HT1386 After installing iTunes 11.1.5.5 on Windows 8.1, I can no longer connect the iPod Touch or iPad Mini.
After Upgrading iTunes to 11.1.5.5 on Windows 8.1, I can no longer coonect with USB my iPod Touch or my iPad Mini. Is there something I can do to fix this or should I wait for a new release of iTunes to fix this problem?
Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2
Similar Messages
-
After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
When trying to install the downloaded itunes 11.1.3 on my pc I try to "run as administrator" but nothing happens. I've downloaded the software again, tried again, same result. I need to update to 11.1.3 on my pc (windows 8) so that I can sync contacts from iPad to Outlook. Can anyone help?
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Error message 310 is happening on my mac book and I am unable to set up my new itouch.
If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.) -
ITunes not showing songs that are on the iPod Touch
I have an iPod Touch 4th Generation.
I use iTunes 11.0.
I usually connect my iPod Touch to iTunes and play songs from there because I do not put songs in my itunes library.
I was doing this as usual and today when I connected my iPod Touch to iTunes, songs did not show up on the music tab of "On This iPod".
Just the previous day, I opened iTunes and there were all my songs.
Today, iTunes does not show any of my downloaded songs that were not bought from the iTunes Store.
The iTunes Capacity Bar shows that I have songs on my iPod Touch.
But when clicking on the iPod and going under the music tab in "On This iPod", there is no music other than a few songs, which were purchased from the iTunes Store itself.
I also tried third party software just today to check if I can get the songs off my iPod.
I tried using SharePod and it did not detect any songs, not even the purchased songs from iTunes.
There are songs on the iPod Touch only. I can play all the songs from the iPod Touch just fine.
They are simply just not showing up on iTunes.
How do I get iTunes to show the songs on my iPod Touch? The capacity bar says there are songs.
I tried SharePod a few times long before this happened, and it showed the songs on the iPod Touch.
I don't understand why all of a sudden the songs all disappeared from iTunes itself only.
(I would say this is similar to other issues where iTunes DOES show songs while the iPod itself DOES NOT. Mine is the opposite.)
Thank you for the help in advance.
Message was edited by: j_leongg
I tried backing up the iPod Touch.
Now all the songs on the iPod Touch (except for the purchased ones) are turned to blank names and are skipped.
There is no name for each song or artwork, they all are called 'unknown'.
Only the purchased songs are left unharmed. Everything else is corrupted now.SOLUTION: Some Music Won't Play After Upgrading Your iPhone To iOS7
Red square in red circle cannot play songs
My iPod isn't playing certain songs. Help? -
My itunes library has gone and is empty following a laptop rebuild. I do have my iPod which is up to date with music, photos, apps etc - can I transfer from the iPod Touch to the library or will the iPod lose all its data if I sync to the laptop? PLEASE HELP!
I'm guessing you've got iPod touch 2nd generation
iPod touch 2nd generation only goes up to 4.2.1, so you'll need a newer generation...
iPod touch 3rd generation only goes up to 5.1.1
4th and 5th generation both go up to iOS 6.1.3, wich is the current latest version.
Hope this helps
Stijn -
after instaling itunes 10.5 i cant open itunes , my pc says its an error . . what do i do ?
In order to download iTunes 10.7, which requires OS X 10.6.8, you have to buy OS X 10.6. It's available from the online Apple store, in the US by calling 800-MY-APPLE, or online here. After OS X 10.6 installation, run Software Update until there are no more updates available, at which point you'll be at OS X 10.6.8 and can install iTunes 10.7.
-
How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!
Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David -
Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !
See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2 -
After inc with my ipad Shuffle.nstalling WIndows 8 (I had to reformat C:), iTunes will no longer sync with my ipod shuffle.
I had to deauthorize itunes before installing Windows 8, and then reauthorized it after reinstalling it. It syncs with my new Phone 5 but not with my old shuffle.
It acts like it thinks this is a different computer. It says I have authorized tunes on 2 computers.
Note: Computer sees shuffle as a disk and device but will not sync with it.You have to restore the iPod via iTunes and then sync. The iPod is seeing the reformatted computer as a new iTunes library and you can only sync with one iTunes library.
BTW you posted in the iPod touch forum. -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX
Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks
Any one or a combo may help
Give your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
Try a different USB cord
Try a different USB port
Try rebooting your computer
Try closing/opening iTunes.
If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again -
IPhone is no more visibile in My Computer after installing iTunes 8
Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
Has someone else experienced my problem? Thanks in advance!im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
i have no pics downloaded from emails (as i researched this before)
the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
HELP!
FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed. -
After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed. Attempting to open the iTunes folder location locks up the computer and requires a cold reboot to restore.
Hello, LoudenFam.
Thank you for the question. Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H.
Maybe you are looking for
-
Hello I believe that sync/async bridge BPM is used to assist communication between sync sender and async receiver. I am just confused in understanding, what would be the return from BPM when sync sender is sending something and expecting something. P
-
Images Look Different in Finder Compared to Photoshop
Hi, I have a bunch of photos on my MacBook. They have all got profiles embedded. When in Finder they look much less saturated than when opened in Photoshop. It seems as though Finder doesn't honor the profiles unless they are in Apple RGB, ColorMatch
-
Error: A Master Record for 412000/4400PM only exists in 2007
Hi Gurus, I was using the timesheet (CAT2) and while plugging in the data, i got this message: A Master Record for 412000/4400PM only exists in 2007. When I clicked the log, the diagnosis is: you want to use cost center 412000 together with activity
-
Can we share folders using iCloud drive?
Can we add permissions to give others secured access?
-
Sap server uses PF usage and not taking up the available memory
good day basis experts, I have 16BG of total physical memory on my server. I set parameter phys_memsize to 8192 to allot the rest for my database. but it seems the server eats up PF usage instead. It eats up upto 18.3 BG and I still have 11GB availab