HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Similar Messages

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipod touch not recognized by itunes nor windows

    ipod touch not recognized by itunes nor windows, have proceeded through support suggestions with no success in correcting. thoughts?
    working with itunes on a Windows PC operating XP. In same session I can plug in iPhone which is readily recognized and all aspects of syncing work. ipod touch does not.

    Hi,
    Have you seen this link...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    http://www.apple.com/support/itunes/devices/

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • HT201628 can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave

    can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave

    Start here:
    iOS: Device not recognized in iTunes for Windows

  • My 1st gen iPad is not recognized in iTunes, help!  I have uninstalled, reinstalled, stoped and started the mobile....nothing is working.

    I have done everything I can find online to solve my problem, but I still have the same problem.  My 1st gen iPad is not recognized in iTunes!  Cannot sync!  Please, any suggestions from anyone?  Anyone else having the same problem?

    Hello casinojen,
    I would be concerned as well if my iPad was not recognized by iTunes.  Thank you for providing all the information with the steps you took in regards to this issue.  I found an article with a few more steps you can take (you can skip the steps you have already taken):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPod is not recognized by iTunes

    I have a 5th Generation iPod 30GB Video (my seventh) and have a problem connecting to iTunes. My iPod is playing okay but when I try to connect to iTunes on my laptop the display shows "Do not disconnect" but iTunes does not recongize it.
    I stop the USB connection and disconnect the iPod from my laptop and have to reset to get it back to operation.
    I followed some instructions on this forum that advised to reset the iPod, put it in Disk Mode and then connect it to the laptop. iTunes still does not recognize it and now I have the iPod in disk mode with a "Do not disconnect" flashing on my iPod display.
    What can I try next?
    Message was edited by: MFW_SF

    I’m a big fan of the iPod but what I don’t like is Apple not being very forthcoming about how to move music from the iPod back to the PC. They’re quick enough to tell you how to move the music from your PC to your iPod but when you want to do the opposite, Apple clams up tight.
    Their reasoning is probably that the only reason you’d want to take your music off the iPod is to copy it and illegally distribute it. But that is really an insult to the music buyer. There are plenty of legitimate reasons why you would want to move your music from the iPod back to the PC. For a start, what if your hard-drive crashed and the only copies of the music were on your iPod? Or you accidentally deleted a song from your hard-drive and you wanted it back, without having to buy another copy?
    It has taken me ages to work out how to get the music off the iPod and onto the computer but I have finally got it. This is how to do it on a Windows PC. Since I don’t have a Mac, I can’t help there.
    The easy five-step guide to moving your music from your iPod to your PC
    1. In Windows Explorer, go to Tools > Folder Options > View. In the Advanced Settings list, under Hidden files and folders, check the radio button for “Show hidden files and folders”. Then click OK. You’ll get a Windows security warning but it’s safe enough to disregard it as we will only be disabling this function for a short while.
    2. Plug in your iPod. In Windows Explorer, a folder will now appear with the name of your iPod.
    Double-click on that. Go to the sub-folders “iPod_Control” and then “music”. You’ll find your music there randomly scattered across multiple folders and with scrambled file names. But don’t worry, the ID3 tags are still fully intact and we are now going to “unscramble” the files.
    3. But first copy all the music from those iPod folders into a new folder on your hard-drive. Move all the songs into one single folder and discard all the folders that your iPod made. By the end, you should have one folder in your hard-drive with all the scrambled files together.
    4. Open up iTunes and do the following : Go to Edit > Preferences. Under the Advanced tab, under the General “sub-tab”, select the local folder where you have copied the music from your iPod (by clicking Change…).
    Check the box “Keep iTunes Music folder organized” and click OK. Also make sure you have wiped all previous music from iTunes so your playlists are blank.
    5. In iTunes, click “File” then “add folder to library”. Select the folder where all your copied music is. iTunes will now re-import all your music back into the playlists. But more importantly, because you have previously clicked “Keep iTunes Music Folder organised”, iTunes will now start renaming and organising your songs into their correct names, albums and folders. This may take a while depending on how many songs you have in your iTunes library.
    There you have it. Oh and don’t forget to go back into Windows Explorer, and to Tools > Folder Options > View. Reverse what you did so the hidden files remain hidden again. You may also want to de-select “Keep iTunes Music Folder organised” if you don’t normally use that option.
    You may want to also take this opportunity (before doing the above) to wipe your iPod and revert it back to the factory settings also a suggestion; defrag your iPod (although I think that is potentially rife with problems). Then afterwards, just use iTunes to move your music from your PC back to your iPod.
    Reverting it back to factory settings is good for getting rid of any crap that has built up inside the iPod and making it run faster. After all, the iPod is basically a hard-drive and like PC hard-drives, an iPod can do with a purge once in a while to give it its speed back.

  • IPod is not recognized by ITune. It is recognized by my computer

    Ipod is not recognized by Itunes but is recognized by my computer

    Hi Kingme306,
    It sounds like your iPod classic is recognized and appearing in Windows, but not iTunes.
    The following information may be useful in resolving this issue:
    Symptoms
    If you see your iPod in My Computer (Windows XP) or Computer (Windows Vista or Windows 7) but not in iTunes under Devices, try the following solutions. Start at the top and work your way through the steps until iTunes recognizes your iPod.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks,
    Matt M.

