HT1386 I have connected my iPad2 to my iMac with a USB cable, and synched my photos. I want to synch my music from iTunes but get this message: "Are you sure you want to sync music? All existing content on the iPad "Marion Blackmer's iPad" will be remo
Sorry, I put my question in the wrong place. I'm afraid I will lose all my photos, etc., on the iPad.
To import your photos to iPhoto, open the app on oyur computer, then connect your iPad. wait for it to show up on the left toolbar and you can select all and import them to your iPhoto library. Drag and drop it to your desktop or wheverever you want them. Is it just photos you wanted to import?
Similar Messages
-
I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
-
Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise
If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting? -
I cant download itunes i get this message "verify that you have sufficient priveleges to start system services
Hi Chrisgardner54
I have the same problem, I tried to uninstall itunes and even go back to an earlier version and nothing works. It keeps showing the same message: "Apple movile device failed to start. Verify that you have suficient privileges to start the system services" -
Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop running off OSX 10.4.11 and am trying to get Garageband working but get this message: The Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?
Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing! -
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
-
I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
RanjitSee the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help
Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use// -
I am trying to download the new Itunes but get a message saying I need 10.6 version and I only have 10.5. How do I download 10.6?
10.5 to 10.6 is not an update, it's an upgrade. http://support.apple.com/kb/HT1444
Buy 10.6: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
I have the photography CC, and Lightroom is suddenly gone. When I try to reinstall it, I get this message: "The download appears corrupted."
https://support.mozilla.com/en-US/kb/Firefox%20hangs <br />See '''hang-at-exit'''
-
I'm trying to restore my music library on my windows laptop from discs, but while importing, I keep getting this message ""You do not have enough access privileges for this operation" and a failed import. I have tried just about everything I can think of to fix, including most of what I've seen on forums dealing with permissions and the like. Thoughts?
Thanks.
ChrisHello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
After importing the latest version of itune, I now get this message: "The I-tunes library file is locked, on a locked disk , or you do not have permission to write for this file. How do I resolve this?
check if you have read & write permissions for your music folder. in the finder, right-click on it and get info. unlock the little padlock (you may have to enter your admin password) and change the permission settings if necessary. next, click on the little gear-shaped icon and apply to enclosed items like so
the important part is to apply to enclosed items !
also, even if it seems unrelated, try the steps in this support article: iTunes: Missing folder or incorrect permissions may prevent authorization -
When I try to reload Itunes I get this error message "Service' Apple Mobile Device Failed to start. Verify you have sufficient priveleges to start system. Anyone know the solution to this issue?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
Maybe you are looking for
-
User account performance and setup
Hi, I have a MB Core Duo 2006 model (old I know!) and have tried using user accounts in the past, but have been concerned by the hit they may have on performance (my MB has been slowing down a lot recently). My wife and kids all use the same computer
-
Unmapping styles to remove XML tags
I have an AppleScript that sets up an XML Export Map for style to tag mapping, using a known set of customer styles, and I'm adding a check for non-standard (unmapped) styles to include those as well as unknownstyle tags. This is all working well. Wh
-
Qosmio X - Touchpad has no function anymore
Anyone had similar problem? Touchpad stopped working, in Device Manager it says it sopped working, or driver is missing etc. When I update driver, nothing happens still same issue. Same happens when i disable/enable device. But when I Uninstall devic
-
Case management - some questions
History of the Case Management, which is the appropriate How do CRM Case Management history records? CRM Integration for BPM - Case management and BPM - is it possibble? Is preferable Case management as a WF? There is a personal file in the CRM Busin
-
I'm a recent convert from a windows based system after many many years.. My question is this, on my old dell laptop, i was able to configure windows xp to allow me to close the screen without the computer going into sleep mode. I am wondering if it i