HT1384 ipod touch 3rd generation not work not charging

i need to know how it will work again the ipod touch 3rd generation

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

    Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

    Try here:
    iPod touch: Hardware troubleshooting

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

    Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • Ipod touch 3rd generation can´t install apps

    I have a problem with apple.
    I bought a Ipod touch of the 3rd generation and I can´t install any apps the problem is that my ipod said You need ios 6 to install this app.I bought them in 2010.
    How can I fix this problem? I have ios 5.1.1.I would be okay that apple update my ipod to the version 8 of ios.
    I think that is a case of programmed obsolescence.
    I am very angry. I think that bought an ipod with only 5 years of use and then happens this. I find it amazing.
    Regards
    JhonnyGarcia

    Thank you for using the Apple Support Communities
    Unfortunately that is the case with any kind of technology. Components get older and new software is designed to take advantage of current day technologies. The iPod touch 3rd generation is 6 years old which is a very long time in the age of technology. This may seem like a cop out answer but this iPod touch just could not handle current day software. Lets put it in perspective. If Apple updated that iPod touch to iOS 8.x then it would not have the power to handle even the simplest of operations. The iPod touch 3rd generation still works with iOS 5.x and allows you to use it as you did 6 years ago. Applications also get updated as well to support the newer technologies and with that they drop support for older hardware. Apps that had versions on the App Store that at some point in time supported your iPod, it will give you the option to install the older version. I am not saying Apple does not have planned obsolescence, what I am saying is that your iPod still functions because it does not use new software.
    -Zeph

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • The backlight on my ipod touch 3rd generation will not come on, but everything works perfectly. I even used the advice given on the tech support page, and it still will not come on. HELP ME PLEASE.

    The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions?

    Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions

    What happens when you try to restore? Error message?

  • Safari and mail app not working on my iPod Touch 3rd generation.

    I have an iPod touch 3rd generation and my safari and mail app won't work and it's driving me crazy! My safari app keeps crashing when I open it so that's not working, and my mail app opens up but doesnt load then crashes. Can somebody tell what to do?!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • The screen on my ipod touch 3rd generation will not respond to touch, it will not work at all.

    My ipod touch 3rd generation fell off of a chair, it worked ok fow a while then the bottom half of the screen would not work, now the entire screen is not working
    I'm not sure what to do.

    You can try the following to rule out a software probem:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to  factory defaults/new iPod
    If you still have the problem they yu very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPod Touch 3rd generation not recognized in iTunes

    I just recently upgraded my Macbook software to version 10.6.3 because I purchased an iPod shuffle and the newest version of iTunes would not install with my old software. Now my iPod Touch 3rd generation is not being recognized by the newest version of iTunes (10.2). I have already restarted my computer, and shut it down and removed the battery for a minute before starting it up again. None of these things worked. This is the first time I have tried to sync my iPod touch since installing the new software so I am not sure what I need to do.

    It sounds like this may be the fix:
    http://support.apple.com/kb/TS3540
    (Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

  • Ipod touch 3rd generation is not charging in Bose Docking station. How to solve this problem ?

    My ipod touch 3rd generation is not charging in the Bose Docking station (manufactured 2005). How to solve this problem ? SOftware required or hardware adapter required ? Thanx

    - Is the iPod fully seated in the dock?
    - Does Bose say the dock is compatible with your model iPod and it iOS.
    - Did it every work?
    - Some users have reported that their iPod did not fully work with their dock after updating the iOS on the iPod.
    There or no setting for docks.

  • IPod Touch 3rd generation is not turning on and gets really hot when I plug it in but is not charging...

    I have an iPod Touch 3rd generation and yesterday I was using it and noticed that it reset to a different time zone and when I dug a little deeper realized that it reset the date to December of 1969. I just went in and changed it all back. I was out of the house all day today and didn't take it with me, when I went to use it, it wouldn't turn on. I assumed it was dead, so I plugged it in and got ready for bed. I realized that the charging screen never appeared and it never made the little noise it does when you plug it in. I picked it up and right near where the charger plugs in, it was very hot. I use it when it'd plugged in from time to time and it is NEVER that hot. I then tried to plug it into the computer where it again didn't do anything and didn't show up as a device that was plugged in on my iTunes. Again, it got very hot very quickly. I am using the cord that came with it and an actual Apple brand wall charger. I don't know what else to do. Some people said to hold the two buttons down for a little bit, but nothing happened on mine. Please help!

    Warm is normal, too hot to handle, literally, is not.
    If you're concerned, make an appointment at your local apple store and have them check your charger out.

  • Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

    Itunes for Windows and PC will not recognize my ipod touch 3rd generation.  Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled.  I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

    the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

  • Hiya, my ipod touch 4th generation cameras are not working.

    Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine.  I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem  is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
    For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

  • IPod touch 4th generation, home button not working at all, Help?

    IPod touch 4th Generation , home button not working at all, Help?

    - Try restoring your iPod to rule out a software problem.
    - The try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    iPad 2 home button fail: Apple Support Communities
    You can turn one Assistive Touch in Settings>General Accessibility to use the screen instead. See chapter 30 of the users guide
    iPod touch User Guide (For iOS 5.0 Software)
    If under warranty make an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • X1 20A7 Win8.1 Pro - touch screen not working

    Hi, just got my new X1 Carbon TS (i7 4450U, 8Gbyte) with Windows 8.1Pro. Unfortunatly I cannot get the touch running and ran out of ideas. I have searched all the forums but could not find a solution. The only workaround that works is the one  to rem

  • Workstation is not authenticated.

    At first, let me apologize for not good in English. Ok? i look at the RMagent log and it show this sentence. So that makes me unable to remote any clients in my network. Please help. Ps. The server is established behind FW. I don't know it caused by

  • DataGrid Header Problem

    Dear All, I have some problem with accessing DataGrid HeaderText, When one column is visable false. "Click on column content and the code will show col # and header name. Do the same After Hide Colun  is clicked" Please check the following code <?xml

  • Re-config of ssh fails after changing Oracle Home while installing RAC

    Hi, Red Hat Linux 5 Oracle 10.2.0.1 RAC installation While installing Oracle RAC under ORACLE user we are Configuring ssh for the first time works fine. If any changes done (Eg: i changed the home path of oracle user), then the ssh configuration will

  • User exit  vs customer exit

    Hi experts , i am confusing user exit and customer exit plz give good diffrence and where we use these exits thanks and advance