HT1386 i just upgraded my ipod touch version to iOS 6.1.3 & when I sync my ipod to the conputer,it doesn't sync music,videos,apps except it sync only contact & shows -50 error, What should i do?
I upgraded my Ipod touch version to iOS 6.1.3 yesterday & the problem is that as i sync my ipod & the,computer,my computer sync only contacts & after showing determining apps to sync, my computer won't sync any others anymore.
It abruptly stop sync & when i start over the process, it still operates the same.
What should I do & i wish to get my ipod back.
Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0
Similar Messages
-
My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?
Change it to an email address.
-> https://appleid.apple.com/ -
My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?
Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
my ipod touch has been through a lot before this issue and the cameras have always worked. it wasn't until i updated the sotware on the ipod that the camera "shutters" haven't opened. at first i thought nothing of it because before when that would happen it was because there was not enough mempry to take photos or videos. i then proceded to delete some. but the shutters wouldn't open. i don't know what the problem is. i can open the app, and look at my pictures, but i just can't take any. memory is not the issue, so i haven't a clue what's wong. since then i've updated the software again but the camera still refuses to let me use it. i've tried switching between the two cameras and both don't work. can anybody help me? or is this an issue where i'd have to take it into an apple store?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My ipod touch is stuck on recharge mode even when it isn't connected to the computer???
Right now my Ipod touch is in the charging / recharge screen and it won't leave that screen even when I unplug it. And it don't seem to be charging the red part on the battery indicator is flashing red and not moving into the green at all I have tried everything and would like to know what I can do to fix this!!!
JessicaTy here. It covers not charging
iPod touch: Hardware troubleshooting -
The best apps I had, now I can not have?
The backup that iTunes makes does not include synced media like apps and music.
As others have said
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews -
Why can't I restore my ipod touch version 2? Error 1604?
How can I restore my Ipod Touch, version 2, ios 4.2.1? I tried to do an original restore from ITunes. It erased all of my files. The Ipod now sits there with a screen suggesting to plug it into ITunes. It is plugged in! Itunes doesn't even recognize it as a "device".
I was able to repeat the process several times, by unplugging it, re-starting ITunes, and re-running the original restore.
I got the following message, "The Ipod could not be restored. An unknown error occurred (1604)." I went to the "More Information" section, but none of the suggestions applied to me.
In this condition it is totally unusable!Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
I have a IPod touch version 2.1.1 (5f138) and I want the newest version that 2.1.1 allows
I have a IPod touch version 2.1.1 (5f138) and Im aware that I cant download the current update. I was wondering if there is any way for me to download older updates so that I can make the iPod somewhat functional specifically with downloading apps
Here's the link to purchase iOS 3.1.3:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Regards. -
Froozen IPod touch - due to iOS 4.3.3 UPDATE
Just updated my IPod Touch 2gen - with iOS 4.3.3 update - due to i tunes requested, the IPod turn off to reboot & will not start back up.
Try every thing - putting it in DFU mode ...etc. what's really got my goat is that when I took in in the shop they said its now totally broke & I need to buy a new one !!!!! it was ok until I updated with Apples update software.
I feel ripped off !!
Does anyone have the same issue ??? Please helpDid you try a hard reset? Download RecBoot and see if that will kick it into recovery mode, so you can do a manual install/restore, as outlined in link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
ITunes 10.5 won't update files properly on my iPod Touch 4G running iOS 5, how can I fix this?
I recently updated iTunes to 10.5 and my iPod Touch 4G to iOS 5, but now when I try to edit the ID3 tags or artwork of songs on my
iPod using iTunes, iTunes just says "Preparing to update files" but it never actually updates them. When I try to add songs
manually to iPod (my iPod is not set up to sync music with iTunes [see note below]), the same thing happens, with the newly added
songs appearing on the iPod library but are grayed out with a still loading icon next to them. Also, in some instances when I try
to change the artwork of all the songs on an album, it grays out the songs I tried to change, puts an exclamation mark by them,
and applies those changes to other songs on my iPod! And if I delete the songs I attempted to change it deletes the songs that
were received the artwork change. The songs that were unintentionally changed somehow got overwritten by the songs I was trying to
change while retaining the original tags of the songs that were changed. Not sure if I'm explaining this clearly so let me give an
example: song A is a song on an album on my iPod, song B is on song on a completely different album on the iPod. When I change the
artwork on song A, it somehow messes up my library and song A overwrites song B, but it keeps all of song B's ID3 tags. So I don't
know song B is song A until I play song B, at which point the ID3 tags are changed to the tags of the song A, and song B is just
disappears. This only started happening after updating to iTunes 10.5 and iOS 5. Not sure if the problem is caused by iTunes 10.5
or iOS 5, but I did search online and found someone with the exact same problem effecting their iTunes 9.1 (no iPod involved).
