HT1386 If I synced my iPhone, but when it restored it did not restore my calendar. Is there anything I can do?
I've lost my calendar after I updated, restored etc. Any ideas?
As you can't see anything probably not .You could try a reset but likely you have damaged the screen internals
Apple will exchange for a refurbished iPhone 4S for $199
Similar Messages
-
I recently got a new iphone but when I restored it in iTunes one of my games that I have played for months RESET. How do I get my old game info back?
If you made a backup before you restored it you can restore your iPhone from a backup and your game data should be restored. When you connect your iPhone in iTunes you can right click on it in the sidebar and select restore from backup.
-
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
I have been restoring the backup into a new iphone for a week. My pictures do not get restored however. Is there anything I can do?
Not unless the phone was backed up to the icloud or in iTunes at some point. I know you said it's crushed but can it be connected to a computer? If so you can still back it up in iTunes and then when the new phone comes use iTunes to restore that back up on it.
-
I updated my iPhone with the new update..and then it turned off...instead of turning back on it tells me to plug it into iTunes..and when I do iTunes tells me that my phone is in recovery mode and needs to be restored..is there anything I can do without restoring it?
Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.
-
Help
To clarify, iOS 6 is compatible with the 4th generation iPod Touch, but that doesn't mean you get all the features. Siri will only be available on the 5th generation iPods.
-
I need wifi at college and can't get it since the iOS 6 update. Does anyone know how to fix this?
Talk to the support people at St. John's to see what the problem is and what they recommend.
Inform Apple of the problem at http://www.apple.com/feedback/ipad.html -
My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. When you go to turn it on, it shows the Apple symbol, then it goes to the connect to iTunes screen. When I do that, it just says error with the code 9006. I've followed what the Apple site has said to do for it, but the phone is still is the same state. Is there anything I can do? I need my phone back as soon as possible.
Hello Hester Emily,
Thanks for using Apple Support Communities.
I'm sorry to hear about the difficulties you're experiencing after this update process. I found the following article that has more information on the iTunes error code 9006:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Take care,
Alex H. -
I went to use 1 Click DVD Copy and there was an upgrade, so I went to the web site and downloaded the new version. After it was downloaded, I tried to use it; however, the disk to click to copy CD's was distorted and messed up my desktop. I did not have this problem the last time I did this when I was not with Firefox.
Is there anything I can do? Thank you.Click here and contact Apple’s Account Security team; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123684) -
I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them. I can not click on those songs, delete or anything and when I eject the phone they are not on the phone. I tried to re-add the songs and it says it can't add songs because they've already been added. So HOW can I get the songs to actually ADD to my phone to where I can listen to them? It's like they're stuck in Sync limbo or something! Any help would be greatly appreciated.
I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.
-
I have a macbook, an ipad, and an iphone with the Mail app on all three synced through icloud, but when I read and delete emails on my phone, the inbox on my ipad is not update, so I have to go through and mark as read or delete messages again. How can I sync my iphone and ipad? (it seems like each is synced only to my laptop, so don't synchronize until I go home and use my laptop.
POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap" -
Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?
Also where exactly on the laptop is teh data stored.
Thank you!!go to 'Edit' in the menu bar. Then choose 'Preferences'.
you'll see a pop-up and there's a tab called 'Devices' there. If you click that, you will be able to check a box that says 'prevent automatic syncing for iPods, iPads and iPhones' or something like that.
Hope this helps
NB: if you don't even see the menu bar that has options like 'File, Edit, View, etc', first click the black/white square button on the top left of your screen, and then click 'show menu bar'. It should pop right up.
Good luck -
i am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?
Try erasing the iPod photo cache.
http://support.apple.com/kb/ts1314 -
I created an album on the iPhone but when sync'ed to the mac, the album disappears. Is there a way to share albums created in iphoto on the iphone with the iphoto on the mac?
Is there a way to share albums created in iphoto on the iphone with the iphoto on the mac?
No, there is not yet a way to do that. Albums created on the iPhone cannot be synced back to the mac.
You might try other ways to send photos back to the mac in a structured way, depending on your IOS version:
You could use Journals instead of albums. If you share a Journal, you can see it on your Mac. http://support.apple.com/kb/PH3152
Or create shared photo streams. iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Maybe you are looking for
-
Hi, what is the meaning of WIRE PAYMENTS & ACH. Thanks, SAI
-
Proxy Activity terminated because errors occurred during package checks
Hi, When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also an
-
I need to find a print driver for my okidata laswer printer
I have an older okidata OL 610e/PS laser printer that still works very well. I would like to print using my G4 and possibly my new MacBook Pro. I bought a USB data switch box that connects to the back of my printer and then has a USB connection to my
-
Bad Gateway 502 with Motion install
I keep getting a 'Server gave an error during download Bad Gateway 502' response when I try to install Motion X on my system. Has anyone come across this that can suggest a solution? Thanks!
-
Can you shorten a class path?
I have a Flex Library with a rather deep folder structure, e.g. com.myDomain.customerA.project1.controls.myClassA If I now want to use this custom class as an itemRenderer for a DataGridColumn I would have to write: itemRenderer="com.myDomain.custome