HT1386 iPhone times out during iCloud restoration

My iPhone times out during syncing with iCloud

Hey PLabrozzi,
Has iTunes displayed an error message when syncing the iPhone? If so reply with the exact error.
Make sure the iPhone is directly connected to the computer and not plugged into the monitor, keyboard, or a hub.
This article has some general tips for a similar issue that may resolve this issue.
http://docs.info.apple.com/article.html?artnum=301267
Jason

Similar Messages

LMS 4.2.2 times out during inventory collection on VSS

A customer of mine have 2 VSS systems for wich IC times out during collection when trying to read from flash on them. From the ICserver.log
[ Thu Dec 13 16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,70,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS:FlashAGI_CISCO_FLASH_Mib:g$eval:populating FlashAG attributes failed via CFM, trying OCFM...
[ Thu Dec 13 16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,90,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS:FlashAGI_CISCO_FLASH_Mib:g$eval:populating FlashAG attributes failed . Hence aborting fallback.:: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
[ Thu Dec 13 16:45:19 CET 2012 ],ERROR,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,57,com.cisco.nm.xms.xdi.SdiEngine,initAndEvalAGIs,385,com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
[ Thu Dec 13 16:45:54 CET 2012 ],ERROR,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,57,com.cisco.nm.xms.xdi.SdiEngine,initAndEvalAGIs,385,com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
I have tried raising the "Transport Timeout" value in " Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings" to 480000 msec but no difference. Am I tuning the wrong timeout value or is there a known bug for this?

Sorry for posting. I found I was changing the wrong timeout value.

G4 times out during downloads

My G4 times out during Software updates. I only have dial-up and computer times out after about 2 hrs. I then have to start all over again to try to download. Is there a download that will let me resume where it left off. Ex. a security update of 80 mb. times out around 50 mb. Please help if possible , I need these updates.

There are a few browsers out there which can resume the failed download
and not have to start over from the beginning; of course, since I've been
lucky lately, and my standard Firefox 3.0.16, Safari 4.0.2, Opera, & Camino
appear to work OK and not time-out, I am not sure if these offer that feature.
Most can pause a download and cancel it, too; before it is done.
The Safari browser (not sure if the feature is an option or plugin) is said to
be able to support the resume interrupted downloads function. The part of
the browser known as the 'download manager' in the download window is
often part of the key to resuming downloads if they are interrupted. See an
example of this as shown here. It should be familiar:
http://www.askdavetaylor.com/howto_resume_interrupted_download_apple_safarifirefox.html
Also, Cyberduck, a freeware browser for several platforms, offers this
function as part of its standard fare. Cyberduck: http://cyberduck.ch/
Under its Advanced Transfers feature, the promo write up says it can
resume both interrupted download and uploads. It is a 12MB D/L file.
Perhaps there is a dialup setting you can use to extend the time
sessions, so it won't time-out as fast.
Good luck & happy computing!

Can I use find my iPhone with out an iCloud account?

Can I use find my iPhone with out an iCloud account?

Ok! So there's no way around it then? My friend has an iPhone 4 that she got used and the 3 available account have been used up. I understand how that works but was wondering if there was a way around that so she could still use the find my iPhone app to locate the phone if needed. Thxs

My iphone 4S failed during a restore process

my iphone 4S failed during a restore process ..
message:
The iPhone [device name] Could not be restored. An unknown error occurred (4005).
when open itunes & my iphone connect to the computer is not detected ..
only screened cable to connect to itunes picture ..
my itunes version is 11.2.2
I have done a hard reset & there is no change
please can you help me ...

