HT1386 how to set up my iphone for hot spot

how. to use my iphone.as a hot spot?

Go to settings personal hotspot and turn it on and then turn on Bluetooth. Then you need to pair the other device with the phone. Some carriers require special plans or do not support tethering

Similar Messages

How do I use my iPhone's hot spot to send email with Mail ?

Hi,
My land line is dead ... so no phone nor internet at home. But I can use my iPhone'hot spot to get on the web from my iMac. Great ... it works !
Oups ! I cannot send email from my computer using my iPhone's hot spot with Mail.
How do I do that ?
Regards.
Robert Lespérance

Hi Templeton Peck,
Thanks for droping in my thread ...
Doesn't the fact that I can surf the web with my iPhone's hot spot and that I cannot use Mail normally has I normally do give you a clue what the problem could be ?
What other information can I give you other than normally I can surf and send email with my regular ISP. Now that my ISP is dead I am using my iPhone's hotspot to surf the web awaiting that my ISP's connoection returns. Surfing is OK but I cannot send emails with through Mail.
When I want to send an email from my computer, I get a message asking me to select the the SMTP server. Then I select my usual ISP server, but the message comes back telling me it does not work.
Is there any other configuration to do ?

How to set up new iPhone for child

can a child under 18 have there own Apple id?

Yes. A child 13 or over can have their own Apple ID. You can create one for a child 12 or under by setting up Family Sharing.

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

New iPhone user needs guidance setting up 4 iPhones for family - best approach?

Hi - I'm a new iPhone user tasked with setting up 4 iPhones for family (three 4S, one 3GS). I set up the first 4S using my mother's existing Apple ID (she has an iPad) and I think (hope) hers is fine. When I set up my father's phone, my sister said to enter my mother's Apple ID during setup since they wanted to use a single Apple ID for iTunes purchases. The setup screen I'm referring to the 7th screen into the setup process for a new iPhone 4S (after the Welcome, Language, Country/Region, Location Services, Wi-Fi Networks, and Set Up iPhone screens), where it asks you to "Sign In with an Apple ID" or "Create a Free Apple ID". This screen was where I entered my mother's Apple ID into my father's phone.
By entering my mother's Apple ID on my father's phone at this point during setup, I seem to have created a "clone" of her phone - their phone numbers are distinct and they can call each other but iMessages sent to either of them initially appeared on BOTH phones. I think I have now fixed that by creating a separate Apple ID for my father after the fact and entering it under Settings>Messages. Thinking I could also enter his new Apple ID under Settings>iCloud, I found I could not change it from my mother's Apple ID (it's greyed out). I saw a recommendation in another post to click on the red "Delete Account" button at the bottom, but will that delete my mother's entire account or only its association with my father's phone?
Backing up a step or two, I'm worried that at this point I should have entered/created a new Apple ID on screen #7 during initial setup of my father's phone (instead of entering my mother's Apple ID), and that just changing settings in iMessage, iCloud, etc. won't really fix any problem(s) I've created. I hesitate to set up the other two phones before knowing how badly I've already messed things up with this one.
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?
Without knowing what might be the best way to set up these 4 new iPhones, I was thinking the four unique users of these new phones would most likely want to share apps (by purchasing them with one Apple ID), backup/synch to one computer, but maintain separate iCloud accounts so everyone's info is private? I've spent time reading other posts and see so many different recommendations for families with multiple devices that my head is spinning. Many include questions from folks migrating from older phones or MobileMe. I think my situation is simpler in that there are 4 new iphones and one existing Apple ID. Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists? Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases? Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
So sorry to have to ask such basic questions. Many thanks, in advance, for any guidance provided to help me not make any (more?) mistakes during setup that will be a real headache to remedy later, once everyone has started using their phones.