Can someone please tell me why this is happening and how I can fix it?
Note:
I add songs manually to iPod because I don't keep my music on my PC and sync my music with iTunes because it would take up too
much space and I want to be able to add songs on my iPod from other computers. Once you set it up to sync music I believe it
disables making any changes to your iPod with iTunes on other computers.okay, I don't know about the rest, but about the songs never actually loading onto your iPod, I found in another discussion how to fix that. I'm using Windows 7, so I don't know if the steps are the same, but the end result is the same. So go into your Start menu, then into accessories, right click 'Command Prompt' and click 'Run as administrator'. Then type in the following: netsh winsock reset then press Enter. After a few seconds it should tell you to to restart your computer for changes to take effect. Restart your computer, then restart iTunes, then everything should be working fine. It still takes forever sometimes to update the iPod, but eventually it will work. I've had to do this multiple times, so I'd suggest copying & pasting this solution into a notepad or Word document and saving it on your computer, so you don't have to go through the discussions again to find it. This tends to happen to me nearly every day unfortunately Hope this fixes that problem, but I'm not having any of the other problems fortunately, except for removing the artwork of the songs it updates without me asking it too. PS I think my problem may be with iOS 5, because iTunes 10.5 came out before iOS 5, and I think everything was fine before I updated my iPod, but I really don't know where the problem lies
-
ITunes always wants to restore my iPod Touch (4th gen, IOS 5.1.1) constantly
I have an iPod Touch 4th gen, IOS 5.1.1
When I plug it into iTunes, I get an eror message saying:
"iTunes cannot read the contents of the iPod. Go to the Summary tap in iPod preferences and click Restore to restore this iPod to factory settings."
I have restored my iPod like the message says, but once it is done restoring and I have unplugged it from the computer, the next time I plug it in the message comes up again. I have tried reseting both from backup and as a new iPod.
Please Help!Mabe this:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
From:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
BBM for iPod Touch 4G with IOS 6.1.3
I have an iPod Touch 4G with IOS 6.1.3.
Is it possible to get the new BBM app for it, even though it says I need GPS?
Help please! Thank You
grace_hambrookYes You Can Get It.
Follow These Steps:
1. Download This IPA First, This Is The Orignal BBM.ipa.
Link : http://www.4shared.com/mobile/7Yc-8Sls/BBM_103.html
2.Download iFunBox For Mac Or Windows.
3.Connect Your iPod Touch With A Wire To The PC.
4. Open iFunBox And Click On The Install Button Located Near The Title Bar.
5. Open Your iPod And You Can See The BBM App Installed.
6. Open It And Create An BB ID And You Are Ready..
My Name Is Aditya And I Hope It Works For You !! -
I had to reformat my HD. Now I'm trying to restore from my Time Machine, back up external disk using Migration Assistant. The M.Assitant doesn't see my external disk though it's connected and turned on. What should I do?
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062 -
IPod touch 4G with interferance on 1 channel when connected in my car
I have an iPod touch 4G with interferance on 1 channel when connected to my VW Golf (2009) using VW cables and a RNS510 stereo system. I can only listen to it if the balance is full left channel! Tried it in another car and it is fine. Tried my sons 2G touch in my car and that is fine. VW say the stereo is fine? I used the same settings as the VW technician's iPod his was OK and mine wasn't. Any ideas how to fix this?
ThanksTry turning off your iPod and turning it back on. It might Help.
-
It will the Ipod touch 4g support iOS 7?
It will the Ipod touch 4g support iOS 7?
No. It will not be compatible with the 4th generation iPod touch.
iOS 7 will be compatible with:
iPhone 4
iPhone 4S
iPhone 5
iPod touch *5th generation 16GB
iPod touch *5th generation 32GB/64GB
iPad 2
iPad with Retina Display
iPad mini
Maybe you are looking for
-
I have the iPhone 4S and I cannot get my apps to download. I will click free then install and then it will ask for my password. Once I enter my password correctly it will verify my password an then it won't do anything. what should I do?
-
How do you eject a hard drive?
How do you eject an external hard drive?
-
Sqlldr errors loading XML file
I am getting two errors on two different data elements trying to load an XML file. DB version is 11.2.0.2.0 - 64bit. This is part of the instance file: <?xml version="1.0" encoding="utf-8"?> <SamseAMSS xmlns:xsi="http://www.w3.org/2001/XMLSchema-inst
-
Hi there I have a T61 which a dock and two external monitors connected. HP L2035 (1600x1200) on the DVI and Dell 1907FP on the VGA. Everything used to work just fine, until some windows update was installed few days ago. Now I can't get the HP disp
-
I have a report which outputs 14 columns so the width on the columns is limited. In the report I allow csv output. However, the output on some of the columns can contain more than 1000 characters. The landscape quickly becomes crowded. So I used subs