Hi apocalypse4405,
If you are getting an error 4005 during an iPhone restore, I would suggest using the steps in this article to troubleshoot -
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
Thanks for using Apple Support Communities.
Best,
Brett L

WebLogic Server Times OUT during DEBUG mode startup

Hi,
I am having a issue where my WebLogic Server 10.3 times out when I try to run it in debug mode in my workshop. Below is the error I get.
"Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start. Server did not start after 480s. "
Do anyone have any idea why this is happening? I have reinstalled workshop but still same error.
Thanks

I have also seen this error when the debug mode does not start.
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java -client -Debug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms1200m -Xmx1200m -XX:CompileThreshold=8000 -XX:PermSize=192m -XX:MaxPermSize=192m -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\bea103\WLSERV~1.3 -Dwls.home=C:\bea103\WLSERV~1.3\server -Dweblogic.home=C:\bea103\WLSERV~1.3\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -DKS_URL=rmi://10.87.40.196:1188/KS -Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light-portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info-mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info-mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security -Dweblogic.Name=AdminServer -Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]

EM times out during deployment

I have a fairly large ear file (~16M) that I've deployed successfully using EM.However deployment has started failing with EM timing out before completion.I'm now forced to use "dcmctl" to do deployments.
Any idea how I can fix this problem?I'm running 10G(10.1.2) on Solaris

There are a few browsers out there which can resume the failed download
and not have to start over from the beginning; of course, since I've been
lucky lately, and my standard Firefox 3.0.16, Safari 4.0.2, Opera, & Camino
appear to work OK and not time-out, I am not sure if these offer that feature.
Most can pause a download and cancel it, too; before it is done.
The Safari browser (not sure if the feature is an option or plugin) is said to
be able to support the resume interrupted downloads function. The part of
the browser known as the 'download manager' in the download window is
often part of the key to resuming downloads if they are interrupted. See an
example of this as shown here. It should be familiar:
http://www.askdavetaylor.com/howto_resume_interrupted_download_apple_safarifirefox.html
Also, Cyberduck, a freeware browser for several platforms, offers this
function as part of its standard fare. Cyberduck: http://cyberduck.ch/
Under its Advanced Transfers feature, the promo write up says it can
resume both interrupted download and uploads. It is a 12MB D/L file.
Perhaps there is a dialup setting you can use to extend the time
sessions, so it won't time-out as fast.
Good luck & happy computing!

IPhone is stuck in restoring settings during iCloud restore?

I have been trying to restore my iPhone for about 12 hours now, and I'm about to pull my hair out if it doesn't work soon. The restore to factory settings goes fine, and then when I begin to set it up, it first gives me trouble activating it, but I just press continue when it says it hasn't been activated and a few minutes later I have signal. The next problem arises when I try and restore it from a iCloud backup. I have tried 3 different back ups, all 3 have given me the same problem. They say there is anywhere from 15-45 hours remaining, and it gets stuck at about a centimeter along the progress bar of the restoring settings part. I have not been able to get past this. Quite a few times it has said that my internet connection failed and I'll need to restart the restore. I know this most likely isn't true because I'll be on the computer at that exact point and not have an issue with the computer. I also have a very stable internet connection, and very fast. When I have done restores in the past it took about five minutes. Help?!

Same exact problem, this time with the iPhone 5. Apple fails yet again.

Voice Memos Greyed Out After iCloud Restore

I lost my iPhone 4S and just set up my new iPhone 5 by restoring from iCloud. The Voice Memos are greyed out. Is there any way to get them back?
Thanks!

Whups, never mind. They all became accessible, today. All it took was time

Why is my iPhone 5s stuck after icloud restore

Hey I got my new iPhone 5s. This is my second one tho, but after I pressed to restore my setting from icloud to this new phone its started. I got an apple logo with a bar which won't go further and stays arount 5%. I've tried to press the sleep and home button at the same time but once I start it again it just stops again at the same place. Someone who knows how to fix this?

