HT1386 How do I synch without device button?

The device button doesn't appear on my itunes when I open it. How do I synch?

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem
If this started after updating iTunes, and you still have problem after doing the above, likely you will have to wait for a update to iTunes.

Similar Messages

Synching- How do I find the Device button?

I have upgraded iTunes, after it told me to. There is no device button on show when I plug in my iPhone 5. I have uninstalled and re-installed iTunes. I use Windows 8. The Apple help doesn't help- I've hidden the sidebar.Can anyone help, please?

Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Also, turn on the side bar with CTRL+S...
tt2

How to unsilence iphone without side button?

how to unsilence iphone 2g without side button?

I would assume you are asking about how to mute a first generation iPhone (original) and the mute button is missing???

HT1386 It says to click the device button in the upper right corner....there isn't one. Itunes doesn't even recognize my devices since I did the most current update. I have two iPhones, thru different carriers, and neither one works now!

I did the latest iTunes update...I have 2 iPhones--each thru a different provider. Now, I can't sync to download any music from iTunes. iTunes doesn't recognize either device now. I went thru diagnostics, didn't work. I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one. When I connected each for the first time after update, it "installed device drivers". I have checked for further updates on iTunes--nothing. I made sure there were no updates listed for iPhones...all up to date. I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was. Windows opens to download photos but that's it. Devices are not listed at all. I have tried all 3 USB ports in computer too. I have never had any problems before this update!! HELP! I just bought $15 worth of music I can't download to phones now!

On the left hand side of iTunes do you have the sidebar up left hand side?
If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it.

HT1386 How can I synch my iPhone 3G on the same computer that my wife synches her iPhone 4S?

How can I synch my iPhone 3G on the same computer that my wife uses to synch her iPhone 4S? How can we keep our apps, contacts, calendars, etc. separate?

You'll have to create separate user accounts to keep your iTunes libraries separate.
How to use multiple iPods, iPads, or iPhones with one computer: http://support.apple.com/kb/HT1495

HT1386 How do I control which device's iCal is controlling the sync?

I make changes to my calendar on my iPad, but when I sync it with my computer it defaults to the iMac calendar and erases what is on the iPad. How do I control which device is the sync-er and the sync-ee?

Are you using iCloud?
If so, both teh Mac and iPad should be using iCloud.
Do not sync the calendar with iTunes.

How to do submit without any button

Hi ,
i am using Jdev 10.1.3.1 .
i am using JSF ADF BC Technology. i am having a problem. how to do submit the values in inputHidden field without submit or any button.
even i bind the method in valueChangeListner like below.it is not submit.Am i did any mistake? plz go thru this code and help me.
Hidden there is no auto submit attribute.
Code:
<af:form>
<af:inputHidden id="startDate"
value="#{bindings.Eventdate.inputValue}"
valueChangeListener="#{bindings.Execute.execute}"
required="false"/>
<af:commandLink text="search" actionListener="#bindings.Execute.execute}"/>
OR
<af:commandButton actionListener="#{bindings.Execute.execute}"
text="Search"
disabled="#{!bindings.Execute.enabled}"/>
</af:form>
i dont want to use command link or command button for action. how to submit the value in hidden field which is set by javascript function to the corresponding action.
could you please help me out regarding this?? .
Thanks & Regards,
Arun

Let me see if I have your use case correctly:
The user views the page, and some event triggers some Javascript code. The Javascript code needs to set the values of a hidden field, then submit the form, executing the action named Execute in the bindings.
First of all, get rid of the valueChangeListener. If you were to use a valueChangeListener, it would have to reference a method in a backing bean that takes a valueChangeEvent as its argument and returns void. Now try this - I haven't tried it myself, so I don't know that it will work, but I think it will. On your page:
<af:form id="theForm" defaultCommand="executeButton">
<af:inputHidden id="startDate" value="#{bindings.Eventdate.inputValue}" />
<af:commandButton id="executeButton"
                                actionListener="#{bindings.Execute.execute}"
                                text="Search"
                                disabled="#{!bindings.Execute.enabled}"
                                inlineStyle="display: none;" />
</af:form>And in your Javascript function:
document.theForm.submit();The basic idea is that the defaultCommand property of the form says that any submit of the form defaults to the button with the id=executeButton, unless some other button or link is explicitly clicked. The button has an inlineStyle with display none, which hides it from the user. Then the Javascript submits the form which ought to execute the default command.

