HT1386 I have the 3G and it is still version 3.1. I now cannot connect to i-tunes, i want to update as I now am upgrading to the i phone 4G . And I don't want to lose all my photos.
I have the i phone 3G version 3.1.3. I am currently upgrading to the i phone 4 GS and want to transfer all data from old phone!
Unfortunatly my 3G will not sync to i tunes :( and I don't want to lose all my photos etc!
Can anyone help ?
You will need to backup your old 3G and then restore your 4 to that backup. Here's a more detailed instructions
http://support.apple.com/kb/HT1766
also you should be importing your pictures over to your PC as you would a digital camera see here how to
http://support.apple.com/kb/HT4083
I'm not sure what you mean by sync? is the phone not being recognized by your computer if so see here
http://support.apple.com/kb/TS1538
Similar Messages
-
I have just installed Snow Leopard 10.6.3 and want to update my Safari 4.0.4 to the latest version. However, the latest Safari version needs at least Snow Leopard 10.6.8. What can I do, please?
Go to the Apple Icon, Top Left of your Screen and Run Software Update...
Or go here > http://support.apple.com/kb/DL1399
and download and Install the 10 6 8 Combo Update...
Be sure to Restart your Mac after the Install. -
I upgraded my two Macbook Pro's yesterday to Mavericks, from OS X 10.6.4. I can't seem to open iPhoto on ONE of them. I believe it's the same on both computers, iPhoto '09. So I went in the App store and clicked upgrade my iPhoto. Now it says the library needs to be upgraded to work with this newer version of iPhoto. Help! Am I going to lose all my photos?
I believe it's the same on both computers, iPhoto '09.
Check the iPhoto versions. The version number should be shown below in the "General" section of the Info panel, when you select iPhoto in the Finder and use "File > Get Info". With Mavericks you should be using iPhoto 9.5.1. You can buy the upgrade from the App Store.
Will I lose all my photos if I do the upgrade?
No, but never do an upgrade without making a backup of your computer, just in case something is wrong.
Your photos are in your iPhoto library. After installing the upgraded version, the iPhoto Library will be upgraded to a new format, when you open it the first time in iPhoto.
If you want to use your iPhoto Library on both your computers, the iPhoto version should be the same. -
I cannot upload my iPhoto book to the Online Store. I get an error message that I cannot connect. Instructs me to try again later. Apple support said servers are too busy. Anyone else have this problem and a solution?
I get an error message that I cannot connect. Instructs me to try again later.
Try again later?
LN -
I have re-installed I-tunes and have a new operating system (Win 7 Pro).
I now cannot sync as I-tunes says my I-Pod is already connected to a library and wants to erase my music on the I-Pod. What do I do to get around this problem?An iPod is designed to be synced with only one computer/iTunes library at a time. If you try to sync the iPod with a new/different iTunes library, iTunes on the new/different computer will replace the contents currently on the iPod with whatever is currently stored in its own library.
If the music and content on your iPod is not in iTunes or in a backup somewhere you can use the information in this user tip from another forum member turingtest2 to help you copy this content from the Nano back to the PC and into iTunes.
https://discussions.apple.com/docs/DOC-3991
B-rock -
I get a message that says cannot connect to iTunes when I try to update apps. I have tried everything. What to do?
Apple appears to be having trouble with the iTunes Store servers right now. Wait for them to fix it.
(81086) -
Cannot connect to iTunes store when trying to update or download apps, I have tried updates and adjusting the date
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
We have just installed Lion and now cannot connect to MyExpat
we have just installed OS X Lion, v10.7.2 and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?
yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b -
Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?
If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp -
my computer is telling me it does not recognise my ipdad mini and is asking me to restore to factory settings what happens if i do that will i lose all my photos, music etc? how do i get my computer to recognise my ipad mini?
Thankshave you backed up in the past with iTunes or iCloud? If so, it is possible that you will not lose this information, but I cannot guarantee anything.
Check for backups in iTunes by going to Preferences > Devices > Device backups
If you do not see any, and your iPad is still in working order, check for iCloud backups in Settings > iCloud > Storage & Backup
Also, if your iPad is still in working order, you can backup with itunes before restoring : http://support.apple.com/kb/HT1766 -
Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.
Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET -
Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?
I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html
-
When i try to add music from itunes to my ipod, Itune tells me the music on my ipod came from a differnt libray and wants to erase my whole ipod. i just loaded my ipod two days ago. i don't want to replace everything every time i want to add two to songs. My MacBook Pro is the only autherized computer.
To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the iPod/iPhone - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place and you will be able to change your settings.
MJ -
My iPhone 4 is using 4.3.3 and I want to update to iSO 6.1. I can back it up and it starts to download it through iTunes but then I get an error message 0xE8000067.
Tried all the things on the apple support site (checked USB port, deleted the 3 exe files in Task Manager, tried a new cable). None worked. Got the same message on my old computer.
Any ideas??Amazing help from apple support over the phone. Restoring the computer fixed the problem.
-
Is it possible restore my iphone without lose all my photos and midias?
my iphone has shutted off. i can't turn it on. when i connect it to my computer they ask me to restore it. is it possible restore without lose all my photos and midias?
Not unless you backed up your data before.
Maybe you are looking for
-
How to impliment inventory Management in BI using BX/BF/UM
Experts ! i have to impliment Inventory management Data flow. i was reading SAP documentation on it, but i fount it bit confusing. Could you please help me out to undertstand how does these 3 DS works ? and why do we need 3 diff. DS ? I know , i am
-
LR 5 RC3 File Renaming Buggy?
I have a bug with renaming files on export, for example I use this below. The first file out comes out as oz-print-0002.jpg, then the second is oz-print--.jpg, then oz-print-2.jpg (this is strange). The first file comes from a cr2 the second is a tif
-
SAP Netweaver 7.01: JSPM Problem
Hi, I have this system: SAP netweaver Abap+Java 7.01 SP3 I want to update the Java whit JSPM to sp 06, when i try it give me this error: Jun 13, 2011 10:57:44 AM [Error]: Cannot stop service for instance -1. Jun 13, 2011 10:57:44 AM [Error]: Cannot s
-
Iwlagn not working under 2.6.36
A fresh install of 64-bit flavored Arch Linux on my Dell XPS L401x and my (via lspci) 12:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 card is doing nothing at all. dmesg | grep iwl shows me lots of this: iwlagn 0000:12:00.0: Er
-
IMovie Quicktime Output Whitewashed on PC
I'm seeing something strange when I output my iMovie HD output to Quicktime. It works just fine on the Quicktime 7 player on my MacBook Pro. But the Quicktime Player on a Dell PC (Windows XP) is displaying the .mov file nearly completely whited out.