchased the shows with.
It's been months, so you may not care anymore, but you can't download songs from multiple Apple IDs over a 90 days period. Sorry, it's not allowed for legal reasons.
-
When I try to drag a song to my shuffle it says " this song is in iCloud and can't be transfered. Why is it ? I never downloaded anything like iCloud. I just want to be able to move my music where and when I waNT TO. i HAVE BEEN UNTILL i DOWNLOADED NEWEST VERSION OF ItUNES. gET ME OUT OF THIS!!!
thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM -
I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."
This might help restart it http://support.apple.com/kb/TS1567
-
I got my cousin's old I-Pod as a gift, but when I hook up the I-Pod to my computer using the USB so I can put music on it, it doesn't register as being plugged in. What should I do? I also cannot figure out how to change who's I-Pod it is. Can anyone help me out?
- I would try resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
and then try restoring it. This probably will not work but is worth a try.
- Next I would disconnect the iPod from the computer and let the battery fully drain. When drained, charge it for at least an hour then:
-- Try resetting it as above and see if iTunes will see the iPod. If it does, then restore the iPod.
-- If not in iTunes try placing the iPod in recovery mode to see if that make the iPod visible in iTunes. If it does then restore via iTunes
-- Last, place in DFU mode to see if that makes the iPod visible. If it does then restore via iTunes.
Maybe you are looking for
-
Hey all, I am building a glyph font in Illustrator CS6. The problem here deals with a large number of assets, all of which need SVG exports at 32x32px (due to a strict grid definitions) for import and compiling purposes (assets need to be sequential
-
IPhone playing songs other than what I click on
I edited a playlist on itunes and synched it. All the new songs are there. But...when I click on one to play it the song it flashes on the screen for a second then it plays another song. Specifically - it decides to play the song that's 2 above it on
-
Wifi problem on my macbook air 2013
Hey I m when I connect to my WiFi it stays for sometime n stop I have to restart it for reconnecting it plzz help.me
-
Svn support in Oracle BPM 10.3 Studio
I am trying to use the SVN support of the Studio, but for some reason, neither of the the SVN Interface happen to be installed. In the menu, in Window > Preferences > Team > SVN the SVN inteface client appears: SVNKit (Pure Java) Not Available JavaHL
-
I cannot think of a way to be more specific..................Every time I bring up FF 4, I get the dialogue that FF is checking my add-ons for compatibility and then brings up the "step 1 and step 2" get acquainted bit. As a long time FF use, I do no