I suggest that you put your phone into recovery mode. Here's an Apple support page that explains this process. It needs to be followed step by step very carefully. Even then it may take several tries before the device enters Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Time Out during Download of CSV file

Hello everybody,
I need some hints regarding CSV Downloads.
In some cases I am getting just blank pages after starting a CSV Download.
It seems to be related to the a,ount of data.
At about 5000 rows the download works fine, but with about 10.000 rows I am getting blank page.
It does not matter wether the download is started from an interactive report vie the menue or from a static report via the link.
I know that the query is running at about 20 seconds for the 5.000 rows.
A look into the Enterprise Manager tells me that the following function is using nearly all the CPU time during this session.
declare
rc__ number;
simple_list__ owa_util.vc_arr;
complex_list__ owa_util.vc_arr;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 63;
null;
null;
simple_list__(1) := 'sys.%';
simple_list__(2) := 'dbms\_%';
simple_list__(3) := 'utl\_%';
simple_list__(4) := 'owa\_%';
simple_list__(5) := 'owa.%';
simple_list__(6) := 'htp.%';
simple_list__(7) := 'htf.%';
if ((owa_match.match_pattern('f', simple_list__, complex_list__, true))) then
rc__ := 2;
else
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
end if;
:rc__ := rc__;
end;
My ApEx-Version is 3.1.2.
Anybody any idea what might cause this problem?
Regards, Tine.

Hi,
if your APEX applications are accessed from Oracle HTTP Server (OHS) you can increase the 'TimeOut' directive in the OHS configuration.
The default value for this directive is 300 seconds.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14190/netconf.htm#sthref267
Kind regards,
Iloon

How can I take "other" out of my iPhone w/ out a full restore ( I have school is why)

I was wondering what to do with out a restoration

You can't. How much Other do you have? Based on what you've put in your profile, it doesn't look as if you have very much. Total free memory on an 8 gig iPhone would only be 6.46 gigs.
For more information on how memory capacity is reported, see this article:
http://support.apple.com/kb/TS2419
Best of luck.

HT201413 My iPhone turns off during the restore & comes up with error 1611 - help?

My iPhone kept telling me I needed to update to the new iOS 5 software for some of my apps to update. So I plugged it in and started the update. But then my phone kept turning itself on and off. I put it into recovery mode & then tried to restore it. But it goes through as if to start the restore ie. extracting software, preparing to restore etc - the little loading bar comes up under the apple logo on my phone but then my phone just turns off.
I really need my phone back & I can't afford to buy another one which was what an apple store suggested - they didn't even do anything different to what I'd tried! I've only got a few months of my contract left until I can upgrade and I can't upgrade early. Is there anything anyone can suggest to get my phone working?? PLEASE?!
Thanks x

This Error code is most often given when Apple cannot communicate with the iPhone. Make sure your iTunes is current and is up to date. Click the iTunes Tab at the top of this Web Page and get current iTunes. If still problem, make sure the computer Hosts file is not blocking Apple Servers. Try a different computer.

Ipod touch (4th gen) is disabled and stuck on "recovery mode" and i keep reciving "error 3259" connetion time out when i restore. what should i do?

hello, i left my ipod touch connected overnight to my playstation3 to charge and the next morning i woke up to find the ipod disabled. i put it on recovery mode and tried to restore it, but everytime itunes downloads the file, a windows pop-up appears saying "network connection timed out error 3259" and now my ipod is stuck on recovery mode. what should i do ?

You posted in the iPad forum instead of the iPod forum. I'll request that Apple move your post.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
 Cheers, Tom

Iphone times out and loses wep

I enter my wep and iphone connects to my home network. once I phone turns off automatically and I go to turn it back on, it shows the network available, and secured. when attempting to connect to it, it states it is not able to connect. I then have to reenter the wep each time. What gives.

Thanks for the reply. I have tried the forget this connection when it won't connect. When I do this I can get it to connect until the unit shuts off. Today when I get the cannot connect, I repeatedly tap the connection and get the cannot connect screen but after several times it finally has connected. It also has nothing to do with signal strength as it is full signal.
Thanks everyone.

HT1386 iPhone times out during iCloud restoration

Similar Messages

Maybe you are looking for