HT1386 Itune 11 on Windows 7 x64 and iPad 2. The device do not appear in Itunes.
Itune 11 on Windows 7 x64 and iPad 2.
On 3 different PC and 3 different iPad 2 when I installed iTunes 11.1 Windows Autoplay recognise the iPad but iTunes do not.
The device does not appear in iTunes and thus neither synchronisation nor backup are possible.
Reverting to the previous version of iTunes solved the issue.
However with IOS 7 iTunes 11.1 is required and I am back with the same issue. Could you please help?
Thanks and best regards
If you try syncing with iTunes again, perhaps the phantom album will be erased since it does not exist on the computer.
Have you tried restarting or maybe resetting the iPad to see if the album will disappear?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.
Hi there,
If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W. -
I purchased an album on iTunes on my computer, and one of the songs will not play. Itunes says that I need to authorize my computer to play it, but it is authorized. What do i do?
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up. I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab. Therefore how can I update the musci on this shuffle or see what the problem is? Thanks
Hi Swill79,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful for troubleshooting your iPod connection:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy -
i just got an IMac, and when i plug my IPad in, the device is not showing up on itunes ? can anyone help me ?
i tried many times, and it still dosent workTake a look at this Apple article -> iOS: Device not recognized in iTunes for Windows
Is the Apple Mobile Device Service installed and running on your computer? -
I just installed Itunes on Windows7 x64 and I get the following error...
I just installed Itunes on Windows7 x64 and I get the following error when trying to open it. "Itunes cannot run because it detects a problem with Quicktime. For repair instructions click Help." When I do this all it pretty much tells me to do is reinstall which doesn't really do anything at all. Another method mentioned is to download quicktime as a stand alone installer and isntall that version again to no avail. I have no idea what to do. Thanks for your help. I can provide any information needed upon request. And yes I have uninstlaled completely restarted then reinstalled only to get the error again.
Good lord.
Right. Presumably either this one:
... or this one:
... is at the heart of matters. The second one is the more familiar one. So we'll assume (to begin with) that the first one is a rare complication of the sort of install trouble that can produce the second one.
Rather than using Revo, I'd like to try using the Windows Installer CleanUp utility to clear the installation configuration information for your Apple Software Update. Unfortunately, doing so has become more difficult
ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove". Quit CleanUp.
Now try uninstalling (again without using Revo) iTunes and QuickTime. If those uninstalls seem to go through okay, restart the PC.
Now try the iTunes reinstall again. Does it hang with that "required module" error again? or does it install smoothly this time? -
I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.
not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides. -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
To sync contacts with my computer, I choosed "Sync Contacts with" within iTunes for Windows Outlook and Its suncking but contact is not showing in the Oulook contact.
Do changes/additions to the contacts list in Outlook appear on the iPhone?
-
I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?
From the box the iphone came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download fromwww.itunes.com/download)"
You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone. -
The iTunes setup would finish (clicking the finish button and everything) but the icon will not appear anywhere in my laptop?
Try right clicking on your desktop then select new short cut from the drop down menu, find iTunes in the pop up window then click ok.
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
and my computer opened iPhoto as it always does. It obviously recognized the device, but the iPod sis not appear in iTunes and I therefore could not sync it. Is there some setting I may have accidentally turned off?
Also, today, there seems to be no sound coming through either my internal speakers or my headphones, and not just in iTunes. I doubt these two problems are related, but perhaps there is something beyond coincidence and an old computer?but the iPod sis not appear in iTunes and I therefore could not sync it.
Try reinstalling the AMDS > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X
there seems to be no sound coming through either my internal speakers or my headphones, and not just in iTunes
For sound issues check System Preferences > Sound
Make sure the Mute button is not selected. -
I've just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working
Hi everyone! I’ve just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working. When I went to the support site, I found that there are no drivers for Windows 10 yet!! Only drivers for Windows 8.1 are available. Please provide the drivers for Windows 10, otherwise I’m not able play sound from my machine. Can someone please help? Thanks.
Try to install latest Realtek 2.79 version:http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs
-
Iphone device is not appearing in iTune
hi,
my iphone4 device is not appearing in itune. i have uninstall and install twice, using latest version10.4
others thing working for iphone but device is not locating on itune. i have checked going in device manager
where its showing iphone device and working properly. its working with other system but here in my acer vista 32 laptop not working.
can anyone help me out to get rid of it. i have tried all possible way and the troubleshoot guide still unable to overcome on it.Did you also check your security software settings? (copied from iOS: Device not recognized in iTunes for Windows) http://support.apple.com/kb/TS3125
Maybe you are looking for
-
Kernel Panic with AirDisk via Ethernet
Still conducting testing ... but I am getting sporadic Kernel Panics when my iMac is connected via ethernet. Seems to occur most with big files or multiple files. Seems ok with wireless, not sure if it could also be cable .. but anybody who is using
-
Hi all, I have to perform a query like x,y not in(select x,y from k). How to do this. These two columns are composite primary keys in both tables although no references exists. A sample table and expected result. create table v(name varchar(10),place
-
I've upgraded to Mavericks and now my mail opens, freezes breifly then crashes... any ideas? Here's the report for those that understand.. Process: Mail [253] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.ap
-
Will the indexes be ignored when using IMPDP...TABLE_EXISTS_ACTION=SKIP?
Hi guys, 11gr2 suppose that i have a .dmp file which has tables, indexes, and data, and i also have a schema A which already contains tables and data, without indexes is it possible to use IMPDP to import(or say create) all indexes from .dmp to schem
-
Delivery created without Stock
Hi all, I'm using Function Module SHP_VL10_DELIVERY_CREATE to create a delivery with reference to Sales Order. Everything is working fine, with one exception: The delivery is always created, even when the salesOrder is block without stock confirma