HT201263 how to place your device into recovery mode without home button?

How to place your device into recovery mode without home button?

Try these programs:
RecBoot: Easy Way to Put iPhone into Recovery Mode
The Firmware Umbrella - TinyUmbrella

HT1386 My system got crashed and I dont have backup fo my iphone.... now how do i synch my iphone with new itunes without loosing my data ?

My system got crashed and I dont have backup fo my iphone.... now how do i synch my iphone with new itunes without loosing my data ?

See if this user-tip for syncing to a new computer helps : https://discussions.apple.com/docs/DOC-3141
If you have music from other sources on your phone (e.g. copied from CDs) and you don't have them on a backup, then there are some program listed half-way down this page which might be able to copy them back : https://discussions.apple.com/docs/DOC-3991

How can I synch my ipod to a new computer without losing all my content, purchased and my old copied albums? My PC and backup died in the same week and now I am told I could lose all my content if I synch?

how can I synch my ipod to a new computer without losing all my content, purchased and my old copied albums?
My PC and backup died in the same week and now I am told I could lose all my content if I synch?
I have new purchases on my new laptop but too paranoid to synch the ipod incase I lose the thousands of tunes I copied over from my old collections.

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

I have paid to have an itune downloaded to my library BUT how to I synch it to my ipod touch without duplicating all the other somgs in my library

As above.
I have 3 new itunes now in my library.
How do i synch just the 3 of them to my ipod touch without dupicating all my other songs.like hundreds of them.
Thank you

I watched the new itunes tutorial, and if you double click on the blank part of the bar that says music, videos, apps, etc, a button will show with your ipod's name.

I'm trying to sync my device to itunes. It keeps telling me to click the device button but for me it doesn't show up. I've already upgraded itunes. Also whenever I plug my device into the computer itunes never shows up. How do I make it do that? Thanks!

I need help with a few things....
1.) My ipod touch (5th gen) was doing what i believe was an ios7 update when i stopped it becuz it was taking forever. After that the screen just said connect to itunes. I've looked up how to fix it and i know it would work but there is a few things...I dont ever use my ipod for music. Just for apps and stuff and I have never connected it to itunes or anything. I need help making it so when i connect my ipod to the computer it starts syncing. But when I follow the directions for that, it says go to the device button and I dont have that option...Help!!
2.) In all the help videos, it says to do the slide to turn off thing but my ipod never lets me!! It does turn off though.
Theres a few other things. I need to know if this problem can be fixed if I can't find a way to fix the things i just said. Or if there is somebody that I can have repair it for me. Also if I have a warranty with Best Buy, I need to know if this could be covered. This was a gift from my boyfriend for Christmas and I use it a lot. I don't wanna have to buy a new one especially if this isn't a problem that can't be fixed. Thank you guys so much!!

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How do I sync multiple devices on iTunes without apps that are only on an iPad Air not sync on other devices?

How do I sync multiple devices on iTunes (iPad Air & iPhone 5) without apps that are only on an iPad Air not syncing on my iPhone 5? I have apps on the iPad that I do not want on the iPhone, but when I sync my iPhone I have apps that are on the iPad sync to it also. How do I fix this so only the apps/data on each device sync to it?

Settings
iTUnes and app store
turn off automatic downloads for apps
Then what you buy on one device only goes onto another if you want it to

How do I use the restart keyboard combination on my MacBook Air without eject button?

On my MacBook Air, I noticed that there are two restart combinations: 'Cmd+Ctrl+Power Button' force restarts my mac and 'Cmd+Ctrl+Eject' restarts my mac normally (not force restart). OS X: Keyboard shortcuts
I noticed that there is no eject button on my macbook air and was wondering if anyone knows how to restart a macbook air without eject button.
I have tried using 'Cmd=Ctrl+Power Button' but as I said, it force restarts my mac not restarts it normally.
Also, 'Fn+Cmd+Ctrl+Power Button' also force restarts my mac.
Please could someone tell me how to retort my mac normally with the keyboard shor

With Applescript Editor crate an application with the following script:
tell application "Finder"
restart
end tell
Put the application in the Dock and clicking on it will restart your MBA.

HT1386 How do I synch without device button?

Similar Messages

Maybe you are looking for