Hi edgefield,sorry you're having so much trouble.
FIRST CREATE A BACKUP ON YOUR COMPUTER -ALWAYS BEFORE PLAYING WITH THE INFORMATION ON THE PHONES (it prevents losses)
Now I'll answer your questions)
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
Yes. Create his own apple id and sign him in. then tap settings ->store -> tap on the account name -> sign out.
Then sign in your fathers apple id. (create your fathers apple id on the computer, its much easier, trust me).
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?##
No. Tap settings -> icloud, and turn everything off (keep on the phone option). Then DELETE ACCOUNT (it's got red around it and at the bottom of the screen if you scroll down). You cannot sign out of iCloud, you can only delete the account. Then clean up the contacts and information on the phone.
Then you tap settings -> iCloud and sign in. Put your fathers apple id in the section. His information will be uploaded to www.icloud.com. Then go to www.icloud.com and sign in with his apple id. Make sure his information is uploaded (you'll have to select timezone and such).
From that point you are fine except for iMessage.
For iMessage to function properly, only one apple id can be signed into the iTunes store (settings -> store). If they are both signed into the same apple id on the iTunes store, than you need to turn off iMessage on one of the phones. The iMessage may be delievered to either phone when both are signed in under the same apple id in the iTunes store.
tap settings -> messages -> imessage off
This also disables facetime. If you want them to have iMessage and Facetime, they have to have seperate apple id's signed into the iTunes store.
Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists?
Not that I've seen, will consider creating one if I have time.
Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases?
Your best bet is to create each apple id on the computer (keyboards are easier to use) and then sign them each in during the creation process. Then change the iTunes store info to the stored apple id.
This will allow each person to serpate iClouds without interfering with each others Cloud as you set up new devices.
Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
Doing it this way can cause problems (or used to, not sure if it still does), initially, when you set it up, it wants to create a backup or upload the blank info to iCloud. You are better off setting up their own apple id first and signing in with that, and then changing it in the iTunes store.
I'm off to bed, I'll check this thread tomorrow and see if you have any more questions/problems. Remember, always create a back-up before you do anything.

How to add "Done" button on Number pad? And how to set 00.00 format for UITextField?

1.) I am new to iPhone development. I have a small application & for that I need to add number pad but there is no "Done" button. I know we can get rid of that keyboard by clinking UIView but I want a separate button for this.
2.) My second question is how to set 00.00 format for UITextField as there is no decimal point available on number pad?

As to #1, you should study the iOS HIG - doing what you have in mind might be a good way to risk rejection and not have your app make it into the store.
#2:
On devices running iOS v4.1 and greater you can use the following:
myTextField.keyboardType = UIKeyboardTypeDecimalPad;
It is tricky (and perhaps not worth the trouble) if you are trying to support older iOS versions. Here is a link to the most popular solution.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Does anyone know how to set up 2 iphones on iCloud?

Does anyone know how to set up 2 iphones on iCloud using just one macbook pro whilst keeping contacts, iTunes etc separate? My wife and I both have a new iPhone 4s but want to keep everything seperate.
Many Thanks

gnormg wrote:
My wife and I both have a new iPhone 4s but want to keep everything seperate.
Then you need separate Apple ID's & iCloud accounts. This is required if you want to use things like iMessage, FaceTime & iCloud and not have a mess on your hands.

How to set-up a Timestamp for BI Delta Load in 0CLM_INVOICE datasrc at R/3?

Hi Experts,
Kindly let me know How to set-up a Timestamp for BI delta load at R/3 for the Data source 0CLM_INVOICE ?
Since the Timestamp for Upload of BI Delta is " . . : : ", we are not getting any delta value to BW.
I would like to know in where we need to maintain the DATE & TIME to fix the above problem.
Thanks.
Regards,
Jayaprakash J

Dear Jayprakash,
Chech the below links, it may help you in your case :
Re: 0FI_AA_11 Delta load failure
http://wiki.sdn.sap.com/wiki/display/BI/GeneralErrorIn+BI
Actaully you need not have to maintain the timestamp. Just try to replicate your datasource and the try to load the delta again.
Hopefully it will work.
Regards,
Rahul
Edited by: Rahul on Dec 10, 2010 10:23 AM

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

HT1386 how to set up my iphone for hot spot

Similar Messages

Maybe you are looking for