  • My ipod is not recognized by itunes. Menus missing in itunes.

    After I updated my ipod and my itunes, now the ipod is not recognized in itunes.  I went through all the recommended steps; starting and stopping various programs on my control panel, turning ipod on and off, checking cables - everything short of standing on my head.  In the process of all that,  I realized that the menu/task bar on the upper left side of the itunes page was gone. It wasn't there when I started this odyssey and it still isn't there..  I uninstalled and installed itunes again. I have Windows 8. Still no menu and still not recognizing the ipod. My ipod is 32gb touch screen.  Probably 3 years old or so. Was working fine before the updates......
    Thanks!!!

    Hi All,
    I tried to download the update and iTunes doesn't work at all! It won't even open. I have tried all of the steps above but still no joy.
    Any help would be much appreciated as I have been on this for one week already.
    Close to my wits end and moving back to a Sony and trying Android for the very first time.
    Thanks in advance.
    Regards
    Darren

  • 5th generation ipod is not recognized by itunes, why?

    5th generartion ipod is not recognized by itunes, why it this?
    thank you.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    If it does not charge
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.

  • IPod classic not recognized in iTunes and in Finder, doesn't charge

    iPod classic not recognized in iTunes and in Finder, doesn't charge and even doesn't charge outside of Macbook. I've tried rebooting Mac, rebooting iPod, I installed once again iTunes but nothing works Everything was fine until the latest iOS and iTunes update. Please help me :-)
    OS X Mavericks 10.9.5; iTunes 11.4

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • TS1410 My older iPod is not recognized by iTunes. A yellow light flashes.

    My older iPod is not recognized by iTunes. When plugged in a yellow light flashes. When unplugged and turned on, I see green and yellow lights flashing alternately. Help?

    The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
    For the BMW, you have to find out what brand interface was installed in the vehicle
    can be dension or original BMW  in the x5, if dension you can get something call
    Scosche passPORT if  BMW brand you can get a new cable from Bmw with the usb and dual power supply,
    In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
    http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

  • Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

    Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

    The latter. I cant tell you how many times I've reinstalled lion! all your apps will be fine!
    Things that will change are system graphics if you altered them with something like candybar or did it manually.
    Having said that, you should always backup your stuff with time machine incase something does happen.
    This is a very important step which will insure the safety of your files while doing things like updating or installing the OS.
    Please exercise caution when doing things with a Hard Drive.

  • TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

    Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above  "
    iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
    "....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

    Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
    Products Affected
    iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
    This article has been archived and is no longer updated by Apple. 
    Symptoms
    After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
    Resolution
    The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
    Important: You must be logged in as an Administrator.
    Click the Finder icon in the Dock.
    Choose Go to Folder from the Go menu.
    Type /Library/Preferences/SystemConfiguration
    Click Go.
    In the Finder window, locate the file named NetworkInterfaces.plist.
    Drag this file to the Trash.
    Restart the computer.
    Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    To refresh your network settings, from the Location pop-up menu, choose New Location.
    Type a name for your location and click OK.
    Click the Apply Now at the bottom right to accept the changes.
    If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

  • Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    The normal suggestions.
    Close the app,off fully.  Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
    Then reboot the pad and try the spp again.  If same issue, delete the app, then reload it.  ( no charge). You may just have a bad copy.  If continues, write to the developer, they may need to do an update.  I have an older version of the same app and it works fine.
    Since yours is the ad supported version, they are maing real sure you see the ad.  Is it as simple as you need to click thru the ad to get to the game?

Maybe you are looking for

  • Regarding ReCreating Catalog in SQL Server 2005 which was existing in SQL Server 2000

    Hello I was using SQL SERVER 2000 ... In one table I've created FULL TEXT SEARCHING ( Full text catalog along with full text indexing) Now we had to install our db in SQL SERVER 2005 standard edition. But while taking script it gave me two lines like

  • Update Lion and TV doesn't work

    Hi, I have an Imac 24" (Core Duo 2009) and connected with TV (Sony Bravia 40"). When I update OSX Lion, the TV doesnt work. Lions detects the TV displays fine with all resolutions, but doesnt send the image. Sorry form mi english Thanks Igor

  • 2013 OWA - Open Another Mailbox, :-( something went wrong, Error 500

    Our client is experiencing an issue where they are not able to open another mailbox even if the user has full access to the account under mailbox delegation.  The user would click on the 'Open Another Mailbox" and they receive the following error som

  • Please read this post

    Hey Guys, I just wanted to share something with all of you, this forum does not get enough attention from the people who already know how to use the full strength of Java3D, and since there are so many unanswered questions here, and I'm sure most of

  • Change Default My Status

    When Lync 2010 Client started, My Status is set to "Available" by default. Is there a way to change it? For example, when Lync 2010 Client started, My Status is "Busy" by default until I change it manually. Thanks.